undercloud.conf.sample

[DEFAULT]

#
# From instack-undercloud
#

# Local file path to the necessary images. The path should be a
# directory readable by the current user that contains the full set of
# images. (string value)
#image_path = .

# Fully qualified hostname (including domain) to set on the
# Undercloud. If left unset, the current hostname will be used, but
# the user is responsible for configuring all system hostname settings
# appropriately.  If set, the undercloud install will configure all
# system hostname settings. (string value)
#undercloud_hostname = <None>

# IP information for the interface on the Undercloud that will be
# handling the PXE boots and DHCP for Overcloud instances.  The IP
# portion of the value will be assigned to the network interface
# defined by local_interface, with the netmask defined by the prefix
# portion of the value. (string value)
#local_ip = 192.0.2.1/24

# Network gateway for the Neutron-managed network for Overcloud
# instances. This should match the local_ip above when using
# masquerading. (string value)
#network_gateway = 192.0.2.1

# Virtual IP address to use for the public endpoints of Undercloud
# services. Only used with SSL. (string value)
#undercloud_public_vip = 192.0.2.2

# Virtual IP address to use for the admin endpoints of Undercloud
# services. Only used with SSL. (string value)
#undercloud_admin_vip = 192.0.2.3

# Certificate file to use for OpenStack service SSL connections.
# Setting this enables SSL for the OpenStack API endpoints, leaving it
# unset disables SSL. (string value)
#undercloud_service_certificate =

# When set to True, an SSL certificate will be generated as part of
# the undercloud install and this certificate will be used in place of
# the value for undercloud_service_certificate.  The resulting
# certificate will be written to
# /etc/pki/tls/certs/undercloud-[undercloud_public_vip].pem.  This
# certificate is signed by CA selected by the
# "certificate_generation_ca" option. (boolean value)
#generate_service_certificate = false

# The certmonger nickname of the CA from which the certificate will be
# requested. This is used only if the generate_service_certificate
# option is set. Note that if the "local" CA is selected the
# certmonger's local CA certificate will be extracted to /etc/pki/ca-
# trust/source/anchors/cm-local-ca.pem and subsequently added to the
# trust chain. (string value)
#certificate_generation_ca = local

# The kerberos principal for the service that will use the
# certificate. This is only needed if your CA requires a kerberos
# principal. e.g. with FreeIPA. (string value)
#service_principal =

# Network interface on the Undercloud that will be handling the PXE
# boots and DHCP for Overcloud instances. (string value)
#local_interface = eth1

# MTU to use for the local_interface. (integer value)
#local_mtu = 1500

# Network CIDR for the Neutron-managed network for Overcloud
# instances. This should be the subnet used for PXE booting. The
# current default for this value is 192.0.2.0/24, but this is
# deprecated due to it being a non-routable CIDR under RFC 5737. The
# default value for this option will be changed in the Ocata release.
# A different, valid CIDR should be selected to avoid problems. If an
# overcloud has already been deployed with the 192.0.2.0/24 CIDR and
# therefore the CIDR cannot be changed, you must set this option to
# 192.0.2.0/24 explicitly to avoid it changing in future releases, and
# all other network options related to the CIDR (e.g. local_ip) must
# also be set to maintain a valid configuration. (string value)
#network_cidr = 192.0.2.0/24

# Network that will be masqueraded for external access, if required.
# This should be the subnet used for PXE booting. (string value)
#masquerade_network = 192.0.2.0/24

# Start of DHCP allocation range for PXE and DHCP of Overcloud
# instances. (string value)
#dhcp_start = 192.0.2.5

# End of DHCP allocation range for PXE and DHCP of Overcloud
# instances. (string value)
#dhcp_end = 192.0.2.24

# Path to hieradata override file. If set, the file will be copied
# under /etc/puppet/hieradata and set as the first file in the hiera
# hierarchy. This can be used to to custom configure services beyond
# what undercloud.conf provides (string value)
#hieradata_override =

# Path to network config override template. If set, this template will
# be used to configure the networking via os-net-config. Must be in
# json format. Templated tags can be used within the template, see
# instack-undercloud/elements/undercloud-stack-config/net-
# config.json.template for example tags (string value)
#net_config_override =

# Network interface on which inspection dnsmasq will listen.  If in
# doubt, use the default value. (string value)
# Deprecated group/name - [DEFAULT]/discovery_interface
#inspection_interface = br-ctlplane

# Temporary IP range that will be given to nodes during the inspection
# process.  Should not overlap with the range defined by dhcp_start
# and dhcp_end, but should be in the same network. (string value)
# Deprecated group/name - [DEFAULT]/discovery_iprange
#inspection_iprange = 192.0.2.100,192.0.2.120

# Whether to enable extra hardware collection during the inspection
# process. Requires python-hardware or python-hardware-detect package
# on the introspection image. (boolean value)
#inspection_extras = true

# Whether to run benchmarks when inspecting nodes. Requires
# inspection_extras set to True. (boolean value)
# Deprecated group/name - [DEFAULT]/discovery_runbench
#inspection_runbench = false

# Whether to support introspection of nodes that have UEFI-only
# firmware. (boolean value)
#inspection_enable_uefi = true

# Whether to enable the debug log level for Undercloud OpenStack
# services. (boolean value)
#undercloud_debug = true

# Whether to install Tempest in the Undercloud. (boolean value)
#enable_tempest = true

# Whether to install Mistral services in the Undercloud. (boolean
# value)
#enable_mistral = true

# Whether to install Zaqar services in the Undercloud. (boolean value)
#enable_zaqar = true

# Whether to install Telemetry services (ceilometer, aodh) in the
# Undercloud. (boolean value)
#enable_telemetry = true

# Whether to install the TripleO UI. (boolean value)
#enable_ui = true

# Whether to install requirements to run the TripleO validations.
# (boolean value)
#enable_validations = true

# Whether to use iPXE for deploy and inspection. (boolean value)
# Deprecated group/name - [DEFAULT]/ipxe_deploy
#ipxe_enabled = true

# Whether to store events in the Undercloud Ceilometer. (boolean
# value)
#store_events = false

# Maximum number of attempts the scheduler will make when deploying
# the instance. You should keep it greater or equal to the number of
# bare metal nodes you expect to deploy at once to work around
# potential race condition when scheduling. (integer value)
# Minimum value: 1
#scheduler_max_attempts = 30

# Whether to clean overcloud nodes (wipe the hard drive) between
# deployments and after the introspection. (boolean value)
#clean_nodes = false


[auth]

#
# From instack-undercloud
#

# Password used for MySQL databases. If left unset, one will be
# automatically generated. (string value)
#undercloud_db_password = <None>

# Keystone admin token. If left unset, one will be automatically
# generated. (string value)
#undercloud_admin_token = <None>

# Keystone admin password. If left unset, one will be automatically
# generated. (string value)
#undercloud_admin_password = <None>

# Glance service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_glance_password = <None>

# Heat db encryption key(must be 16, 24, or 32 characters. If left
# unset, one will be automatically generated. (string value)
#undercloud_heat_encryption_key = <None>

# Heat service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_heat_password = <None>

# Neutron service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_neutron_password = <None>

# Nova service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_nova_password = <None>

# Ironic service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_ironic_password = <None>

# Aodh service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_aodh_password = <None>

# Ceilometer service password. If left unset, one will be
# automatically generated. (string value)
#undercloud_ceilometer_password = <None>

# Ceilometer metering secret. If left unset, one will be automatically
# generated. (string value)
#undercloud_ceilometer_metering_secret = <None>

# Ceilometer snmpd read-only user. If this value is changed from the
# default, the new value must be passed in the overcloud environment
# as the parameter SnmpdReadonlyUserName. This value must be between 1
# and 32 characters long. (string value)
#undercloud_ceilometer_snmpd_user = ro_snmp_user

# Ceilometer snmpd password. If left unset, one will be automatically
# generated. (string value)
#undercloud_ceilometer_snmpd_password = <None>

# Swift service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_swift_password = <None>

# Mistral service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_mistral_password = <None>

# Rabbitmq cookie. If left unset, one will be automatically generated.
# (string value)
#undercloud_rabbit_cookie = <None>

# Rabbitmq password. If left unset, one will be automatically
# generated. (string value)
#undercloud_rabbit_password = <None>

# Rabbitmq username. If left unset, one will be automatically
# generated. (string value)
#undercloud_rabbit_username = <None>

# Heat stack domain admin password. If left unset, one will be
# automatically generated. (string value)
#undercloud_heat_stack_domain_admin_password = <None>

# Swift hash suffix. If left unset, one will be automatically
# generated. (string value)
#undercloud_swift_hash_suffix = <None>

# HAProxy stats password. If left unset, one will be automatically
# generated. (string value)
#undercloud_haproxy_stats_password = <None>

# Zaqar password. If left unset, one will be automatically generated.
# (string value)
#undercloud_zaqar_password = <None>

# Horizon secret key. If left unset, one will be automatically
# generated. (string value)
#undercloud_horizon_secret_key = <None>