ovs-sandbox

#! /bin/sh
#
# Copyright (c) 2013, 2015, 2016 Nicira, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

set -e

run() {
    (cd "$sandbox" && "$@") || exit 1
}

run_xterm() {
    title=$1;
    shift
    run xterm -T "$title" -e "$@"  &
}

rungdb() {
    under_gdb=$1
    gdb_run=$2
    shift
    shift

    # Remove the --detach and to put the process under gdb control.
    # Also remove --vconsole:off to allow error message to show up
    # on the console.
    # Use "DISPLAY" variable to determine out if X is supported
    if $under_gdb && [ "$DISPLAY" ]; then
        args=`echo $@ |sed s/--detach//g | sed s/--vconsole:off//g`
        xterm_title=$1

        gdb_cmd=""
        if $gdb_run; then
            gdb_cmd="-ex run"
        fi

        run_xterm $xterm_title gdb $gdb_cmd --args $args
    else
        run $@
    fi
}

gdb_vswitchd=false
gdb_ovsdb=false
gdb_vswitchd_ex=false
gdb_ovsdb_ex=false
gdb_ovn_northd=false
gdb_ovn_northd_ex=false
gdb_ovn_controller=false
gdb_ovn_controller_ex=false
gdb_ovn_controller_vtep=false
gdb_ovn_controller_vtep_ex=false
builddir=
srcdir=
schema=
installed=false
built=false
ovn=false
ovnsb_schema=
ovnnb_schema=
ovn_rbac=true
dummy=override

for option; do
    # This option-parsing mechanism borrowed from a Autoconf-generated
    # configure script under the following license:

    # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
    # 2002, 2003, 2004, 2005, 2006, 2009, 2013 Free Software Foundation, Inc.
    # This configure script is free software; the Free Software Foundation
    # gives unlimited permission to copy, distribute and modify it.

    # If the previous option needs an argument, assign it.
    if test -n "$prev"; then
        eval $prev=\$option
        prev=
        continue
    fi
    case $option in
        *=*) optarg=`expr "X$option" : '[^=]*=\(.*\)'` ;;
        *) optarg=yes ;;
    esac

    case $dashdash$option in
        --)
            dashdash=yes ;;
        -h|--help)
            cat <<EOF
ovs-sandbox, for starting a sandboxed dummy Open vSwitch environment
usage: $0 [OPTION...]

If you run ovs-sandbox from an OVS build directory, it uses the OVS that
you built.  Otherwise, if you have an installed Open vSwitch, it uses
the installed version.

These options force ovs-sandbox to use a particular OVS build:
  -b, --builddir=DIR   specify Open vSwitch build directory
  -s, --srcdir=DIR     specify Open vSwitch source directory
These options force ovs-sandbox to use an installed Open vSwitch:
  -i, --installed      use installed Open vSwitch
  -g, --gdb-vswitchd   run ovs-vswitchd under gdb
  -d, --gdb-ovsdb      run ovsdb-server under gdb
  --gdb-ovn-northd     run ovn-northd under gdb
  --gdb-ovn-controller run ovn-controller under gdb
  --gdb-ovn-controller-vtep run ovn-controller-vtep under gdb
  --dummy=ARG          pass --enable-dummy=ARG to vswitchd (default: override)
  -R, --gdb-run        automatically start running the daemon in gdb
                       for any daemon set to run under gdb
  -S, --schema=FILE    use FILE as vswitch.ovsschema
  -o, --ovn            enable OVN
  --no-ovn-rbac        disable role-based access control for OVN

Other options:
  -h, --help           Print this usage message.
EOF
            exit 0
            ;;

        --b*=*)
            builddir=$optarg
            built=:
            ;;
        -b|--b*)
            prev=builddir
            built=:
            ;;
        --sr*=*)
            srcdir=$optarg
            built=false
            ;;
        --dummy)
            prev=dummy
            ;;
        --dummy=*)
            dummy=$optarg
            ;;
        -s|--sr*)
            prev=srcdir
            built=false
            ;;
        -i|--installed)
            installed=:
            ;;
        --sc*=*)
            schema=$optarg
            installed=:
            ;;
        -S|--sc*)
            prev=schema
            installed=:
            ;;
        -g|--gdb-v*)
            gdb_vswitchd=true
            gdb_vswitchd_ex=false
            ;;
        -e|--gdb-ex-v*)
            gdb_vswitchd=true
            gdb_vswitchd_ex=true
            ;;
        -d|--gdb-ovsdb)
            gdb_ovsdb=true
            gdb_ovsdb_ex=false
            ;;
        -r|--gdb-ex-o*)
            gdb_ovsdb=true
            gdb_ovsdb_ex=true
            ;;
        --gdb-ovn-northd)
            gdb_ovn_northd=true
            ;;
        --gdb-ovn-controller)
            gdb_ovn_controller=true
            ;;
        --gdb-ovn-controller-vtep)
            gdb_ovn_controller_vtep=true
            ;;
        -o|--ovn)
            ovn=true
            ;;
        --no-ovn-rbac)
            ovn_rbac=false
            ;;
        -R|--gdb-run)
            gdb_vswitchd_ex=true
            gdb_ovsdb_ex=true
            gdb_ovn_northd_ex=true
            gdb_ovn_controller_ex=true
            gdb_ovn_controller_vtep_ex=true
            ;;
        -*)
            echo "unrecognized option $option (use --help for help)" >&2
            exit 1
            ;;
        *)
            echo "$option: non-option arguments not supported (use --help for help)" >&2
            exit 1
            ;;
    esac
    shift
done

if $installed && $built; then
    echo "sorry, conflicting options (use --help for help)" >&2
    exit 1
elif $installed || $built; then
    :
elif test -e vswitchd/ovs-vswitchd; then
    built=:
    builddir=.
elif (ovs-vswitchd --version) >/dev/null 2>&1; then
    installed=:
else
    echo "can't find an OVS build or install (use --help for help)" >&2
    exit 1
fi

if $built; then
    if test ! -e "$builddir"/vswitchd/ovs-vswitchd; then
        echo "$builddir does not appear to be an OVS build directory" >&2
        exit 1
    fi
    builddir=`cd $builddir && pwd`

    # Find srcdir.
    case $srcdir in
        '')
            srcdir=$builddir
            if test ! -e "$srcdir"/README.rst; then
                srcdir=`cd $builddir/.. && pwd`
            fi
            ;;
        /*) ;;
        *) srcdir=`pwd`/$srcdir ;;
    esac
    schema=$srcdir/vswitchd/vswitch.ovsschema
    if test ! -e "$schema"; then
        echo >&2 'source directory not found, please use --srcdir'
        exit 1
    fi
    if $ovn; then
        ovnsb_schema=$srcdir/ovn/ovn-sb.ovsschema
        if test ! -e "$ovnsb_schema"; then
            echo >&2 'source directory not found, please use --srcdir'
            exit 1
        fi
        ovnnb_schema=$srcdir/ovn/ovn-nb.ovsschema
        if test ! -e "$ovnnb_schema"; then
            echo >&2 'source directory not found, please use --srcdir'
            exit 1
        fi
        vtep_schema=$srcdir/vtep/vtep.ovsschema
        if test ! -e "$vtep_schema"; then
            echo >&2 'source directory not found, please use --srcdir'
            exit 1
        fi
    fi

    # Put built tools early in $PATH.
    if test ! -e $builddir/vswitchd/ovs-vswitchd; then
        echo >&2 'build not found, please change set $builddir or change directory'
        exit 1
    fi
    PATH=$builddir/ovsdb:$builddir/vswitchd:$builddir/utilities:$builddir/vtep:$PATH
    if $ovn; then
        PATH=$builddir/ovn/controller:$builddir/ovn/controller-vtep:$builddir/ovn/northd:$builddir/ovn/utilities:$PATH
    fi
    export PATH
else
    case $schema in
        '')
            for schema in \
                /usr/local/share/openvswitch/vswitch.ovsschema \
                /usr/share/openvswitch/vswitch.ovsschema \
                none; do
                if test -r $schema; then
                    break
                fi
            done
            ;;
        /*) ;;
        *) schema=`pwd`/$schema ;;
    esac
    if test ! -r "$schema"; then
        echo "can't find vswitch.ovsschema, please specify --schema" >&2
        exit 1
    fi
    if $ovn; then
        echo "running with ovn is only supported from the build dir." >&2
        exit 1
    fi
fi

# Create sandbox.
rm -rf sandbox
mkdir sandbox
sandbox=`cd sandbox && pwd`

# Set up environment for OVS programs to sandbox themselves.
OVS_RUNDIR=$sandbox; export OVS_RUNDIR
OVS_LOGDIR=$sandbox; export OVS_LOGDIR
OVS_DBDIR=$sandbox; export OVS_DBDIR
OVS_SYSCONFDIR=$sandbox; export OVS_SYSCONFDIR

if $built; then
    # Easy access to OVS manpages.
    (cd "$builddir" && ${MAKE-make} install-man install-man-rst mandir="$sandbox"/man)
    MANPATH=$sandbox/man:; export MANPATH
fi

# Ensure cleanup.
trap 'kill `cat "$sandbox"/*.pid`' 0 1 2 3 13 14 15

# Create database and start ovsdb-server.
touch "$sandbox"/.conf.db.~lock~
run ovsdb-tool create conf.db "$schema"
ovsdb_server_args=
if $ovn; then
    touch "$sandbox"/.ovnsb.db.~lock~
    touch "$sandbox"/.ovnnb.db.~lock~
    run ovsdb-tool create ovnsb.db "$ovnsb_schema"
    run ovsdb-tool create ovnsb2.db "$ovnsb_schema"
    run ovsdb-tool create ovnnb.db "$ovnnb_schema"
    run ovsdb-tool create vtep.db "$vtep_schema"
    ovsdb_server_args="vtep.db conf.db"
    ovsdb_sb_server_args="ovnsb.db"
    ovsdb_sb_backup_server_args="ovnsb2.db"
    ovsdb_nb_server_args="ovnnb.db"

    if [ "$HAVE_OPENSSL" = yes ]; then
        OVS_PKI="run ovs-pki --dir=$sandbox/pki --log=$sandbox/ovs-pki.log"
        $OVS_PKI -B 1024 init
        $OVS_PKI -B 1024 req+sign ovnsb switch
        $OVS_PKI -B 1024 req+sign ovnnb switch
        $OVS_PKI -B 1024 -u req+sign chassis-1 switch
    fi
fi
rungdb $gdb_ovsdb $gdb_ovsdb_ex ovsdb-server --detach --no-chdir --pidfile -vconsole:off --log-file \
    --remote=punix:"$sandbox"/db.sock $ovsdb_server_args
if $ovn; then
    rungdb $gdb_ovsdb $gdb_ovsdb_ex ovsdb-server --detach --no-chdir \
        --pidfile="$sandbox"/ovnnb_db.pid -vconsole:off \
        --log-file="$sandbox"/ovnnb_db.log \
        --remote=db:OVN_Northbound,NB_Global,connections \
        --private-key=db:OVN_Northbound,SSL,private_key \
        --certificate=db:OVN_Northbound,SSL,certificate \
        --ca-cert=db:OVN_Northbound,SSL,ca_cert \
        --ssl-protocols=db:OVN_Northbound,SSL,ssl_protocols \
        --ssl-ciphers=db:OVN_Northbound,SSL,ssl_ciphers \
        --remote=punix:"$sandbox"/ovnnb_db.sock $ovsdb_nb_server_args
    rungdb $gdb_ovsdb $gdb_ovsdb_ex ovsdb-server --detach --no-chdir \
        --pidfile="$sandbox"/ovnsb_db.pid -vconsole:off \
        --log-file="$sandbox"/ovnsb_db.log \
        --remote=db:OVN_Southbound,SB_Global,connections \
        --private-key=db:OVN_Southbound,SSL,private_key \
        --certificate=db:OVN_Southbound,SSL,certificate \
        --ca-cert=db:OVN_Southbound,SSL,ca_cert \
        --ssl-protocols=db:OVN_Southbound,SSL,ssl_protocols \
        --ssl-ciphers=db:OVN_Southbound,SSL,ssl_ciphers \
        --remote=punix:"$sandbox"/ovnsb_db.sock $ovsdb_sb_server_args
    # Start SB back up server
    rungdb $gdb_ovsdb $gdb_ovsdb_ex ovsdb-server --detach --no-chdir \
        --pidfile="$sandbox"/ovnsb_db2.pid  -vconsole:off \
        --log-file="$sandbox"/ovnsb_db2.log \
        --private-key=db:OVN_Southbound,SSL,private_key \
        --certificate=db:OVN_Southbound,SSL,certificate \
        --ca-cert=db:OVN_Southbound,SSL,ca_cert \
        --remote=punix:"$sandbox"/ovnsb_db2.sock \
        --unixctl="$sandbox"/sb_backup_unixctl \
        --sync-from=unix:"$sandbox"/ovnsb_db.sock $ovsdb_sb_backup_server_args
fi

#Add a small delay to allow ovsdb-server to launch.
sleep 0.1

#Wait for ovsdb-server to finish launching.
if test ! -e "$sandbox"/db.sock; then
    printf "Waiting for ovsdb-server to start..."
    while test ! -e "$sandbox"/db.sock; do
        sleep 1;
    done
    echo "  Done"
fi

# Initialize database.
run ovs-vsctl --no-wait -- init

# Start ovs-vswitchd.
rungdb $gdb_vswitchd $gdb_vswitchd_ex ovs-vswitchd --detach --no-chdir --pidfile -vconsole:off --log-file \
    --enable-dummy=$dummy -vvconn -vnetdev_dummy

if $ovn; then
    ovn-nbctl init
    ovn-sbctl init

    ovs-vsctl set open . external-ids:system-id=chassis-1
    ovs-vsctl set open . external-ids:hostname=sandbox
    ovs-vsctl set open . external-ids:ovn-encap-type=geneve
    ovs-vsctl set open . external-ids:ovn-encap-ip=127.0.0.1

    if [ "$HAVE_OPENSSL" = yes ]; then
        ovn-nbctl set-ssl $sandbox/ovnnb-privkey.pem  $sandbox/ovnnb-cert.pem $sandbox/pki/switchca/cacert.pem
        ovn-nbctl set-connection pssl:6641
        ovn-sbctl set-ssl $sandbox/ovnsb-privkey.pem  $sandbox/ovnsb-cert.pem $sandbox/pki/switchca/cacert.pem
        if $ovn_rbac; then
            ovn-sbctl set-connection role=ovn-controller pssl:6642
        else
            ovn-sbctl set-connection pssl:6642
        fi
        ovs-vsctl set open . external-ids:ovn-remote=ssl:127.0.0.1:6642
        OVN_CTRLR_PKI="-p $sandbox/chassis-1-privkey.pem -c $sandbox/chassis-1-cert.pem -C $sandbox/pki/switchca/cacert.pem"
    else
        ovs-vsctl set open . external-ids:ovn-remote=unix:"$sandbox"/ovnsb_db.sock
        OVN_CTRLR_PKI=""
    fi
    rungdb $gdb_ovn_northd $gdb_ovn_northd_ex ovn-northd --detach \
        --no-chdir --pidfile -vconsole:off --log-file \
        --ovnsb-db=unix:"$sandbox"/ovnsb_db.sock \
        --ovnnb-db=unix:"$sandbox"/ovnnb_db.sock
    rungdb $gdb_ovn_controller $gdb_ovn_controller_ex ovn-controller \
        $OVN_CTRLR_PKI --detach --no-chdir --pidfile -vconsole:off --log-file
    rungdb $gdb_ovn_controller_vtep $gdb_ovn_controller_vtep_ex \
        ovn-controller-vtep --detach --no-chdir --pidfile -vconsole:off \
        $OVN_CTRLR_PKI --log-file --ovnsb-db=unix:"$sandbox"/ovnsb_db.sock
fi

cat <<EOF



----------------------------------------------------------------------
You are running in a dummy Open vSwitch environment.  You can use
ovs-vsctl, ovs-ofctl, ovs-appctl, and other tools to work with the
dummy switch.

EOF
if $ovn; then cat << EOF
This environment also has the OVN daemons and databases enabled.
You can use ovn-nbctl and ovn-sbctl to interact with the OVN databases.

The backup server of OVN SB can be accessed by:
* ovn-sbctl --db=unix:`pwd`/sandbox/ovnsb_db2.sock
* ovs-appctl -t `pwd`/sandbox/sb_backup_unixctl
The backup database file is "sandbox"/ovnsb2.db


EOF
fi
cat <<EOF
Log files, pidfiles, and the configuration database are in the
"sandbox" subdirectory.

Exit the shell to kill the running daemons.
EOF

status=0; $SHELL || status=$?

cat <<EOF
----------------------------------------------------------------------



EOF

exit $status