The AVP module

Jiri Kuthan

   FhG Fokus
   <[email protected]>

Michal Matyska

   iptel
   <[email protected]>

   Copyright © 2004, 2005, 2006 FhG FOKUS, iptelorg GmbH
     __________________________________________________________________

   Table of Contents

   1. Admin Guide

        1. Overview
        2. Functions

              2.1. set_iattr(attribute, value)
              2.2. flags2attr("$avp")
              2.3. set_sattr(attribute, value)
              2.4. print_attr($attribute)
              2.5. attr2uri($attribute[, uri-part])
              2.6. attr_exists(attribute)
              2.7. attr_equals(attribute, value)
              2.8. attr_equals_xl(attribute, xl_format)
              2.9. dump_attrs()
              2.10. xlset_attr($attribute, xl_format)
              2.11. xlfix_attr($attribute)
              2.12. insert_attr_hf(name)
              2.13. insert_attr_hf(header_name, $avp_name)
              2.14. append_attr_hf(name)
              2.15. append_attr_hf(header_name, $avp_name)
              2.16. replace_attr_hf(name)
              2.17. replace_attr_hf(header_name, $avp_name)
              2.18. attr_to_reply(name)
              2.19. attr_to_reply(header_name, $avp_name)
              2.20. attr_destination($avp_name)
              2.21. xlset_destination(xl_format)
              2.22. subst_attr($avp_name, subst_re)
              2.23. del_attr($avp_name)
              2.24. hdr_body2attrs(headername, prefix)
              2.25. hdr_body2attrs2(headername, prefix)

        3. Parameters

              3.1. xlbuf_size (integer)

   List of Examples

   1.1. set_iattr usage
   1.2. flags2attr usage
   1.3. set_sattr usage
   1.4. attr_exists usage
   1.5. attr_equals_xl usage
   1.6. insert_attr_hf usage
   1.7. attr_to_reply usage
   1.8. attr_destination usage
   1.9. xlset_destination usage
   1.10. subst_attr usage
   1.11. del_attr usage
   1.12. hdr_body2attrs and hdr_body2attrs2 usage
   1.13. Set xlbuf_size parameter

Chapter 1. Admin Guide

   Table of Contents

   1. Overview
   2. Functions

        2.1. set_iattr(attribute, value)
        2.2. flags2attr("$avp")
        2.3. set_sattr(attribute, value)
        2.4. print_attr($attribute)
        2.5. attr2uri($attribute[, uri-part])
        2.6. attr_exists(attribute)
        2.7. attr_equals(attribute, value)
        2.8. attr_equals_xl(attribute, xl_format)
        2.9. dump_attrs()
        2.10. xlset_attr($attribute, xl_format)
        2.11. xlfix_attr($attribute)
        2.12. insert_attr_hf(name)
        2.13. insert_attr_hf(header_name, $avp_name)
        2.14. append_attr_hf(name)
        2.15. append_attr_hf(header_name, $avp_name)
        2.16. replace_attr_hf(name)
        2.17. replace_attr_hf(header_name, $avp_name)
        2.18. attr_to_reply(name)
        2.19. attr_to_reply(header_name, $avp_name)
        2.20. attr_destination($avp_name)
        2.21. xlset_destination(xl_format)
        2.22. subst_attr($avp_name, subst_re)
        2.23. del_attr($avp_name)
        2.24. hdr_body2attrs(headername, prefix)
        2.25. hdr_body2attrs2(headername, prefix)

   3. Parameters

        3.1. xlbuf_size (integer)

1. Overview

   This module contains several functions that can be used to manipulate
   the contents of AVPs (Attribute-Value pairs). The AVPs are variables
   attached to the SIP message being processed. Each variable has its name
   and value. AVPs can be used to store arbitrary data or as a means of
   inter-module communication.

   You may also want to check the avpops module which is more flexible and
   contains more functions. In future Kamailio releases the avp module
   will be probably deprecated in favor of avpops module.

2. Functions

   2.1. set_iattr(attribute, value)
   2.2. flags2attr("$avp")
   2.3. set_sattr(attribute, value)
   2.4. print_attr($attribute)
   2.5. attr2uri($attribute[, uri-part])
   2.6. attr_exists(attribute)
   2.7. attr_equals(attribute, value)
   2.8. attr_equals_xl(attribute, xl_format)
   2.9. dump_attrs()
   2.10. xlset_attr($attribute, xl_format)
   2.11. xlfix_attr($attribute)
   2.12. insert_attr_hf(name)
   2.13. insert_attr_hf(header_name, $avp_name)
   2.14. append_attr_hf(name)
   2.15. append_attr_hf(header_name, $avp_name)
   2.16. replace_attr_hf(name)
   2.17. replace_attr_hf(header_name, $avp_name)
   2.18. attr_to_reply(name)
   2.19. attr_to_reply(header_name, $avp_name)
   2.20. attr_destination($avp_name)
   2.21. xlset_destination(xl_format)
   2.22. subst_attr($avp_name, subst_re)
   2.23. del_attr($avp_name)
   2.24. hdr_body2attrs(headername, prefix)
   2.25. hdr_body2attrs2(headername, prefix)

2.1. set_iattr(attribute, value)

   Create an AVP of type integer.

   Meaning of the parameter is as follows:
     * attribute - The name of the AVP to be created.
     * value - Integer value of the AVP.

   Example 1.1. set_iattr usage
...
set_iattr("fr_inv_timer", "60")
...

2.2. flags2attr("$avp")

   Store the current state of Kamailio flags into the specified AVP.

   Example 1.2. flags2attr usage
...
flags2attr("$msg_flags")
...

2.3. set_sattr(attribute, value)

   Create an AVP of type string.

   Meaning of the parameter is as follows:
     * attribute - The name of the AVP to be created.
     * value - String value of the AVP.

   Example 1.3. set_sattr usage
...
set_sattr("called_number", "1234")
...

2.4. print_attr($attribute)

   Print the value of an AVP to syslog.

   Meaning of the parameter is as follows:
     * attribute - The name of the AVP.

2.5. attr2uri($attribute[, uri-part])

   Rewrite the whole Request-URI of the message being processed with the
   value of an AVP, or if an uri-part is specified, rewrite only that
   specific part.

   Meaning of the parameter is as follows:
     * $attribute - The name of the AVP.
     * uri-part - The name of the part of the uri that will be rewritten.
       The supported values are: "prefix", "uri", "username", "user",
       "usernamepassword", "userpass", "domain", "host", "domainport",
       "hostport", "port", "strip", "strip_tail". "prefix" will add the
       AVP as a prefix to the username (equivalent to prefix("string")),
       "strip" and "strip_tail" expect a number in the AVP and they will
       remove the specified number of characters from the beginning,
       respective the end of the username part of the uri. The rest of the
       uri-part values names are self-explaining.

2.6. attr_exists(attribute)

   Test for the existence of AVP with given name. The function returns 1
   if given AVP exists and -1 if not.

   Meaning of the parameter is as follows:
     * attribute - The name of the AVP.

   Example 1.4. attr_exists usage
...
if (attr_exists("saved_ruri")) {
    attr2uri("saved_uri");
} else {
    rewriteuri("sip:[email protected]");
};
...

2.7. attr_equals(attribute, value)

   Test whether an AVP with given name and value exists. The function
   returns 1 if the AVP with given name and value exists and -1 if not.
   The value of the AVP is compared string-wise. The comparison is case
   sensitive.

   Meaning of the parameter is as follows:
     * attribute - The name of the AVP.
     * value - The AVP value to look for.

2.8. attr_equals_xl(attribute, xl_format)

   Test whether an AVP with given name and value exists. The function
   returns 1 if the AVP with given name and value exists and -1 if not.
   The value of the AVP is compared string-wise to the result of xprint
   formatting call. The comparison is case sensitive.

   Meaning of the parameter is as follows:
     * attribute - The name of the AVP.
     * xl_format - The xprint formatting string, result of which is looked
       for in AVP.

   Note: You must ensure, that the xprint module is loaded to be able to
   use this function.

   Example 1.5. attr_equals_xl usage
...
if (attr_equals_xl("my_avp", "%ct")) {
  # my_avp has value equal to current Contact header field
} else {
  # my_avp was different
}
...

2.9. dump_attrs()

   Dumps all AVPs in user lists to the debug output (with level INFO).

   The function does not require any parameters.

2.10. xlset_attr($attribute, xl_format)

   Creates new AVP identified by attribute and assigns the result string
   of xprint formatting rules as its value.

   Meaning of the parameter is as follows:
     * $attribute - The name of the AVP.
     * xl_format - String used for xprint formatting. For detailed info
       see documentation of xprint module.

   Note: You must ensure, that the xprint module is loaded to be able to
   use this function.

2.11. xlfix_attr($attribute)

   Fixes an xl formatted attribute value to pure string.

   Meaning of the parameter is as follows:
     * $attribute - The name of the AVP.

2.12. insert_attr_hf(name)

   Inserts new header into the request, which is being forwarded. The AVP
   name is the name of the header field. If you need to insert header with
   name which differs from the AVP name use insert_attr_hf(header_name,
   $avp_name) instead.

   Inserting means putting the header to the beginning of the request,
   before any others.

   Meaning of the parameter is as follows:
     * name - The name of the header field which is inserted into
       forwarded request as well as name of AVP which's value is put as
       the header field value.

2.13. insert_attr_hf(header_name, $avp_name)

   Inserts new header into the request, which is being forwarded.

   Inserting means putting the header to the beginning of the request,
   before any others.

   Meaning of the parameter is as follows:
     * header_name - The name of the header field which is inserted into
       forwarded request.
     * $avp_name - The name of AVP which's value is put as the header
       field value.

   Example 1.6. insert_attr_hf usage
...
set_sattr("my_route","<sip:user@host:port;lr>");
insert_attr_hf("Route", "$my_route");
...

2.14. append_attr_hf(name)

   Appends new header into the request, which is being forwarded. The AVP
   name is the name of the header field. If you need to append header with
   name which differs from the AVP name use append_attr_hf(header_name,
   $avp_name) instead.

   Appending means putting the header to the end of the request, after any
   others.

   Meaning of the parameter is as follows:
     * name - The name of the header field which is appended into
       forwarded request as well as name of AVP which's value is put as
       the header field value.

2.15. append_attr_hf(header_name, $avp_name)

   Appends new header into the request, which is being forwarded.

   Appending means putting the header to the end of the request, after any
   others.

   Meaning of the parameter is as follows:
     * header_name - The name of the header field which is appended into
       forwarded request.
     * $avp_name - The name of AVP which's value is put as the header
       field value.

2.16. replace_attr_hf(name)

   Replaces header in the request, which is being forwarded. The AVP name
   is the same as the name of the header field. If you need to replace
   header with name which differs from the AVP name use
   replace_attr_hf(header_name, $avp_name) instead.

   Replacing means removing all the headers with specified name and
   appending new one at the end, with the value from AVP.

   Meaning of the parameter is as follows:
     * name - The name of the header field which is replaced in forwarded
       request as well as name of AVP which's value is put as the header
       field value.

2.17. replace_attr_hf(header_name, $avp_name)

   Replaces header in the request, which is being forwarded.

   Replacing means removing all the headers with specified name and
   appending new one at the end, with the value from AVP.

   Meaning of the parameter is as follows:
     * header_name - The name of the header field which is replaced in
       forwarded request.
     * $avp_name - The name of AVP which's value is put as the header
       field value.

2.18. attr_to_reply(name)

   Appends new header into the reply at the request time processing. The
   AVP name is the name of the header field. If you need to append header
   with name which differs from the AVP name use
   attr_to_reply(header_name, $avp_name) instead.

   If you need to append headers during reply processing you can use
   insert_attr_hf and append_attr_hf. This function stores data and waits
   for the reply being created.

   Meaning of the parameter is as follows:
     * name - The name of the header field which is appended into reply as
       well as name of AVP which's value is put as the header field value.

2.19. attr_to_reply(header_name, $avp_name)

   Appends new header into the reply at the request time processing.

   Meaning of the parameter is as follows:
     * header_name - The name of the header field which is appended into
       reply.
     * $avp_name - The name of AVP which's value is put as the header
       field value.

   Example 1.7. attr_to_reply usage
...
xlset_attr("$my_route","<sip:%Hf:5080;lr>";
attr_to_reply("P-Hint-Route", "my_route");
...

2.20. attr_destination($avp_name)

   Sets the destination of the forwarded request to the value of AVP,
   which must be either a SIP URI or a string in nameaddr format (e.g.
   "Foo Bar" <sip:uri>).

   Meaning of the parameter is as follows:
     * $avp_name - The name of AVP which's value is used for further
       request forwarding.

   Example 1.8. attr_destination usage
...
xlset_attr("$my_route","<sip:%<next_host>:%<next_port>;myparam=a123;lr>");
insert_attr_hf("Route", "$my_route");
attr_destination("$my_route");
t_relay();
...

2.21. xlset_destination(xl_format)

   Sets the destination of the forwarded request to the value of result of
   xprint formatted string. Either SIP URI or nameaddr format is allowed.

   Meaning of the parameter is as follows:
     * xl_format - xprint module formatting string, the result is used for
       request forwarding.

   Note: You must ensure, that the xprint module is loaded to be able to
   use this function.

   Example 1.9. xlset_destination usage
...
xlset_destination("%<next_host>:%<next_port>");
t_relay();
...

2.22. subst_attr($avp_name, subst_re)

   The value of the AVP identified by $avp_name name is matched and
   substitued according to the subst_re sed like expression. Result of the
   substitution is then stored in the original AVP.

   Meaning of the parameter is as follows:
     * $avp_name - Name of the AVP which will be used for the
       substitution.
     * subst_re - SED like match&replace regullar expression.

   Example 1.10. subst_attr usage
...
subst_attr("$uri","/tel:[0-9]*/sip:\[email protected];user=phone/");
...

2.23. del_attr($avp_name)

   The AVP identified by $avp_name name is deleted.

   Meaning of the parameter is as follows:
     * $avp_name - Name of the AVP which will be deleted.

   Example 1.11. del_attr usage
...
failure_route[1] {
        if (status=~4[0-9][0-9]) {
                if (attr_exists("backup_gw") {
                        append_branch;
                        attr_destination("backup_gw");
                        del_attr("backup_gw");
                        t_relay();
                }
        }
...

2.24. hdr_body2attrs(headername, prefix)

   Function parses a header body content scans for fld1=val1,fld2=val2,...
   and creates bunch of avps prefixfld1:= val1, prefixfld2:= val2, .... If
   possible stores values as integers.

   Meaning of the parameter is as follows:
     * headername - The header name, which will be scanned for the
       name=value pairs.
       If you want to create only AVPs with integer value use "/i" postfix
       to the header name.
       If you want to create only AVPs with string value use "/s" postfix
       to the header name.
     * prefix - The prefix, which is added before the name parsed from the
       header body.

2.25. hdr_body2attrs2(headername, prefix)

   Function parses a header body content scans for
   fld1=val1,val2;fld2=val3,... and creates bunch of avps prefixfld1#1:=
   val1, prefixfld1#2:= val2, prefixfld2:=val3 .... If possible stores
   values as integers.

   Meaning of the parameter is as follows:
     * headername - The header name, which will be scanned for the
       name=value pairs.
       If you want to create only AVPs with integer value use "/i" postfix
       to the header name.
       If you want to create only AVPs with string value use "/s" postfix
       to the header name.
     * prefix - The prefix, which is added before the name parsed from the
       header body.

   Example 1.12. hdr_body2attrs and hdr_body2attrs2 usage
if (method=="BYE") {
        # QoS reporting
        if (search("^User-Agent: AVM FRITZ!Box Fon*")) {
                hdr_body2attrs2("X-RTP-Stat/i", "QoS_");
                xplog("L_INFO", "QoS: %Ts, %fu, %tu, %ci, %{User-Agent}, %{X-RTP
-Stat}\n");
        } else if (search("^User-Agent: Sipura/*")) {
                hdr_body2attrs("P-RTP-Stat/i", "QoS_");
                xplog("L_INFO", "QoS: %Ts, %fu, %tu, %ci, %{User-Agent}, %{P-RTP
-Stat}\n");
        }
}
# AVP QoS_xx now contain the values from appropriate header
# e.g. QoS_JI is jitter

3. Parameters

   3.1. xlbuf_size (integer)

3.1. xlbuf_size (integer)

   Defines size of internal buffer for all xprint formatting calls. If you
   don't use xprint formatting calls, you can set it to 0 to preserve some
   memory, if you get errors while formatting due to buffer size, you can
   enlarge it.

   Default value is 256.

   Example 1.13. Set xlbuf_size parameter
...
modparam("avp", "xlbuf_size", 1024)
...