TySOM is a family of development boards for embedded applications that features Xilinx® Zynq™ all programmable module combining FPGA with ARM® Cortex processor. Plethora of included peripherals makes these boards useful in various embedded applications like Automotive, IoT, Industrial automation or embedded HPC.
Aldec provides the following list of boards:
- TySOM-3A (Xilinx Zynq UltraScale+ ZU19EG)
- TySOM-3 (Xilinx Zynq UltraScale+ Zu7EV)
- TySOM-2 (Xilinx Zynq XC7Z045 or XC7Z100)
- TySOM-2A (Xilinx Zynq XC7Z030)
- TySOM-1 (Xilinx Zynq XC7Z030)
- TySOM-1A (Xilinx Zynq XC7Z010)
TySOM-3A, TySOM-3, TySOM-2 and TySOM-2A families contain FMC connectors which can be used to extend devices and peripherals not included in TySOM boards. Due to non-proprietary connectors like FMC Daughter Cards can be reused across different hardware platforms.
Daughter Cards provided by Aldec:
Vivado board definition files contain configuration of Processing System and interfaces available on the board to simplify using the Aldec TySOM board in Xilinx Vivado tool.
The board definition files for all TySOM boards can be found in Vivado-board_files folder.
Document contains all necessary information about using Aldec TySOM board in Xilinx Vivado tool with the board definition files.
The board definition files are provided for the following Aldec TySOM boards:
- TySOM-3A (Xilinx Zynq UltraScale+ ZU19EG)
- TySOM-3 (Xilinx Zynq UltraScale+ Zu7EV)
- TySOM-2 (Xilinx Zynq XC7Z045 or XC7Z100)
- TySOM-2A (Xilinx Zynq XC7Z030)
- TySOM-1 (Xilinx Zynq XC7Z030)
- TySOM-1A (Xilinx Zynq XC7Z010)
The board definition files contain also FMC cards definitions:
2018.3 version provided in this repo was tested with the following Vivado versions:
- 2018.3,
- 2019.1,
- 2020.2,
- 2021.2
The provided Vivado board files can be used with these versions.