diff --git a/ChangeLog b/ChangeLog index d6cdac18621..e7b251d02ca 100644 --- a/ChangeLog +++ b/ChangeLog @@ -4793,4 +4793,7 @@ * The STM32L-Discovery segment LCD is now functional and the README file includes instructions for adding the apps/examples/slcd segment LCD test as an NSH "built-in" command (2013-5-24). - + * configs/pcblogic-pic32mx: Converted all configurations to use the + kconfig-frontends tool (2013-5-25). + * configs/pcblogic-pic32mx/src: Renamed files using pic32mx_ vs up_ + prefix. Enable building of LCD1602 LCD (2013-5-25). diff --git a/Documentation/NuttX.html b/Documentation/NuttX.html index 0a79e91db23..23aa62d37e3 100644 --- a/Documentation/NuttX.html +++ b/Documentation/NuttX.html @@ -1739,7 +1739,11 @@

NuttX-6.27 Release Notes

-

The details, caveats and fine print follow:

+

+ Details. + The details, caveats and fine print follow. + For even more information see the README files that can be found here. +

diff --git a/Documentation/README.html b/Documentation/README.html index 1b2e27b81df..8605447a47f 100644 --- a/Documentation/README.html +++ b/Documentation/README.html @@ -209,8 +209,8 @@

NuttX README Files

| | | `- README.txt | | |- stm32f4discovery/ | | | `- README.txt - | | |- stm32fldiscovery/ - | | | `- README.txt + | | |- stm32ldiscovery/ + | | | `- README.txt | | |- sure-pic32mx/ | | | `- README.txt | | |- teensy/ diff --git a/README.txt b/README.txt index 6c2ac8490bd..1e4f289f09e 100644 --- a/README.txt +++ b/README.txt @@ -1137,7 +1137,7 @@ nuttx | | `- README.txt | |- stm32f4discovery/ | | `- README.txt - | |- stm32f1discovery/ + | |- stm32ldiscovery/ | | `- README.txt | |- sure-pic32mx/ | | `- README.txt diff --git a/configs/pcblogic-pic32mx/README.txt b/configs/pcblogic-pic32mx/README.txt index 5fd4ba6f268..22815ae0c42 100644 --- a/configs/pcblogic-pic32mx/README.txt +++ b/configs/pcblogic-pic32mx/README.txt @@ -1,10 +1,10 @@ configs/pic32mx README ===================== -This README file discusses the port of NuttX to the PIC32MX board from -PCB Logic Design Co. This board features the MicroChip PIC32MX460F512L. -The board is a very simple -- little more than a carrier for the PIC32 -MCU plus voltage regulation, debug interface, and an OTG connector. + This README file discusses the port of NuttX to the PIC32MX board from + PCB Logic Design Co. This board features the MicroChip PIC32MX460F512L. + The board is a very simple -- little more than a carrier for the PIC32 + MCU plus voltage regulation, debug interface, and an OTG connector. Contents ======== @@ -13,6 +13,7 @@ Contents MAX3232 Connection Toolchains Loading NuttX with PICkit2 + LCD1602 PIC32MX Configuration Options Configurations @@ -324,6 +325,35 @@ Loading NuttX with PICkit2 mkpichex $PWD # Convert addresses in nuttx.hex. $PWD is the path # to the top-level build directory. It is the only # required input to mkpichex. +LCD1602 +======= + The LCD1602 is an HD4478OU-based LCD from Wave share. The function + up_lcd1602_initialize() initializes the LCD1602 hardware and registers the + SLCD character driver as /dev/lcd1602. See include/nuttx/lcd/hd4478ou.h + + LCD pin mapping: + + ----------------------------------- ---------- ---------------------------------- + PIC32 LCD1602 PCBLogic PIN + PIN SIGNAL NAME PIN NAME(s) + ----------------------------------- ---------- ---------------------------------- + 1. Vss --> Powerpoint GND + 2. Vdd --> Powerpoint USB+5V + 3. Vee N/C To ground via 10K potentiometer + 4 AN15/OCFB/PMALL/PMA0/CN12/RB15 4. RS 4 PMA0, Selects registers + 82 PMRD/CN14/RD5 5. RW 82 PMRD/PMWR, Selects read or write + 81 OC5/PMWR/CN13/RD4 6. E 81 PMENB, Starts data read/write + 93 PMD0/RE0 7. D0 93 PMD0 + 94 PMD1/RE1 8. D1 94 PMD1 + 98 PMD2/RE2 9. D2 98 PMD2 + 99 PMD3/RE3 10. D3 99 PMD3 + 100 PMD4/RE4 11. D4 100 PMD4 + 3 PMD5/RE5 12. D5 3 PMD5 + 4 PMD6/RE6 13. D6 4 PMD6 + 5 PMD7/RE7 14. D7 5 PMD7 + 15. A N/C To Vcc (5V) via 10K potentiometer + 16. K --> Powerpoint GND + ----------------------------------- ---------- ---------------------------------- PIC32MX Configuration Options ============================= @@ -524,20 +554,126 @@ PIC32MX Configuration Options Configurations ============== -Each PIC32MX configuration is maintained in a sub-directory and can be -selected as follow: + Each PIC32MX configuration is maintained in a sub-directory and can be + selected as follow: cd tools ./configure.sh pcblogic-pic32mx/ cd - . ./setenv.sh -Where is one of the following: + Where is one of the following sub-directories. + + NOTE: These configurations use the mconf-based configuration tool. To + change any of these configurations using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + +Configuration sub-directories +----------------------------- ostest: This configuration directory, performs a simple OS test using apps/examples/ostest. + NOTES: + + 1. The serial console is on UART1. Therefore, you will need an external + RS232 driver or TTL serial-to-USB converter. The UART1 TX and RX + pins are available on: + + TX -- Pin 53: U1TX/RF8 + RX -- Pin 52: U1RX/RF2 + + Power for the converter is available from the power point connector: + + GND -- POWER POINT: GND + Vcc -- POWER POINT: Vdd (3.3V) -- Or P32_VBUS (+5V) + Or +5V from a USB PC port. + + The serial console is configured for 115200 8N1 by default. + + 2. By default, this configuration uses an older Microchip C32 toolchain + for Windows (the newer ones seem to be incompatible) and builds under + Cygwin (or probably MSYS). That + can easily be reconfigured, of course. + + Build Setup: + CONFIG_HOST_WINDOWS=y : Builds under Windows + CONFIG_WINDOWS_CYGWIN=y : Using Cygwin + + System Type: + CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE=y : Older C32 toolchain + nsh: This configuration directory holds configuration files tht can be used to support the NuttShell (NSH). + + NOTES: + + 1. The serial console is on UART1. Therefore, you will need an external + RS232 driver or TTL serial-to-USB converter. The UART1 TX and RX + pins are available on: + + TX -- Pin 53: U1TX/RF8 + RX -- Pin 52: U1RX/RF2 + + Power for the converter is available from the power point connector: + + GND -- POWER POINT: GND + Vcc -- POWER POINT: Vdd (3.3V) -- Or P32_VBUS (+5V) + Or +5V from a USB PC port. + + The serial console is configured for 115200 8N1 by default. + + 2. Support for NSH built-in applications is enabled. + + 3. By default, this configuration uses an older Microchip C32 toolchain + for Windows (the newer ones seem to be incompatible) and builds under + Cygwin (or probably MSYS). That + can easily be reconfigured, of course. + + Build Setup: + CONFIG_HOST_WINDOWS=y : Builds under Windows + CONFIG_WINDOWS_CYGWIN=y : Using Cygwin + + System Type: + CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE=y : Older C32 toolchain + + 4. To enable LCD1602 support: + + Device Drivers: + CONFIG_LCD=y : Enable LCD menus + CONFIG_LCD_LCD1602=y : Select LCD1602 + + Library Routines: + CONFIG_LIB_SLCDCODEC=y : Enable the SLCD CODEC + + System Type -> PIC32MX Peripheral Support: + CONFIG_PIC32MX_PMP=y : Enable PMP support + + To enable apps/examples/slcd to test the LCD: + + Application Configuration: + CONFIG_NSH_ARCHINIT=y : Needed to initialize the SLCD + CONFIG_EXAMPLES_SLCD=y : Enable apps/examples/slcd use /dev/lcd1602 + CONFIG_EXAMPLES_SLCD_DEVNAME="/dev/lcd1602" + + To enable LCD debug output: + + Device Drivers: + CONFIG_LCD=y : (Needed to enable LCD debug) + + Build Setup: + CONFIG_DEBUG=y : Enable debug features + CONFIG_DEBUG_VERBOSE=y : Enable LCD debug + + NOTE: At this point in time, testing of the SLCD is very limited because + there is not much in apps/examples/slcd. Certainly there are more bugs + to be found. There are also many segment-encoded glyphs in stm32_lcd.c + But there is a basically functional driver with a working test setup + that can be extended if you want a fully functional SLCD driver. diff --git a/configs/pcblogic-pic32mx/nsh/appconfig b/configs/pcblogic-pic32mx/nsh/appconfig deleted file mode 100644 index 9b95defa8c8..00000000000 --- a/configs/pcblogic-pic32mx/nsh/appconfig +++ /dev/null @@ -1,61 +0,0 @@ -############################################################################ -# configs/pcblogic-pic32mx/nsh/appconfig -# -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nsh - -# The NSH application library - -CONFIGURED_APPS += system/readline -CONFIGURED_APPS += nshlib - -# Applications configured as an NX built-in commands - -ifeq ($(CONFIG_NET),y) -CONFIGURED_APPS += netutils/uiplib -CONFIGURED_APPS += netutils/resolv -CONFIGURED_APPS += netutils/webclient -CONFIGURED_APPS += netutils/tftpc -endif - -ifeq ($(CONFIG_PWM),y) -CONFIGURED_APPS += examples/pwm -endif - -ifeq ($(CONFIG_CAN),y) -CONFIGURED_APPS += examples/can -endif - diff --git a/configs/pcblogic-pic32mx/nsh/defconfig b/configs/pcblogic-pic32mx/nsh/defconfig index f7f9b951def..ae59eb248aa 100644 --- a/configs/pcblogic-pic32mx/nsh/defconfig +++ b/configs/pcblogic-pic32mx/nsh/defconfig @@ -1,470 +1,731 @@ -############################################################################ -# configs/pcblogic-pic32mx/nsh/defconfig -# -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="mips" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +# CONFIG_RAW_BINARY is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +# CONFIG_ARCH_ARM is not set +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set CONFIG_ARCH_MIPS=y -CONFIG_ARCH_MIPS32=y +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="mips" +CONFIG_ARCH_FAMILY="mips32" CONFIG_ARCH_CHIP="pic32mx" +# CONFIG_SERIAL_TERMIOS is not set +CONFIG_ARCH_CHIP_PIC32MX=y +CONFIG_ARCH_MIPS32=y + +# +# MIPS32 Configuration Options +# +# CONFIG_MIPS32_TOOLCHAIN_GNU_ELF is not set +# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPL is not set +# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPL_LITE is not set +# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW is not set +CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE=y +# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPOPENL is not set +# CONFIG_MIPS32_TOOLCHAIN_PINGUINOW is not set +# CONFIG_MIPS32_TOOLCHAIN_PINGUINOL is not set +# CONFIG_MIPS32_FRAMEPOINTER is not set + +# +# PIC32MX Configuration Options +# +# CONFIG_ARCH_CHIP_PIC32MX110F016B is not set +# CONFIG_ARCH_CHIP_PIC32MX110F016C is not set +# CONFIG_ARCH_CHIP_PIC32MX110F016D is not set +# CONFIG_ARCH_CHIP_PIC32MX120F032B is not set +# CONFIG_ARCH_CHIP_PIC32MX120F032C is not set +# CONFIG_ARCH_CHIP_PIC32MX120F032D is not set +# CONFIG_ARCH_CHIP_PIC32MX130F064B is not set +# CONFIG_ARCH_CHIP_PIC32MX130F064C is not set +# CONFIG_ARCH_CHIP_PIC32MX130F064D is not set +# CONFIG_ARCH_CHIP_PIC32MX150F128B is not set +# CONFIG_ARCH_CHIP_PIC32MX150F128C is not set +# CONFIG_ARCH_CHIP_PIC32MX150F128D is not set +# CONFIG_ARCH_CHIP_PIC32MX210F016B is not set +# CONFIG_ARCH_CHIP_PIC32MX210F016C is not set +# CONFIG_ARCH_CHIP_PIC32MX210F016D is not set +# CONFIG_ARCH_CHIP_PIC32MX220F032B is not set +# CONFIG_ARCH_CHIP_PIC32MX220F032C is not set +# CONFIG_ARCH_CHIP_PIC32MX220F032D is not set +# CONFIG_ARCH_CHIP_PIC32MX230F064B is not set +# CONFIG_ARCH_CHIP_PIC32MX230F064C is not set +# CONFIG_ARCH_CHIP_PIC32MX230F064D is not set +# CONFIG_ARCH_CHIP_PIC32MX250F128B is not set +# CONFIG_ARCH_CHIP_PIC32MX250F128C is not set +# CONFIG_ARCH_CHIP_PIC32MX250F128D is not set +# CONFIG_ARCH_CHIP_PIC32MX320F032H is not set +# CONFIG_ARCH_CHIP_PIC32MX320F064H is not set +# CONFIG_ARCH_CHIP_PIC32MX320F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX320F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX340F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX340F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX340F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX340F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX360F256L is not set +# CONFIG_ARCH_CHIP_PIC32MX360F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX420F032H is not set +# CONFIG_ARCH_CHIP_PIC32MX440F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX440F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX440F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX440F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX460F256L is not set CONFIG_ARCH_CHIP_PIC32MX460F512L=y -CONFIG_ARCH_BOARD="pcblogic-pic32mx" -CONFIG_ARCH_BOARD_PCBLOGICPIC32MX=y -CONFIG_BOARD_LOOPSPERMSEC=8079 -CONFIG_DRAM_SIZE=32768 -CONFIG_DRAM_START=0xa0000000 -CONFIG_ARCH_NOINTC=n -CONFIG_ARCH_VECNOTIRQ=y -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=n -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n - -# -# Enable support for RAM-based functions -# (If selected, then modifications are needed in ld.script as well) -# -CONFIG_ARCH_RAMFUNCS=n - -# -# Identify toolchain and linker options -# -CONFIG_PIC32MX_MICROCHIPW=n -CONFIG_PIC32MX_MICROCHIPL=n -CONFIG_PIC32MX_MICROCHIPW_LITE=y -CONFIG_PIC32MX_MICROCHIPL_LITE=n - -# -# Individual subsystems can be enabled: -# - -CONFIG_PIC32MX_WDT=n -CONFIG_PIC32MX_RTCC=n -CONFIG_PIC32MX_TIMER1=n -CONFIG_PIC32MX_TIMER2=n -CONFIG_PIC32MX_TIMER3=n -CONFIG_PIC32MX_TIMER4=n -CONFIG_PIC32MX_TIMER5=n -CONFIG_PIC32MX_IC1=n -CONFIG_PIC32MX_IC2=n -CONFIG_PIC32MX_IC3=n -CONFIG_PIC32MX_IC4=n -CONFIG_PIC32MX_IC5=n -CONFIG_PIC32MX_OC1=n -CONFIG_PIC32MX_OC2=n -CONFIG_PIC32MX_OC3=n -CONFIG_PIC32MX_OC4=n -CONFIG_PIC32MX_OC5=n -CONFIG_PIC32MX_I2C1=n -CONFIG_PIC32MX_I2C2=n -CONFIG_PIC32MX_SPI1=n -CONFIG_PIC32MX_SPI2=n +# CONFIG_ARCH_CHIP_PIC32MX534F064H is not set +# CONFIG_ARCH_CHIP_PIC32MX534F064L is not set +# CONFIG_ARCH_CHIP_PIC32MX564F064H is not set +# CONFIG_ARCH_CHIP_PIC32MX564F064L is not set +# CONFIG_ARCH_CHIP_PIC32MX564F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX564F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX575F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX575F256L is not set +# CONFIG_ARCH_CHIP_PIC32MX575F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX575F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX664F064H is not set +# CONFIG_ARCH_CHIP_PIC32MX664F064L is not set +# CONFIG_ARCH_CHIP_PIC32MX664F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX664F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX675F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX675F256L is not set +# CONFIG_ARCH_CHIP_PIC32MX675F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX675F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX695F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX695F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX764F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX764F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX775F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX775F256L is not set +# CONFIG_ARCH_CHIP_PIC32MX775F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX775F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX795F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX795F512L is not set +CONFIG_ARCH_CHIP_PIC32MX4=y +# CONFIG_PIC32MX_MVEC is not set +CONFIG_PIC32MX_T1=y + +# +# PIC32MX Peripheral Support +# +# CONFIG_PIC32MX_WDT is not set +# CONFIG_PIC32MX_T2 is not set +# CONFIG_PIC32MX_T3 is not set +# CONFIG_PIC32MX_T4 is not set +# CONFIG_PIC32MX_T5 is not set +# CONFIG_PIC32MX_IC1 is not set +# CONFIG_PIC32MX_IC2 is not set +# CONFIG_PIC32MX_IC3 is not set +# CONFIG_PIC32MX_IC4 is not set +# CONFIG_PIC32MX_IC5 is not set +# CONFIG_PIC32MX_OC1 is not set +# CONFIG_PIC32MX_OC2 is not set +# CONFIG_PIC32MX_OC3 is not set +# CONFIG_PIC32MX_OC4 is not set +# CONFIG_PIC32MX_OC5 is not set +# CONFIG_PIC32MX_I2C1 is not set +# CONFIG_PIC32MX_I2C2 is not set +# CONFIG_PIC32MX_I2C3 is not set +# CONFIG_PIC32MX_I2C4 is not set +# CONFIG_PIC32MX_I2C5 is not set +# CONFIG_PIC32MX_SPI1 is not set +# CONFIG_PIC32MX_SPI2 is not set +# CONFIG_PIC32MX_SPI3 is not set +# CONFIG_PIC32MX_SPI4 is not set CONFIG_PIC32MX_UART1=y -CONFIG_PIC32MX_UART2=n -CONFIG_PIC32MX_PMP=n -CONFIG_PIC32MX_ADC=n -CONFIG_PIC32MX_CVR=n -CONFIG_PIC32MX_CM1=n -CONFIG_PIC32MX_CM2=n -CONFIG_PIC32MX_DDP=n -CONFIG_PIC32MX_FLASH=n -CONFIG_PIC32MX_BMX=n -CONFIG_PIC32MX_DMA=n -CONFIG_PIC32MX_CHE=n -CONFIG_PIC32MX_USBDEV=n -CONFIG_PIC32MX_USBHOST=n - -# -# PIC32MX Configuration Settings +# CONFIG_PIC32MX_UART2 is not set +# CONFIG_PIC32MX_UART3 is not set +# CONFIG_PIC32MX_UART4 is not set +# CONFIG_PIC32MX_UART5 is not set +# CONFIG_PIC32MX_UART6 is not set +# CONFIG_PIC32MX_ADC is not set +# CONFIG_PIC32MX_PMP is not set +# CONFIG_PIC32MX_CM1 is not set +# CONFIG_PIC32MX_CM2 is not set +# CONFIG_PIC32MX_CM3 is not set +# CONFIG_PIC32MX_RTCC is not set +# CONFIG_PIC32MX_DMA is not set +# CONFIG_PIC32MX_FLASH is not set +# CONFIG_PIC32MX_USBDEV is not set +# CONFIG_PIC32MX_USBHOST is not set +# CONFIG_PIC32MX_CAN1 is not set +# CONFIG_PIC32MX_CAN2 is not set +# CONFIG_PIC32MX_ETHERNET is not set +# CONFIG_PIC32MX_CTMU is not set + +# +# PIC32MX Peripheral Interrupt Priorities +# +CONFIG_PIC32MX_CTPRIO=16 +CONFIG_PIC32MX_CS0PRIO=16 +CONFIG_PIC32MX_CS1PRIO=16 +CONFIG_PIC32MX_INT0PRIO=16 +CONFIG_PIC32MX_INT1PRIO=16 +CONFIG_PIC32MX_INT2PRIO=16 +CONFIG_PIC32MX_INT3PRIO=16 +CONFIG_PIC32MX_INT4PRIO=16 +CONFIG_PIC32MX_T1PRIO=16 +CONFIG_PIC32MX_UART1PRIO=16 + +# +# Device Configuration 0 (DEVCFG0) # CONFIG_PIC32MX_DEBUGGER=2 CONFIG_PIC32MX_ICESEL=1 +CONFIG_PIC32MX_PROGFLASHWP=0xff +CONFIG_PIC32MX_BOOTFLASHWP=1 +CONFIG_PIC32MX_CODEWP=1 # -# PIC32MX specific serial device driver settings +# Device Configuration 3 (DEVCFG3) # -CONFIG_UART1_SERIAL_CONSOLE=y -CONFIG_UART2_SERIAL_CONSOLE=n +CONFIG_PIC32MX_USBIDO=0 +CONFIG_PIC32MX_VBUSIO=0 +# CONFIG_PIC32MX_WDENABLE is not set +CONFIG_PIC32MX_FETHIO=1 +CONFIG_PIC32MX_FMIIEN=1 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 +# +# External Memory Configuration +# -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +CONFIG_ARCH_VECNOTIRQ=y +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +# CONFIG_ARCH_RAMFUNCS is not set +# CONFIG_ARCH_HAVE_RAMVECTORS is not set -CONFIG_UART1_BAUD=115200 -CONFIG_UART2_BAUD=115200 +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=8079 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0xa0000000 +CONFIG_DRAM_SIZE=32768 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 +# +# Board Selection +# +CONFIG_ARCH_BOARD_PCBLOGICPIC32MX=y +# CONFIG_ARCH_BOARD_UBW32 is not set +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="pcblogic-pic32mx" -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 +# +# Common Board Options +# +CONFIG_NSH_MMCSDMINOR=0 # -# General build options +# Board-Specific Options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n # -# General OS setup +# RTOS Features # -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_SCHED=n -CONFIG_HAVE_CXX=n -CONFIG_HAVE_CXXINITIALIZE=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=0 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2011 CONFIG_START_MONTH=12 CONFIG_START_DAY=25 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 CONFIG_SCHED_WAITPID=y -CONFIG_SCHED_ATEXIT=n +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set # -# Settings for nxflat +# Signal Numbers # -CONFIG_NXFLAT=n -CONFIG_NXFLAT_DUMPBUFFER=n -CONFIG_SYMTAB_ORDEREDBYNAME=y +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 # -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. +# Sizes of configurable things (0 disables) # -# There are certain dependency relationships in these -# features. +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=4 + # -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=2048 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers # -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART1=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART1_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set # -# Misc libc settings +# UART1 Configuration # -CONFIG_NOPRINTF_FIELDWIDTH=n +CONFIG_UART1_RXBUFSIZE=256 +CONFIG_UART1_TXBUFSIZE=256 +CONFIG_UART1_BAUD=115200 +CONFIG_UART1_BITS=8 +CONFIG_UART1_PARITY=0 +CONFIG_UART1_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set # -# Allow for architecture optimized implementations +# System Logging Device Options +# + # -# The architecture can provide optimized versions of the -# following to improve system performance +# System Logging # -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +# CONFIG_RAMLOG is not set # -# Sizes of configurable things (0 disables) +# Networking Support # -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set # -# Filesystem configuration +# Graphics Support # -CONFIG_FS_FAT=n -CONFIG_FS_FAT=y -CONFIG_FAT_LCNAMES=y -CONFIG_FAT_LFN=y -CONFIG_FAT_MAXFNAME=32 -CONFIG_FS_NXFFS=n -CONFIG_FS_ROMFS=n +# CONFIG_NX is not set # -# Maintain legacy build behavior (revisit) +# Memory Management # +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_GRAN is not set -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MTD=y +# +# Audio Support +# +# CONFIG_AUDIO is not set # -# SPI-based MMC/SD driver +# Binary Formats # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set # -# Block driver buffering +# Library Routines # -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n # -# SDIO-based MMC/SD driver +# Standard C Library Options # -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set # -# TCP/IP and UDP support via uIP +# Non-standard Library Support # -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set # -# UIP Network Utilities +# Basic CXX Support # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set # -# USB Device Configuration +# Application Configuration # -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 # -# USB Serial Device Configuration +# Built-In Applications # -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=5 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 # -# USB Storage Device Configuration +# Examples # -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=1 -CONFIG_USBMSC_EPBULKIN=2 -CONFIG_USBMSC_NRDREQS=8 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=64 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set # -# Settings for examples/uip +# Graphics Support # -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n +# CONFIG_TIFF is not set # -# Settings for examples/nettest +# Interpreters # -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=y -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # -# Settings for examples/ostest +# Network Utilities # -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 # -# Settings for apps/nshlib +# Networking Utilities # -CONFIG_BUILTIN=y +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n CONFIG_NSH_LINELEN=64 CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=1 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 # -# Settings for examples/usbserial +# USB Trace Support +# +# CONFIG_NSH_CONDEV is not set +# CONFIG_NSH_ARCHINIT is not set + +# +# NxWidgets/NxWM # -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n +# +# System NSH Add-Ons +# # -# Settings for examples/usbstorage +# Custom Free Memory Command # -CONFIG_EXAMPLES_USBMSC_NLUNS=1 -CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0 -CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0" -CONFIG_EXAMPLES_USBMSC_TRACEINIT=n -CONFIG_EXAMPLES_USBMSC_TRACECLASS=n -CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n +# CONFIG_SYSTEM_FREE is not set # -# Stack and heap information +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=2048 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 diff --git a/configs/pcblogic-pic32mx/ostest/appconfig b/configs/pcblogic-pic32mx/ostest/appconfig deleted file mode 100644 index fc81262497d..00000000000 --- a/configs/pcblogic-pic32mx/ostest/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/pcblogic-pic32mx/ostest/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/ostest - diff --git a/configs/pcblogic-pic32mx/ostest/defconfig b/configs/pcblogic-pic32mx/ostest/defconfig index 61976be335d..5db13120593 100644 --- a/configs/pcblogic-pic32mx/ostest/defconfig +++ b/configs/pcblogic-pic32mx/ostest/defconfig @@ -1,238 +1,334 @@ -############################################################################ -# configs/pcblogic-pic32mx/ostest/defconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="mips" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +# CONFIG_RAW_BINARY is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +# CONFIG_ARCH_ARM is not set +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set CONFIG_ARCH_MIPS=y -CONFIG_ARCH_MIPS32=y +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="mips" +CONFIG_ARCH_FAMILY="mips32" CONFIG_ARCH_CHIP="pic32mx" +# CONFIG_SERIAL_TERMIOS is not set +CONFIG_ARCH_CHIP_PIC32MX=y +CONFIG_ARCH_MIPS32=y + +# +# MIPS32 Configuration Options +# +# CONFIG_MIPS32_TOOLCHAIN_GNU_ELF is not set +# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPL is not set +# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPL_LITE is not set +# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW is not set +CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE=y +# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPOPENL is not set +# CONFIG_MIPS32_TOOLCHAIN_PINGUINOW is not set +# CONFIG_MIPS32_TOOLCHAIN_PINGUINOL is not set +# CONFIG_MIPS32_FRAMEPOINTER is not set + +# +# PIC32MX Configuration Options +# +# CONFIG_ARCH_CHIP_PIC32MX110F016B is not set +# CONFIG_ARCH_CHIP_PIC32MX110F016C is not set +# CONFIG_ARCH_CHIP_PIC32MX110F016D is not set +# CONFIG_ARCH_CHIP_PIC32MX120F032B is not set +# CONFIG_ARCH_CHIP_PIC32MX120F032C is not set +# CONFIG_ARCH_CHIP_PIC32MX120F032D is not set +# CONFIG_ARCH_CHIP_PIC32MX130F064B is not set +# CONFIG_ARCH_CHIP_PIC32MX130F064C is not set +# CONFIG_ARCH_CHIP_PIC32MX130F064D is not set +# CONFIG_ARCH_CHIP_PIC32MX150F128B is not set +# CONFIG_ARCH_CHIP_PIC32MX150F128C is not set +# CONFIG_ARCH_CHIP_PIC32MX150F128D is not set +# CONFIG_ARCH_CHIP_PIC32MX210F016B is not set +# CONFIG_ARCH_CHIP_PIC32MX210F016C is not set +# CONFIG_ARCH_CHIP_PIC32MX210F016D is not set +# CONFIG_ARCH_CHIP_PIC32MX220F032B is not set +# CONFIG_ARCH_CHIP_PIC32MX220F032C is not set +# CONFIG_ARCH_CHIP_PIC32MX220F032D is not set +# CONFIG_ARCH_CHIP_PIC32MX230F064B is not set +# CONFIG_ARCH_CHIP_PIC32MX230F064C is not set +# CONFIG_ARCH_CHIP_PIC32MX230F064D is not set +# CONFIG_ARCH_CHIP_PIC32MX250F128B is not set +# CONFIG_ARCH_CHIP_PIC32MX250F128C is not set +# CONFIG_ARCH_CHIP_PIC32MX250F128D is not set +# CONFIG_ARCH_CHIP_PIC32MX320F032H is not set +# CONFIG_ARCH_CHIP_PIC32MX320F064H is not set +# CONFIG_ARCH_CHIP_PIC32MX320F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX320F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX340F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX340F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX340F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX340F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX360F256L is not set +# CONFIG_ARCH_CHIP_PIC32MX360F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX420F032H is not set +# CONFIG_ARCH_CHIP_PIC32MX440F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX440F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX440F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX440F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX460F256L is not set CONFIG_ARCH_CHIP_PIC32MX460F512L=y -CONFIG_ARCH_BOARD="pcblogic-pic32mx" -CONFIG_ARCH_BOARD_PCBLOGICPIC32MX=y -CONFIG_BOARD_LOOPSPERMSEC=8079 -CONFIG_DRAM_SIZE=32768 -CONFIG_DRAM_START=0xa0000000 -CONFIG_ARCH_NOINTC=n -CONFIG_ARCH_VECNOTIRQ=y -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=n -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n - -# -# Enable support for RAM-based functions -# (If selected, then modifications are needed in ld.script as well) -# -CONFIG_ARCH_RAMFUNCS=n - -# -# Identify toolchain and linker options -# -CONFIG_PIC32MX_MICROCHIPW=n -CONFIG_PIC32MX_MICROCHIPL=n -CONFIG_PIC32MX_MICROCHIPW_LITE=y -CONFIG_PIC32MX_MICROCHIPL_LITE=n - -# -# Individual subsystems can be enabled: -# - -CONFIG_PIC32MX_WDT=n -CONFIG_PIC32MX_RTCC=n -CONFIG_PIC32MX_TIMER1=n -CONFIG_PIC32MX_TIMER2=n -CONFIG_PIC32MX_TIMER3=n -CONFIG_PIC32MX_TIMER4=n -CONFIG_PIC32MX_TIMER5=n -CONFIG_PIC32MX_IC1=n -CONFIG_PIC32MX_IC2=n -CONFIG_PIC32MX_IC3=n -CONFIG_PIC32MX_IC4=n -CONFIG_PIC32MX_IC5=n -CONFIG_PIC32MX_OC1=n -CONFIG_PIC32MX_OC2=n -CONFIG_PIC32MX_OC3=n -CONFIG_PIC32MX_OC4=n -CONFIG_PIC32MX_OC5=n -CONFIG_PIC32MX_I2C1=n -CONFIG_PIC32MX_I2C2=n -CONFIG_PIC32MX_SPI1=n -CONFIG_PIC32MX_SPI2=n +# CONFIG_ARCH_CHIP_PIC32MX534F064H is not set +# CONFIG_ARCH_CHIP_PIC32MX534F064L is not set +# CONFIG_ARCH_CHIP_PIC32MX564F064H is not set +# CONFIG_ARCH_CHIP_PIC32MX564F064L is not set +# CONFIG_ARCH_CHIP_PIC32MX564F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX564F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX575F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX575F256L is not set +# CONFIG_ARCH_CHIP_PIC32MX575F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX575F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX664F064H is not set +# CONFIG_ARCH_CHIP_PIC32MX664F064L is not set +# CONFIG_ARCH_CHIP_PIC32MX664F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX664F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX675F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX675F256L is not set +# CONFIG_ARCH_CHIP_PIC32MX675F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX675F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX695F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX695F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX764F128H is not set +# CONFIG_ARCH_CHIP_PIC32MX764F128L is not set +# CONFIG_ARCH_CHIP_PIC32MX775F256H is not set +# CONFIG_ARCH_CHIP_PIC32MX775F256L is not set +# CONFIG_ARCH_CHIP_PIC32MX775F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX775F512L is not set +# CONFIG_ARCH_CHIP_PIC32MX795F512H is not set +# CONFIG_ARCH_CHIP_PIC32MX795F512L is not set +CONFIG_ARCH_CHIP_PIC32MX4=y +# CONFIG_PIC32MX_MVEC is not set +CONFIG_PIC32MX_T1=y + +# +# PIC32MX Peripheral Support +# +# CONFIG_PIC32MX_WDT is not set +# CONFIG_PIC32MX_T2 is not set +# CONFIG_PIC32MX_T3 is not set +# CONFIG_PIC32MX_T4 is not set +# CONFIG_PIC32MX_T5 is not set +# CONFIG_PIC32MX_IC1 is not set +# CONFIG_PIC32MX_IC2 is not set +# CONFIG_PIC32MX_IC3 is not set +# CONFIG_PIC32MX_IC4 is not set +# CONFIG_PIC32MX_IC5 is not set +# CONFIG_PIC32MX_OC1 is not set +# CONFIG_PIC32MX_OC2 is not set +# CONFIG_PIC32MX_OC3 is not set +# CONFIG_PIC32MX_OC4 is not set +# CONFIG_PIC32MX_OC5 is not set +# CONFIG_PIC32MX_I2C1 is not set +# CONFIG_PIC32MX_I2C2 is not set +# CONFIG_PIC32MX_I2C3 is not set +# CONFIG_PIC32MX_I2C4 is not set +# CONFIG_PIC32MX_I2C5 is not set +# CONFIG_PIC32MX_SPI1 is not set +# CONFIG_PIC32MX_SPI2 is not set +# CONFIG_PIC32MX_SPI3 is not set +# CONFIG_PIC32MX_SPI4 is not set CONFIG_PIC32MX_UART1=y -CONFIG_PIC32MX_UART2=n -CONFIG_PIC32MX_PMP=n -CONFIG_PIC32MX_ADC=n -CONFIG_PIC32MX_CVR=n -CONFIG_PIC32MX_CM1=n -CONFIG_PIC32MX_CM2=n -CONFIG_PIC32MX_DDP=n -CONFIG_PIC32MX_FLASH=n -CONFIG_PIC32MX_BMX=n -CONFIG_PIC32MX_DMA=n -CONFIG_PIC32MX_CHE=n -CONFIG_PIC32MX_USBDEV=n -CONFIG_PIC32MX_USBHOST=n - -# -# PIC32MX Configuration Settings +# CONFIG_PIC32MX_UART2 is not set +# CONFIG_PIC32MX_UART3 is not set +# CONFIG_PIC32MX_UART4 is not set +# CONFIG_PIC32MX_UART5 is not set +# CONFIG_PIC32MX_UART6 is not set +# CONFIG_PIC32MX_ADC is not set +# CONFIG_PIC32MX_PMP is not set +# CONFIG_PIC32MX_CM1 is not set +# CONFIG_PIC32MX_CM2 is not set +# CONFIG_PIC32MX_CM3 is not set +# CONFIG_PIC32MX_RTCC is not set +# CONFIG_PIC32MX_DMA is not set +# CONFIG_PIC32MX_FLASH is not set +# CONFIG_PIC32MX_USBDEV is not set +# CONFIG_PIC32MX_USBHOST is not set +# CONFIG_PIC32MX_CAN1 is not set +# CONFIG_PIC32MX_CAN2 is not set +# CONFIG_PIC32MX_ETHERNET is not set +# CONFIG_PIC32MX_CTMU is not set + +# +# PIC32MX Peripheral Interrupt Priorities +# +CONFIG_PIC32MX_CTPRIO=16 +CONFIG_PIC32MX_CS0PRIO=16 +CONFIG_PIC32MX_CS1PRIO=16 +CONFIG_PIC32MX_INT0PRIO=16 +CONFIG_PIC32MX_INT1PRIO=16 +CONFIG_PIC32MX_INT2PRIO=16 +CONFIG_PIC32MX_INT3PRIO=16 +CONFIG_PIC32MX_INT4PRIO=16 +CONFIG_PIC32MX_T1PRIO=16 +CONFIG_PIC32MX_UART1PRIO=16 + +# +# Device Configuration 0 (DEVCFG0) # CONFIG_PIC32MX_DEBUGGER=2 CONFIG_PIC32MX_ICESEL=1 +CONFIG_PIC32MX_PROGFLASHWP=0xff +CONFIG_PIC32MX_BOOTFLASHWP=1 +CONFIG_PIC32MX_CODEWP=1 # -# PIC32MX specific serial device driver settings +# Device Configuration 3 (DEVCFG3) # -CONFIG_UART1_SERIAL_CONSOLE=y -CONFIG_UART2_SERIAL_CONSOLE=n +CONFIG_PIC32MX_USBIDO=0 +CONFIG_PIC32MX_VBUSIO=0 +# CONFIG_PIC32MX_WDENABLE is not set +CONFIG_PIC32MX_FETHIO=1 +CONFIG_PIC32MX_FMIIEN=1 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 +# +# External Memory Configuration +# -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +CONFIG_ARCH_VECNOTIRQ=y +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +# CONFIG_ARCH_RAMFUNCS is not set +# CONFIG_ARCH_HAVE_RAMVECTORS is not set -CONFIG_UART1_BAUD=115200 -CONFIG_UART2_BAUD=115200 +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=8079 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0xa0000000 +CONFIG_DRAM_SIZE=32768 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 +# +# Board Selection +# +CONFIG_ARCH_BOARD_PCBLOGICPIC32MX=y +# CONFIG_ARCH_BOARD_UBW32 is not set +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="pcblogic-pic32mx" -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 +# +# Common Board Options +# # -# General build options +# Board-Specific Options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n # -# General OS setup +# RTOS Features # -CONFIG_USER_ENTRYPOINT="ostest_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_SCHED=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=0 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2011 CONFIG_START_MONTH=4 CONFIG_START_DAY=8 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 - -# -# Settings for nxflat -# -CONFIG_NXFLAT=n -CONFIG_NXFLAT_DUMPBUFFER=n -CONFIG_SYMTAB_ORDEREDBYNAME=y - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="ostest_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y # -# Misc libc settings +# Signal Numbers # -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 # # Sizes of configurable things (0 disables) @@ -243,8 +339,6 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 @@ -252,207 +346,319 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # -# Filesystem configuration +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=2048 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +CONFIG_DEV_LOWCONSOLE=y +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART1=y +CONFIG_MCU_SERIAL=y +CONFIG_UART1_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART1 Configuration +# +CONFIG_UART1_RXBUFSIZE=256 +CONFIG_UART1_TXBUFSIZE=256 +CONFIG_UART1_BAUD=115200 +CONFIG_UART1_BITS=8 +CONFIG_UART1_PARITY=0 +CONFIG_UART1_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options # -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n # -# Maintain legacy build behavior (revisit) +# System Logging # +# CONFIG_RAMLOG is not set -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MTD=y +# +# Networking Support +# +# CONFIG_NET is not set # -# SPI-based MMC/SD driver +# File Systems # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 # -# Block driver buffering +# File system configuration # -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n +CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_FS_RAMMAP is not set # -# SDIO-based MMC/SD driver +# System Logging # -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set # -# TCP/IP and UDP support via uIP +# Graphics Support # -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +# CONFIG_NX is not set # -# UIP Network Utilities +# Memory Management # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_GRAN is not set # -# USB Device Configuration +# Audio Support # -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 +# CONFIG_AUDIO is not set # -# USB Serial Device Configuration +# Binary Formats # -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=5 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set # -# USB Storage Device Configuration +# Library Routines # -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=1 -CONFIG_USBMSC_EPBULKIN=2 -CONFIG_USBMSC_NRDREQS=8 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=64 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y # -# Settings for examples/uip +# Standard C Library Options # -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set # -# Settings for examples/nettest +# Non-standard Library Support # -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=y -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set # -# Settings for examples/ostest +# Basic CXX Support # +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +CONFIG_EXAMPLES_OSTEST=y +# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set CONFIG_EXAMPLES_OSTEST_LOOPS=1 CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 +CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000 +CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set # -# Settings for apps/nshlib +# Graphics Support # -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" +# CONFIG_TIFF is not set # -# Architecture-specific NSH options +# Interpreters # -CONFIG_NSH_MMCSDSPIPORTNO=1 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # -# Settings for examples/usbserial +# Network Utilities # -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set # -# Settings for examples/usbstorage +# FreeModBus # -CONFIG_EXAMPLES_USBMSC_NLUNS=1 -CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0 -CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0" -CONFIG_EXAMPLES_USBMSC_TRACEINIT=n -CONFIG_EXAMPLES_USBMSC_TRACECLASS=n -CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n +# CONFIG_MODBUS is not set # -# Stack and heap information +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=2048 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 diff --git a/configs/pcblogic-pic32mx/src/Makefile b/configs/pcblogic-pic32mx/src/Makefile index c02fc3d4fb6..bef17a3bf08 100644 --- a/configs/pcblogic-pic32mx/src/Makefile +++ b/configs/pcblogic-pic32mx/src/Makefile @@ -1,7 +1,7 @@ ############################################################################ # configs/pcblogic-pic32mx/src/Makefile # -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2013 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -35,28 +35,32 @@ -include $(TOPDIR)/Make.defs -CFLAGS += -I$(TOPDIR)/sched +CFLAGS += -I$(TOPDIR)/sched -ASRCS = -CSRCS = up_boot.c +ASRCS = +CSRCS = pic32mx_boot.c -ifeq ($(CONFIG_ARCH_LEDS),y) -CSRCS += up_leds.c +ifeq ($(CONFIG_NSH_ARCHINIT),y) +CSRCS += pic32mx_nsh.c endif -AOBJS = $(ASRCS:.S=$(OBJEXT)) -COBJS = $(CSRCS:.c=$(OBJEXT)) +ifeq ($(CONFIG_LCD_LCD1602),y) +CSRCS += pic32mx_lcd1602.c +endif + +AOBJS = $(ASRCS:.S=$(OBJEXT)) +COBJS = $(CSRCS:.c=$(OBJEXT)) -SRCS = $(ASRCS) $(CSRCS) -OBJS = $(AOBJS) $(COBJS) +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) -ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src ifeq ($(WINTOOL),y) - CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ - -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ - -I "${shell cygpath -w $(ARCH_SRCDIR)/mips32}" + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/mips32}" else - CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/mips32 + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/mips32 endif all: libboard$(LIBEXT) diff --git a/configs/pcblogic-pic32mx/src/pcblogic-internal.h b/configs/pcblogic-pic32mx/src/pcblogic-pic32mx.h similarity index 93% rename from configs/pcblogic-pic32mx/src/pcblogic-internal.h rename to configs/pcblogic-pic32mx/src/pcblogic-pic32mx.h index 2e0963e269e..cbf2eabc154 100644 --- a/configs/pcblogic-pic32mx/src/pcblogic-internal.h +++ b/configs/pcblogic-pic32mx/src/pcblogic-pic32mx.h @@ -1,7 +1,7 @@ /**************************************************************************** * configs/pcblogic-pic32mx/src/pcblogic-internal.h * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without @@ -33,8 +33,8 @@ * ****************************************************************************/ -#ifndef __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_INTERNAL_H -#define __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_INTERNAL_H +#ifndef __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_PIC32MX_H +#define __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_PIC32MX_H /**************************************************************************** * Included Files @@ -98,4 +98,4 @@ EXTERN void pic32mx_ledinit(void); #endif #endif /* __ASSEMBLY__ */ -#endif /* __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_INTERNAL_H */ +#endif /* __CONFIGS_PCBLOGIC_PIC32MX_SRC_PCBLOGIC_PIC32MX_H */ diff --git a/configs/pcblogic-pic32mx/src/up_boot.c b/configs/pcblogic-pic32mx/src/pic32mx_boot.c similarity index 97% rename from configs/pcblogic-pic32mx/src/up_boot.c rename to configs/pcblogic-pic32mx/src/pic32mx_boot.c index 2c9634fc06f..024122fccb8 100644 --- a/configs/pcblogic-pic32mx/src/up_boot.c +++ b/configs/pcblogic-pic32mx/src/pic32mx_boot.c @@ -1,6 +1,5 @@ /************************************************************************************ - * configs/pcblogic-pic32mx/src/up_boot.c - * arch/mips/src/board/up_boot.c + * configs/pcblogic-pic32mx/src/pic32mx_boot.c * * Copyright (C) 2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt @@ -48,7 +47,7 @@ #include "up_internal.h" #include "pic32mx-internal.h" -#include "pcblogic-internal.h" +#include "pcblogic-pic32mx.h" /************************************************************************************ * Definitions diff --git a/configs/pcblogic-pic32mx/src/up_lcd1602.c b/configs/pcblogic-pic32mx/src/pic32mx_lcd1602.c similarity index 95% rename from configs/pcblogic-pic32mx/src/up_lcd1602.c rename to configs/pcblogic-pic32mx/src/pic32mx_lcd1602.c index b8af46ee723..411ced32e6b 100644 --- a/configs/pcblogic-pic32mx/src/up_lcd1602.c +++ b/configs/pcblogic-pic32mx/src/pic32mx_lcd1602.c @@ -1,8 +1,8 @@ /**************************************************************************** - * configs/pcblocic-pic32mx/src/up_lcd1602.c + * configs/pcblocic-pic32mx/src/pic32mx_lcd1602.c * - * This logic supports the connection of an LCD1602 LCD to the - * STM32F4Discovery board. The LCD1602 is based on the Hitachi HD44780U LCD + * This logic supports the connection of an LCD1602 LCD to the PCB Logic + * PIC32MX board. The LCD1602 is based on the Hitachi HD44780U LCD * controller * * Copyright (C) 2013 Gregory Nutt. All rights reserved. @@ -76,6 +76,7 @@ #include #include +#include #include #include @@ -83,7 +84,7 @@ #include "pic32mx-pmp.h" #include "pic32mx-int.h" #include "pic32mx-internal.h" -#include "pcblogic-internal.h" +#include "pcblogic-pic32mx.h" #ifdef CONFIG_LCD_LCD1602 @@ -129,7 +130,7 @@ * Private Type Definition ****************************************************************************/ -struct lpc1620_s +struct lcd1602_2 { bool initialized; /* True: Completed initialization sequence */ }; @@ -149,9 +150,9 @@ static int lcd_poll(FAR struct file *filp, FAR struct pollfd *fds, * Private Data ****************************************************************************/ -/* This is the driver state structure (there is no retained state information) */ +/* Character driver operations */ -static const struct file_operations g_lcd1602 = +static const struct file_operations g_lcdops = { 0, /* open */ 0, /* close */ @@ -164,6 +165,10 @@ static const struct file_operations g_lcd1602 = #endif }; +/* This is the driver state structure */ + +static struct lcd1602_2 g_lcd1602; + /**************************************************************************** * Private Functions ****************************************************************************/ @@ -288,7 +293,8 @@ static int lcd_poll(FAR struct file *filp, FAR struct pollfd *fds, * Name: up_lcd1602_initialize * * Description: - * Initialize the LCD1602 hardware and register the character driver. + * Initialize the LCD1602 hardware and register the character driver as + * /dev/lcd1602. Prototype is in include/nuttx/lcd/hd4478ou.h. * ****************************************************************************/ @@ -364,7 +370,7 @@ int up_lcd1602_initialize(void) /* Register the LCD device driver */ - ret = register_driver("/dev/lcd1602", &g_lcd1602, 0644, &g_lcd1602); + ret = register_driver("/dev/lcd1602", &g_lcdops, 0644, &g_lcd1602); g_lcd1602.initialized = true; } diff --git a/configs/pcblogic-pic32mx/src/pic32mx_nsh.c b/configs/pcblogic-pic32mx/src/pic32mx_nsh.c new file mode 100644 index 00000000000..8154125f8f3 --- /dev/null +++ b/configs/pcblogic-pic32mx/src/pic32mx_nsh.c @@ -0,0 +1,98 @@ +/**************************************************************************** + * config/pcblocic-pic32mx/src/pic32mx_nsh.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include + +#include +#include + +#include "pcblogic-pic32mx.h" + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/* Configuration ************************************************************/ + +#ifndef OK +# define OK 0 +#endif + +/* Debug ********************************************************************/ + +#ifdef CONFIG_CPP_HAVE_VARARGS +# ifdef CONFIG_DEBUG +# define message(...) lowsyslog(__VA_ARGS__) +# else +# define message(...) printf(__VA_ARGS__) +# endif +#else +# ifdef CONFIG_DEBUG +# define message lowsyslog +# else +# define message printf +# endif +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: nsh_archinitialize + * + * Description: + * Perform architecture specific initialization + * + ****************************************************************************/ + +int nsh_archinitialize(void) +{ + int ret = OK; + + /* Initialize the LCD1602 and register the device as /dev/lcd1602 */ + +#ifdef CONFIG_LCD_LCD1602 + ret = up_lcd1602_initialize(); +#endif + + return ret; +} diff --git a/configs/stm32ldiscovery/README.txt b/configs/stm32ldiscovery/README.txt index a25a87ca2ff..e1f7b35fedb 100644 --- a/configs/stm32ldiscovery/README.txt +++ b/configs/stm32ldiscovery/README.txt @@ -745,7 +745,19 @@ Configurations configure.bat STM32L-Discovery\ - Where is one of the following: + Where is one of the following sub-directories. + + NOTE: These configurations use the mconf-based configuration tool. To + change any of these configurations using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + +Configuration sub-directories +----------------------------- nsh: --- @@ -753,25 +765,16 @@ Configurations NOTES: - 1. This configuration uses the mconf-based configuration tool. To - change this configuration using that tool, you should: - - a. Build and install the kconfig-mconf tool. See nuttx/README.txt - and misc/tools/ - - b. Execute 'make menuconfig' in nuttx/ in order to start the - reconfiguration process. - - 2. The serial console is on UART1 and NuttX LED support is enabled. + 1. The serial console is on UART1 and NuttX LED support is enabled. Therefore, you will need an external RS232 driver or TTL serial-to- USB converter. The UART1 TX and RX pins should be available on PA9 and PA10, respectively. The serial console is configured for 57600 8N1 by default. - 3. Support for NSH built-in applications is *not* enabled. + 2. Support for NSH built-in applications is *not* enabled. - 4. By default, this configuration uses the CodeSourcery toolchain + 3. By default, this configuration uses the CodeSourcery toolchain for Windows and builds under Cygwin (or probably MSYS). That can easily be reconfigured, of course. @@ -782,7 +785,7 @@ Configurations System Type: CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows - 5. To enable SLCD support: + 4. To enable SLCD support: Board Selection: CONFIG_ARCH_LEDS=y : Disable LED support diff --git a/drivers/lcd/Kconfig b/drivers/lcd/Kconfig index 16fc8bb8e3c..29a79a068d9 100644 --- a/drivers/lcd/Kconfig +++ b/drivers/lcd/Kconfig @@ -3,6 +3,8 @@ # see misc/tools/kconfig-language.txt. # +comment "Common LCD Settings" + config LCD_NOGETRUN bool "Write-only LCD" default n @@ -36,6 +38,8 @@ config LCD_MAXPOWER meaning to the driver. Board-specific logic may place restrictions on this value. +comment "Graphic LCD Devices" + config LCD_P14201 bool "Rit P1402 series display" default n @@ -89,7 +93,9 @@ config LCD_NOKIA6100 nokia6100.c. Supports the Nokia 6100 display with either the Philips PCF883 or the Epson S1D15G10 display controller. This LCD is used with the Olimex LPC1766-STK (but has not been fully integrated). + if LCD_NOKIA6100 + config NOKIA6100_NINTERFACES int "Number of physical NOKIA6100 devices" default 1 @@ -101,6 +107,7 @@ config NOKIA6100_NINTERFACES choice NOKIA6100_CONTROLLER prompt "Controller Setup" default NOKIA6100_S1D15G10 + config NOKIA6100_S1D15G10 bool "S1D15G10 controller" ---help--- @@ -110,6 +117,7 @@ config NOKIA6100_PCF8833 bool "PCF8833 controller" ---help--- Selects the Phillips PCF8833 display controller + endchoice config NOKIA6100_SPIMODE @@ -392,3 +400,16 @@ config LCD_RLANDSCAPE tall (LCD_LANDSCAPE is the other). endchoice + +comment "Alphanumeric/Segment LCD Devices" + +config LCD_LCD1602 + bool "LCD 1602" + default n + ---help--- + Enable support for LCD1602 devices. LCD1602 is based on the Hitachi + HD44780U LCD controller. See also include/nuttx/lcd/hd4478ou.h. + + NOTE: There is no common implementation of the LCD1602 driver. + Rather, there are board-by-board implementations. See, for example, + configs/pcblogic-pic32mx/src/up_lcd1602.c. diff --git a/drivers/lcd/README.txt b/drivers/lcd/README.txt index b5d3c931043..ef19da15db2 100644 --- a/drivers/lcd/README.txt +++ b/drivers/lcd/README.txt @@ -110,7 +110,11 @@ Re-usable LCD drivers reside in the drivers/lcd directory: st7567.c. LCD Display Module, ST7567, Univision Technology Inc. Used with the LPCXpresso and Embedded Artists base board. - ug-9664hswag01.c. OLED Display Module, UG-9664HSWAG01", Univision + ug-2864ambag01.c. OLED Display Module, UUG-2864AMBAG01, Univision + Technology Inc. See configs/stm32f4discovery and configs/zp214xp + for example usage. + + ug-9664hswag01.c. OLED Display Module, UG-9664HSWAG01, Univision Technology Inc. Used with the LPC Xpresso and Embedded Artists base board. @@ -184,10 +188,20 @@ that makes then less re-usable: configs/stm32f4discovery/src/up_ug2864hsweg01.c configs/zp214xpa/src/up_ug2864ambag01.c - Alphnumeric LCD Displays: + LCD controllers built-into the MCU: + + arch/arm/src/lpc17xx/lpc17_lcd.c and configs/open1788/src/lpc17_lcd.c. + RGB LCD display panel. + configs/stm32ldiscovery/src/stm32_lcd.c. 1x6 segment LCD with bars + using the segment LCD controller built-into the STM32L15X. + + Alphnumeric/segment LCD Displays: configs/skp16c26/src/up_lcd.c. Untested alphanumeric LCD driver. - configs/pcblogic-pic32/src/up_lcd1602.c + configs/pcblogic-pic32mx/src/up_lcd1602.c. LCD1602 is based on the + Hitachi HD44780U LCD controller. See also include/nuttx/lcd/hd4478ou.h. + configs/stm32ldiscovery/src/stm32_lcd.c. 1x6 segment LCD with bars + using the segment LCD controller built-into the STM32L15X. graphics/ ========= diff --git a/include/nuttx/lcd/hd4478ou.h b/include/nuttx/lcd/hd4478ou.h index 4bb93fca926..dc92e9fb941 100644 --- a/include/nuttx/lcd/hd4478ou.h +++ b/include/nuttx/lcd/hd4478ou.h @@ -104,9 +104,12 @@ extern "C" * Name: up_lcd1602_initialize * * Description: - * the LCD1602 is an HD4478OU-based LCD from Wave share. This function initializes the + * The LCD1602 is an HD4478OU-based LCD from Wave share. This function initializes the * LCD1602 hardware and registers the character driver as /dev/lcd1602. * + * NOTE: This common interface definition is provided, however, the underlying + * implemenataton is always board-specific for this LCD. + * ********************************************************************************************/ int up_lcd1602_initialize(void);