analyzeA.test

# 2013 August 3
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# This file contains automated tests used to verify that the current build
# (which must be either ENABLE_STAT3 or ENABLE_STAT4) works with both stat3
# and stat4 data.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
set testprefix analyzeA

ifcapable !stat4&&!stat3 {
  finish_test
  return
}

# Populate the stat3 table according to the current contents of the db
#
proc populate_stat3 {{bDropTable 1}} {
  # Open a second connection on database "test.db" and run ANALYZE. If this
  # is an ENABLE_STAT3 build, this is all that is required to create and
  # populate the sqlite_stat3 table. 
  # 
  sqlite3 db2 test.db
  execsql { ANALYZE }

  # Now, if this is an ENABLE_STAT4 build, create and populate the 
  # sqlite_stat3 table based on the stat4 data gathered by the ANALYZE
  # above. Then drop the sqlite_stat4 table.
  #
  ifcapable stat4 {
    db2 func lindex lindex
    execsql {
      PRAGMA writable_schema = on;
      CREATE TABLE sqlite_stat3(tbl,idx,neq,nlt,ndlt,sample);
      INSERT INTO sqlite_stat3 
      SELECT DISTINCT tbl, idx, 
        lindex(neq,0), lindex(nlt,0), lindex(ndlt,0), test_extract(sample, 0)
      FROM sqlite_stat4;
    } db2
    if {$bDropTable} { execsql {DROP TABLE sqlite_stat4} db2 }
    execsql { PRAGMA writable_schema = off }
  }

  # Modify the database schema cookie to ensure that the other connection
  # reloads the schema.
  #
  execsql {
    CREATE TABLE obscure_tbl_nm(x);
    DROP TABLE obscure_tbl_nm;
  } db2
  db2 close
}

# Populate the stat4 table according to the current contents of the db
#
proc populate_stat4 {{bDropTable 1}} {
  sqlite3 db2 test.db
  execsql { ANALYZE }

  ifcapable stat3 {
    execsql {
      PRAGMA writable_schema = on;
      CREATE TABLE sqlite_stat4(tbl,idx,neq,nlt,ndlt,sample);
      INSERT INTO sqlite_stat4 
      SELECT tbl, idx, neq, nlt, ndlt, sqlite_record(sample) 
      FROM sqlite_stat3;
    } db2
    if {$bDropTable} { execsql {DROP TABLE sqlite_stat3} db2 }
    execsql { PRAGMA writable_schema = off }
  }
 
  # Modify the database schema cookie to ensure that the other connection
  # reloads the schema.
  #
  execsql {
    CREATE TABLE obscure_tbl_nm(x);
    DROP TABLE obscure_tbl_nm;
  } db2
  db2 close
}

# Populate the stat4 table according to the current contents of the db.
# Leave deceptive data in the stat3 table. This data should be ignored
# in favour of that from the stat4 table.
#
proc populate_both {} {
  ifcapable stat4 { populate_stat3 0 }
  ifcapable stat3 { populate_stat4 0 }

  sqlite3 db2 test.db
  execsql {
    PRAGMA writable_schema = on;
    UPDATE sqlite_stat3 SET idx = 
      CASE idx WHEN 't1b' THEN 't1c' ELSE 't1b'
    END;
    PRAGMA writable_schema = off;
    CREATE TABLE obscure_tbl_nm(x);
    DROP TABLE obscure_tbl_nm;
  } db2
  db2 close
}

foreach {tn analyze_cmd} {
  1 populate_stat4 
  2 populate_stat3
  3 populate_both
} {
  reset_db
  do_test 1.$tn.1 {
    execsql { CREATE TABLE t1(a INTEGER PRIMARY KEY, b INT, c INT) }
    for {set i 0} {$i < 100} {incr i} {
      set c [expr int(pow(1.1,$i)/100)]
      set b [expr 125 - int(pow(1.1,99-$i))/100]
      execsql {INSERT INTO t1 VALUES($i, $b, $c)}
    }
  } {}

  execsql { CREATE INDEX t1b ON t1(b) }
  execsql { CREATE INDEX t1c ON t1(c) }
  $analyze_cmd

  do_execsql_test 1.$tn.2.1 { SELECT count(*) FROM t1 WHERE b=31 } 1
  do_execsql_test 1.$tn.2.2 { SELECT count(*) FROM t1 WHERE c=0  } 49
  do_execsql_test 1.$tn.2.3 { SELECT count(*) FROM t1 WHERE b=125  } 49
  do_execsql_test 1.$tn.2.4 { SELECT count(*) FROM t1 WHERE c=16  } 1

  do_eqp_test 1.$tn.2.5 {
    SELECT * FROM t1 WHERE b = 31 AND c = 0;
  } {SEARCH TABLE t1 USING INDEX t1b (b=?)}
  do_eqp_test 1.$tn.2.6 {
    SELECT * FROM t1 WHERE b = 125 AND c = 16;
  } {SEARCH TABLE t1 USING INDEX t1c (c=?)}

  do_execsql_test 1.$tn.3.1 { 
    SELECT count(*) FROM t1 WHERE b BETWEEN 0 AND 50
  } {6}
  do_execsql_test 1.$tn.3.2 { 
    SELECT count(*) FROM t1 WHERE c BETWEEN 0 AND 50
  } {90}
  do_execsql_test 1.$tn.3.3 { 
    SELECT count(*) FROM t1 WHERE b BETWEEN 75 AND 125
  } {90}
  do_execsql_test 1.$tn.3.4 { 
    SELECT count(*) FROM t1 WHERE c BETWEEN 75 AND 125
  } {6}

  do_eqp_test 1.$tn.3.5 {
    SELECT * FROM t1 WHERE b BETWEEN 0 AND 50 AND c BETWEEN 0 AND 50
  } {SEARCH TABLE t1 USING INDEX t1b (b>? AND b<?)}

  do_eqp_test 1.$tn.3.6 {
    SELECT * FROM t1 WHERE b BETWEEN 75 AND 125 AND c BETWEEN 75 AND 125
  } {SEARCH TABLE t1 USING INDEX t1c (c>? AND c<?)}

  do_eqp_test 1.$tn.3.7 {
    SELECT * FROM t1 WHERE b BETWEEN +0 AND +50 AND c BETWEEN +0 AND +50
  } {SEARCH TABLE t1 USING INDEX t1b (b>? AND b<?)}

  do_eqp_test 1.$tn.3.8 {
    SELECT * FROM t1
     WHERE b BETWEEN cast('0' AS int) AND cast('50.0' AS real)
       AND c BETWEEN cast('0' AS numeric) AND cast('50.0' AS real)
  } {SEARCH TABLE t1 USING INDEX t1b (b>? AND b<?)}

  do_eqp_test 1.$tn.3.9 {
    SELECT * FROM t1 WHERE b BETWEEN +75 AND +125 AND c BETWEEN +75 AND +125
  } {SEARCH TABLE t1 USING INDEX t1c (c>? AND c<?)}

  do_eqp_test 1.$tn.3.10 {
    SELECT * FROM t1
     WHERE b BETWEEN cast('75' AS int) AND cast('125.0' AS real)
       AND c BETWEEN cast('75' AS numeric) AND cast('125.0' AS real)
  } {SEARCH TABLE t1 USING INDEX t1c (c>? AND c<?)}
}

finish_test