General assortment of how my V2 was built and modified. I'll add STL's to the repo once I get around to cleaning them up a bit. A lot of this stuff was hacked together to make it work for my needs. Likely, there's a better mod out there to do exactly what I had done... but I couldn't find them.
- Raspberry Pi 4b
- Replaced clear panels w/DarkMode
- Added titanium backers
- Logitech C920x
- Added 6mm slot 20 dust covers (black)
- Swapped inductive probe for Cartographer
- https://www.printables.com/model/712328-no-z-chain-for-voron-24
- I'm actually on using bits and pieces from this...
- https://github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%202-Trident/2.4/Voron2.4_Z_Umbilical
- I'm only using the main cover, and hacked it a bit in fusion
- https://www.printables.com/model/789456-improved-stealthburner-faces-with-stripes-claws-an
- I went with the hex pattern
- https://www.printables.com/model/795364-voron-discodaylight-on-a-stick-led-mount-tray-with
- The hole alignment is a little off from the Disco on a Stick LED PCB's I had...
- https://mods.vorondesign.com/details/9Rdnf5vD2oaJLmR7BpAuQ
- Work great, I used 5mm or 5.5mm latches on 3mm panels with 3mm foam tape.