From 9b8679b69e37632400d0b8eae1ddf8933a068646 Mon Sep 17 00:00:00 2001
From: rehius <128579193+rehius@users.noreply.github.com>
Date: Mon, 22 May 2023 10:30:12 +0000
Subject: [PATCH] Update main.c

---
 main.c | 127 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 126 insertions(+), 1 deletion(-)

diff --git a/main.c b/main.c
index b09e478..70da09d 100644
--- a/main.c
+++ b/main.c
@@ -50,6 +50,131 @@ bool safe_test_voltage(int pin, float target, float range)
     return voltage >= (target - range) && voltage <= (target + range);
 }
 
+// test all ADC pins
+void self_test()
+{
+    absolute_time_t tio_time = make_timeout_time_ms(2500);
+    adc_init();
+    bool rst_ok = false, cmd_ok = false, d0_ok = false, clk_ok = false;
+    while (!time_reached(tio_time)) {
+        if (!rst_ok)
+            rst_ok |= safe_test_voltage(PIN_RST, 1.8f, 0.2f);
+        if (!cmd_ok)
+            cmd_ok |= safe_test_voltage(PIN_CMD, 1.8f, 0.2f);
+        if (!d0_ok)
+            d0_ok |= safe_test_voltage(PIN_DAT, 1.8f, 0.2f);
+        if (rst_ok && cmd_ok && d0_ok)
+            break;
+    }
+    if(!rst_ok)
+    {
+        halt_with_error(0, 2);
+    }
+    if(!cmd_ok)
+    {
+        halt_with_error(1, 2);
+    }
+    if(!d0_ok)
+    {
+        halt_with_error(2, 2);
+    }
+}
+
+extern bool was_self_reset;
+
+int main()
+{
+    // stop watchdog
+    *(uint32_t*)(0x40058000 + 0x3000) = (1 << 30);
+    // init reset, mosfet and LED
+    detect_board();
+    // clocks & voltage
+	init_system();
+    // fuses counter
+    init_fuses();
+    // LED & glitch & emmc PIO
+    upload_pio();
+    // check if this is the very first start
+    if (watchdog_caused_reboot() && boot_try == 0)
+	{
+		halt_with_error(1, 1);
+	}
+    // is chip reset required
+    bool force_button = detect_by_pull_up(1, 0);
+    // start LED
+    put_pixel(PIX_blu);
+    // test pins
+    self_test();
+    // wait till the CPU has proper power & started reading the eMMC
+    wait_for_boot(2500);
+    // ensure the BCT has not been overwritten by system update
+    bool force_check = fast_check();
+    was_self_reset = force_button || !is_configured(cid_buf + 1);
+    // perform payload rewrite if required
+    if (!force_check || was_self_reset) {
+        rewrite_payload();
+    }
+    // setup the glitch trigger for Mariko
+    if (mariko) {
+        pio1->instr_mem[gtrig_pio_offset + 4] = pio_encode_nop();
+        pio1->instr_mem[gtrig_pio_offset + 5] = pio_encode_nop();
+    }
+    // start from some default width
+    int width = 150;
+    bool glitched = false;
+    int offset = 0;
+    for (int full_try = 0; full_try < 2; full_try++) {
+        // try saved records
+        for (int y = 0; (y < 2) && !glitched; y++) {
+            int max_weight = -1;
+            while (1) {
+                offset = find_best_record(&max_weight);
+                if (offset == -1)
+                    break;
+                // try glitch
+                glitched = glitch_try_offset(offset, &width, 3);
+                if (glitched)
+                    break;
+            }
+        }
+        if (!glitched) {
+            for(int z = 0; (z < 2) && !glitched; z++) {
+                prepare_random_array();
+                for(int y = 0; y < OFFSET_CNT; y++)
+                {
+                    offset = offsets_array[y];
+                    glitched = glitch_try_offset(offset, &width, 4);
+                    if (glitched)
+                        break;
+                }
+            }
+        }
+        if (glitched) {
+            if ((count_fuses() & 1) != boot_slot)
+            {
+                // finish update / rollback
+                burn_fuse();
+            }
+            add_boot_record(offset);
+            halt_with_error(0, 1);
+        }
+        if (full_try == 0) {
+            rewrite_payload();
+        }
+    }
+    // attempts limit
+    halt_with_error(7, 3);
+}
+{
+    gpio_enable_input_output(pin);
+    adc_gpio_init(pin);
+    adc_select_input(pin - 26);
+    uint16_t result = adc_read();
+    gpio_disable_input_output(pin);
+    float voltage = result * 3.3f / (1 << 12);
+    return voltage >= (target - range) && voltage <= (target + range);
+}
+
 // test all ADC pins
 void self_test()
 {
@@ -170,4 +295,4 @@ int main()
     }
     // attempts limit
     halt_with_error(7, 3);
-}
\ No newline at end of file
+}