Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (841 commits)
  Staging: brcm80211: fix usage of roundup in structures
  Staging: bcm: fix up network device reference counting
  Staging: keucr: fix up US_ macro change
  staging: brcm80211: brcmfmac: Removed codeversion from firmware filenames.
  staging: brcm80211: Remove unnecessary header files.
  staging: brcm80211: Remove unnecessary includes from bcmutils.c
  staging: brcm80211: Removed unnecessary pktsetprio() function.
  Staging: brcm80211: remove typedefs.h
  Staging: brcm80211: remove uintptr typedef usage
  Staging: hv: remove struct vmbus_channel_interface
  Staging: hv: remove Open from struct vmbus_channel_interface
  Staging: hv: storvsc: call vmbus_open directly
  Staging: hv: netvsc: call vmbus_open directly
  Staging: hv: channel: export vmbus_open to modules
  Staging: hv: remove Close from struct vmbus_channel_interface
  Staging: hv: netvsc: call vmbus_close directly
  Staging: hv: storvsc: call vmbus_close directly
  Staging: hv: channel: export vmbus_close to modules
  Staging: hv: remove SendPacket from struct vmbus_channel_interface
  Staging: hv: storvsc: call vmbus_sendpacket directly
  ...

Fix up conflicts in
	drivers/staging/cx25821/cx25821-audio-upstream.c
	drivers/staging/cx25821/cx25821-audio.h
due to warring whitespace cleanups (neither of which were all that great)

Documentation/ABI/testing/sysfs-block-zram

@@ -0,0 +1,99 @@
+What:		/sys/block/zram<id>/disksize
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The disksize file is read-write and specifies the disk size
+		which represents the limit on the *uncompressed* worth of data
+		that can be stored in this disk.
+
+What:		/sys/block/zram<id>/initstate
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The disksize file is read-only and shows the initialization
+		state of the device.
+
+What:		/sys/block/zram<id>/reset
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The disksize file is write-only and allows resetting the
+		device. The reset operation frees all the memory assocaited
+		with this device.
+
+What:		/sys/block/zram<id>/num_reads
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The num_reads file is read-only and specifies the number of
+		reads (failed or successful) done on this device.
+
+What:		/sys/block/zram<id>/num_writes
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The num_writes file is read-only and specifies the number of
+		writes (failed or successful) done on this device.
+
+What:		/sys/block/zram<id>/invalid_io
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The invalid_io file is read-only and specifies the number of
+		non-page-size-aligned I/O requests issued to this device.
+
+What:		/sys/block/zram<id>/notify_free
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The notify_free file is read-only and specifies the number of
+		swap slot free notifications received by this device. These
+		notifications are send to a swap block device when a swap slot
+		is freed. This statistic is applicable only when this disk is
+		being used as a swap disk.
+
+What:		/sys/block/zram<id>/discard
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The discard file is read-only and specifies the number of
+		discard requests received by this device. These requests
+		provide information to block device regarding blocks which are
+		no longer used by filesystem.
+
+What:		/sys/block/zram<id>/zero_pages
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The zero_pages file is read-only and specifies number of zero
+		filled pages written to this disk. No memory is allocated for
+		such pages.
+
+What:		/sys/block/zram<id>/orig_data_size
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The orig_data_size file is read-only and specifies uncompressed
+		size of data stored in this disk. This excludes zero-filled
+		pages (zero_pages) since no memory is allocated for them.
+		Unit: bytes
+
+What:		/sys/block/zram<id>/compr_data_size
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The compr_data_size file is read-only and specifies compressed
+		size of data stored in this disk. So, compression ratio can be
+		calculated using orig_data_size and this statistic.
+		Unit: bytes
+
+What:		/sys/block/zram<id>/mem_used_total
+Date:		August 2010
+Contact:	Nitin Gupta <[email protected]>
+Description:
+		The mem_used_total file is read-only and specifies the amount
+		of memory, including allocator fragmentation and metadata
+		overhead, allocated for this disk. So, allocator space
+		efficiency can be calculated using compr_data_size and this
+		statistic.
+		Unit: bytes

Documentation/filesystems/00-INDEX

@@ -96,8 +96,6 @@ seq_file.txt
 	- how to use the seq_file API
 sharedsubtree.txt
 	- a description of shared subtrees for namespaces.
-smbfs.txt
-	- info on using filesystems with the SMB protocol (Win 3.11 and NT).
 spufs.txt
 	- info and mount options for the SPU filesystem used on Cell.
 sysfs-pci.txt

Documentation/ioctl/ioctl-number.txt

@@ -259,7 +259,7 @@ Code  Seq#(hex)	Include File		Comments
 't'	00-7F	linux/if_ppp.h
 't'	80-8F	linux/isdn_ppp.h
 't'	90	linux/toshiba.h
-'u'	00-1F	linux/smb_fs.h
+'u'	00-1F	linux/smb_fs.h		gone
 'v'	all	linux/videodev.h	conflict!
 'v'	00-1F	linux/ext2_fs.h		conflict!
 'v'	00-1F	linux/fs.h		conflict!

MAINTAINERS

@@ -1391,6 +1391,14 @@ L:	[email protected]
 S:	Supported
 F:	drivers/net/tg3.*
 
+BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
+M:	Brett Rudley <[email protected]>
+M:	Henry Ptasinski <[email protected]>
+M:	Nohee Ko <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	drivers/staging/brcm80211/
+
 BROCADE BFA FC SCSI DRIVER
 M:	Jing Huang <[email protected]>
 L:	[email protected]
@@ -3383,8 +3391,8 @@ F:	Documentation/kdump/
 KERNEL AUTOMOUNTER (AUTOFS)
 M:	"H. Peter Anvin" <[email protected]>
 L:	[email protected]
-S:	Odd Fixes
-F:	fs/autofs/
+S:	Obsolete
+F:	drivers/staging/autofs/
 
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
 M:	Ian Kent <[email protected]>
@@ -5667,7 +5675,7 @@ S:	Maintained
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <[email protected]>
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git
 L:	[email protected]
 S:	Maintained
 F:	drivers/staging/

arch/arm/mach-omap2/Makefile

@@ -108,6 +108,10 @@ obj-y					+= $(iommu-m) $(iommu-y)
 i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
 obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 
+ifneq ($(CONFIG_TIDSPBRIDGE),)
+obj-y					+= dsp.o
+endif
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o

arch/arm/mach-omap2/dsp.c

@@ -0,0 +1,85 @@
+/*
+ * TI's OMAP DSP platform device registration
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include "prm.h"
+#include "cm.h"
+#ifdef CONFIG_BRIDGE_DVFS
+#include <plat/omap-pm.h>
+#endif
+
+#include <plat/dsp.h>
+
+extern phys_addr_t omap_dsp_get_mempool_base(void);
+
+static struct platform_device *omap_dsp_pdev;
+
+static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
+#ifdef CONFIG_BRIDGE_DVFS
+	.dsp_set_min_opp = omap_pm_dsp_set_min_opp,
+	.dsp_get_opp = omap_pm_dsp_get_opp,
+	.cpu_set_freq = omap_pm_cpu_set_freq,
+	.cpu_get_freq = omap_pm_cpu_get_freq,
+#endif
+	.dsp_prm_read = prm_read_mod_reg,
+	.dsp_prm_write = prm_write_mod_reg,
+	.dsp_prm_rmw_bits = prm_rmw_mod_reg_bits,
+	.dsp_cm_read = cm_read_mod_reg,
+	.dsp_cm_write = cm_write_mod_reg,
+	.dsp_cm_rmw_bits = cm_rmw_mod_reg_bits,
+};
+
+static int __init omap_dsp_init(void)
+{
+	struct platform_device *pdev;
+	int err = -ENOMEM;
+	struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
+
+	pdata->phys_mempool_base = omap_dsp_get_mempool_base();
+
+	if (pdata->phys_mempool_base) {
+		pdata->phys_mempool_size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+		pr_info("%s: %x bytes @ %x\n", __func__,
+			pdata->phys_mempool_size, pdata->phys_mempool_base);
+	}
+
+	pdev = platform_device_alloc("omap-dsp", -1);
+	if (!pdev)
+		goto err_out;
+
+	err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+	if (err)
+		goto err_out;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto err_out;
+
+	omap_dsp_pdev = pdev;
+	return 0;
+
+err_out:
+	platform_device_put(pdev);
+	return err;
+}
+module_init(omap_dsp_init);
+
+static void __exit omap_dsp_exit(void)
+{
+	platform_device_unregister(omap_dsp_pdev);
+}
+module_exit(omap_dsp_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("TI's OMAP DSP platform device registration");
+MODULE_LICENSE("GPL");

arch/arm/plat-omap/common.c

@@ -19,6 +19,7 @@
 #include <plat/common.h>
 #include <plat/board.h>
 #include <plat/vram.h>
+#include <plat/dsp.h>
 
 
 #define NO_LENGTH_CHECK 0xffffffff
@@ -64,4 +65,5 @@ void __init omap_reserve(void)
 {
 	omapfb_reserve_sdram_memblock();
 	omap_vram_reserve_sdram_memblock();
+	omap_dsp_reserve_sdram_memblock();
 }

arch/arm/plat-omap/devices.c

@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/memblock.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -231,6 +232,75 @@ static void omap_init_uwire(void)
 static inline void omap_init_uwire(void) {}
 #endif
 
+/*-------------------------------------------------------------------------*/
+
+#if	defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+
+static struct resource wdt_resources[] = {
+	{
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_wdt_device = {
+	.name	   = "omap_wdt",
+	.id	     = -1,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static void omap_init_wdt(void)
+{
+	if (cpu_is_omap16xx())
+		wdt_resources[0].start = 0xfffeb000;
+	else if (cpu_is_omap2420())
+		wdt_resources[0].start = 0x48022000; /* WDT2 */
+	else if (cpu_is_omap2430())
+		wdt_resources[0].start = 0x49016000; /* WDT2 */
+	else if (cpu_is_omap343x())
+		wdt_resources[0].start = 0x48314000; /* WDT2 */
+	else if (cpu_is_omap44xx())
+		wdt_resources[0].start = 0x4a314000;
+	else
+		return;
+
+	wdt_resources[0].end = wdt_resources[0].start + 0x4f;
+
+	(void) platform_device_register(&omap_wdt_device);
+}
+#else
+static inline void omap_init_wdt(void) {}
+#endif
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+
+static phys_addr_t omap_dsp_phys_mempool_base;
+
+void __init omap_dsp_reserve_sdram_memblock(void)
+{
+	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+	phys_addr_t paddr;
+
+	if (!size)
+		return;
+
+	paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+	if (!paddr) {
+		pr_err("%s: failed to reserve %x bytes\n",
+				__func__, size);
+		return;
+	}
+
+	omap_dsp_phys_mempool_base = paddr;
+}
+
+phys_addr_t omap_dsp_get_mempool_base(void)
+{
+	return omap_dsp_phys_mempool_base;
+}
+EXPORT_SYMBOL(omap_dsp_get_mempool_base);
+#endif
+
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):

arch/arm/plat-omap/include/plat/dsp.h

@@ -0,0 +1,31 @@
+#ifndef __OMAP_DSP_H__
+#define __OMAP_DSP_H__
+
+#include <linux/types.h>
+
+struct omap_dsp_platform_data {
+	void (*dsp_set_min_opp) (u8 opp_id);
+	u8 (*dsp_get_opp) (void);
+	void (*cpu_set_freq) (unsigned long f);
+	unsigned long (*cpu_get_freq) (void);
+	unsigned long mpu_speed[6];
+
+	/* functions to write and read PRCM registers */
+	void (*dsp_prm_write)(u32, s16 , u16);
+	u32 (*dsp_prm_read)(s16 , u16);
+	u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+	void (*dsp_cm_write)(u32, s16 , u16);
+	u32 (*dsp_cm_read)(s16 , u16);
+	u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+	phys_addr_t phys_mempool_base;
+	phys_addr_t phys_mempool_size;
+};
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void omap_dsp_reserve_sdram_memblock(void);
+#else
+static inline void omap_dsp_reserve_sdram_memblock(void) { }
+#endif
+
+#endif

drivers/misc/Kconfig

@@ -447,5 +447,6 @@ source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
 source "drivers/misc/iwmc3200top/Kconfig"
+source "drivers/misc/ti-st/Kconfig"
 
 endif # MISC_DEVICES

drivers/misc/Makefile

@@ -40,3 +40,4 @@ obj-y				+= cb710/
 obj-$(CONFIG_VMWARE_BALLOON)	+= vmw_balloon.o
 obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
 obj-$(CONFIG_PCH_PHUB)		+= pch_phub.o
+obj-y				+= ti-st/