diff --git a/README.md b/README.md index c24eeb6da..7156eeeb1 100644 --- a/README.md +++ b/README.md @@ -1,6 +1,6 @@ -############################################################################## -Small modification and tested on custom made 3d/cnc board with arduino -############################################################################## + +**Small modification and tested on custom made 3d/cnc board with arduino** + nano 328p. For GCODE sender, i use my own gcodesender (on github too) @@ -11,43 +11,52 @@ nano 328p. For GCODE sender, i use my own gcodesender (on github too) 4. Implement Adjust Temp, (see EEPROM), basically just add /reduce temperature for M109, because who knows same gcode file request same 180degree, but on different printer, different filament loaded, need to add few degree, without editing the Gcode file/reslice. 5. DELTA Printer , work in progress for nano 328p, of course need low number of line buffer (8 is ok). and maybe other fixes so can work with my gcode sender better. +10-6-2017 +1. Add JerkXY,JerkZ, and segments to EEPROM. +2. Reset factory M502 (still have bug on zmax and accel) +3. Limit the F from gcodeprocess, so when calculate segment_total, it will be correct. +4. Optional to include INCH coordinate (nowdays mosly slicer using mm) +5. Update configtool + + + ![Teacup3D PCB](https://raw.githubusercontent.com/ryannining/Teacup_Firmware/master/pcb/schematic.png) -############################################################################## -# # -# Teacup - lean and efficient firmware for RepRap printers # -# # -# by Triffid Hunter, Traumflug, jakepoz, many others. # -# # -############################################################################## - -For installation instructions, see -http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or -http://reprap.org/wiki/Teacup_Firmware#Developer_Installation - -For documentation, see -http://reprap.org/wiki/Teacup_Firmware - - -############################################################################## -# # -# This firmware is Copyright (c) ... # -# 2009 - 2010 Michael Moon aka Triffid_Hunter # -# 2010 - 2013 Markus "Traumflug" Hitter # -# # -# This program is free software; you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation; either version 2 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program; if not, write to the Free Software # -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # -# # -############################################################################## + ############################################################################## + # # + # Teacup - lean and efficient firmware for RepRap printers # + # # + # by Triffid Hunter, Traumflug, jakepoz, many others. # + # # + ############################################################################## + + For installation instructions, see + http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or + http://reprap.org/wiki/Teacup_Firmware#Developer_Installation + + For documentation, see + http://reprap.org/wiki/Teacup_Firmware + + + ############################################################################## + # # + # This firmware is Copyright (c) ... # + # 2009 - 2010 Michael Moon aka Triffid_Hunter # + # 2010 - 2013 Markus "Traumflug" Hitter # + # # + # This program is free software; you can redistribute it and/or modify # + # it under the terms of the GNU General Public License as published by # + # the Free Software Foundation; either version 2 of the License, or # + # (at your option) any later version. # + # # + # This program is distributed in the hope that it will be useful, # + # but WITHOUT ANY WARRANTY; without even the implied warranty of # + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # + # GNU General Public License for more details. # + # # + # You should have received a copy of the GNU General Public License # + # along with this program; if not, write to the Free Software # + # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # + # # + ##############################################################################