Home-Assistant Custom Component for Slide

This custom component home-assistant (http://www.home-assistant.io) can control the Slide (https://slide.store).

Slide

Requirements

• Home Assistant 0.94+

Installation

• Copy directory slide <config dir>/custom_components directory.
• Configure with config below.
• Restart Home-Assistant.

Usage

To use this component in your installation for the Cloud API, add the following to your configuration.yaml file:

# Example configuration.yaml entry

slide:
  username: [email protected]
  password: secret
  scan_interval: 30
  invert_position: false

Configuration variables:

• username (Required): The e-mail used to register your account with api.goslide.io, with your iPhone/Android App
• password (Required): The password of your account with api.goslide.io
• scan_interval (Optional): Number of seconds between polls (default = 30)
• invert_position (Optional): If the position should be inverted e.g. 0% -> 100% and 100% -> 0% (default = false)

To use this component in your installation With the Local API, add the following to your configuration.yaml file for each Slide:

# Example yaml entry

cover:
  - platform: slide
    host: 192.168.1.1
    password: 12345678

Configuration variables:

• host (Required): The IP address or hostname of your local Slide
• password (Required): The device code of your Slide (inside of the Slide or in the box, length is 8 characters)
• invert_position (Optional): If the position should be inverted e.g. 0% -> 100% and 100% -> 0% (default = false)

Debugging

It is possible to debug the Slide component and API library, this can be done by adding the following lines to the configuration.yaml file:

logger:
  logs:
    goslideapi: debug
    custom_components.slide: debug
    homeassistant.components.slide: debug

TO DO

• Add calibration as a service