Galileo 2

NOTE: Galileo 2 Extruder is currently at RELEASE status. G2SA and G2Z/G2ZXL are still PUBLIC BETA pending some further testing.

Welcome everyone, to Galileo 2!

Here you will find all of the files for the Galileo 2 projects, including a Voron Stealthburner drop-in Extruder (G2E), Z-Drives (G2Z) for V2-style printers (including V2, Micron, etc.), and a Standalone Extruder (G2SA) with mounting options for Orbiter-2.0-style or Sherpa-Mini-style mounts.

For those that are curious about what Galileo 2 offers over Galileo 1, here's a short list of benefits:

• Galileo 2 is a full redesign, moving to a 9:1 gear ratio and optimizing the gearbox design over Galileo 1. No parts from Galileo 1 are reused with Galileo 2.
• Custom 9T stepper with a taller spur gear resulting in 20% higher contact surface area than existing 10T stepper designs, resulting in better wear characteristics and power transfer.
• Proper meshing of gears due to number of stepper teeth being divisible by number of planets (9T sun / 3 planets), which gives even loading on the planets / sun gear and improves wear characteristics and power transfer. Previous designs with 10T steppers had uneven loading on the planet gears.

Galileo 2 Resellers List

TO NOTE! ONLY the kits sold by LDO are "official" Galileo 2 kits!

Reseller	Location	Website
Fabreeko	USA	G2E & G2Z
West3D	USA	G2E & G2Z
Filastruder	USA	G2E / G2Z
DFH	USA	G2E / G2Z
KB-3D	USA	G2E / G2Z / G2Z x4 Kit
Sparta3d	Canada	G2E / G2Z
3dlabtech	Canada	G2E / G2Z
Dremc	Australia	G2E / G2Z
PhaserFPV	Asutralia	G2E & G2Z
Uniqueprints	Australia	G2E / G2Z
OneTwo3d	UK	G2E / G2Z
3DO	Denmark	G2E / G2Z
3Dparts	Austria	G2E
Lecktor	Estonia	G2E
Zen3d	Hungary	G2E / G2Z
Lab4450	Portugal	G2E / G2Z
Levendig dsgn	Netherlands	G2E
Jacks Filament	Germany	G2E
Alchemy3d	Germany	G2E
replimat	Germany	G2E
SWBAC	Kuwait	G2E
Sugoi3d	Japan	G2E
Trianglelabs	Global	G2E & G2Z
Mellow	Global	G2E & G2Z

Klipper Settings for G2 Extruders (G2E and G2SA)

You must update both the gear_ratio and rotation_distance in your Klipper configuration and do a standard extruder calibration after installing the Galileo 2 Extruder. Additionally, your run_current will need to be updated.

[extruder]
rotation_distance: 47.088
gear_ratio: 9:1
microsteps: 16

[tmc2209 extruder]
run_current: 0.6

Klipper Settings for G2 Z Drivers (G2Z)

You must update both the gear_ratio and rotation_distance in your Klipper configuration after installing the Galileo 2 Z Driver. Additionally, your run_current will need to be updated.

[stepper_z]
rotation_distance: 40
gear_ratio: 9:1
microsteps: 32

[tmc2209 stepper_z]
run_current: 0.8