diff --git a/keyboards/converter/Makefile b/keyboards/converter/Makefile new file mode 100644 index 000000000000..4e2a6f00fd8e --- /dev/null +++ b/keyboards/converter/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/converter/converter.c b/keyboards/converter/converter.c new file mode 100644 index 000000000000..aa4bef63a956 --- /dev/null +++ b/keyboards/converter/converter.c @@ -0,0 +1 @@ +#include "converter.h" \ No newline at end of file diff --git a/keyboards/converter/converter.h b/keyboards/converter/converter.h new file mode 100644 index 000000000000..7a4a4835e61e --- /dev/null +++ b/keyboards/converter/converter.h @@ -0,0 +1 @@ +#include "quantum.h" \ No newline at end of file diff --git a/keyboards/converter/ibm_terminal/Makefile b/keyboards/converter/ibm_terminal/Makefile new file mode 100644 index 000000000000..191c6bb664de --- /dev/null +++ b/keyboards/converter/ibm_terminal/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/converter/ibm_terminal/README b/keyboards/converter/ibm_terminal/README new file mode 100644 index 000000000000..6b7aff2c842f --- /dev/null +++ b/keyboards/converter/ibm_terminal/README @@ -0,0 +1,40 @@ +Keyboard converter for IBM terminal keyboard +============================================ + +This is a port of TMK's converter/terminal_usb to QMK. + +It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy. +I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys). + +Source code: https://github.com/tmk/tmk_keyboard +Article: http://geekhack.org/index.php?topic=27272.0 + + +CONNECTION +---------- +Keyboard ATMega32U4 +---------------------- +Data: PD2 +Clock: PD5 + +And VCC and GND, of course. See RESOURCE for keyboard connector pin assign. + + +BUILD +----- +$ git clone https://github.com/tmk/tmk_keyboard.git +$ cd converter/terminal_usb +$ make + + +RESOURCE +-------- +Soarer's Converter: http://geekhack.org/index.php?topic=17458.0 +102keys(1392595): http://geekhack.org/index.php?topic=10737.0 +122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html +KbdBabel: http://www.kbdbabel.org/ +RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png +DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png +WinAVR: http://winavr.sourceforge.net/ + +EOF diff --git a/keyboards/converter/ibm_terminal/config.h b/keyboards/converter/ibm_terminal/config.h new file mode 100644 index 000000000000..4dd85f6983a3 --- /dev/null +++ b/keyboards/converter/ibm_terminal/config.h @@ -0,0 +1,138 @@ +/* +Copyright 2012 Jun Wako +Copyright 2016 Priyadi Iman Nurcahyo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6535 +#define DEVICE_VER 0x0100 +#define MANUFACTURER QMK +#define PRODUCT IBM Terminal Keyboard +#define DESCRIPTION USB converter for IBM Terminal Keyboard + + +/* matrix size */ +#define MATRIX_ROWS 17 // keycode bit: 3-0 +#define MATRIX_COLS 8 // keycode bit: 6-4 + + +/* legacy keymap support */ +#define USE_LEGACY_KEYMAP + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \ +) + + +/* + * PS/2 USART configuration for ATMega32U4 + */ +#ifdef PS2_USE_USART +/* XCK for clock line */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 5 +/* RXD for data line */ +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 + +/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ +/* set DDR of CLOCK as input to be slave */ +#define PS2_USART_INIT() do { \ + PS2_CLOCK_DDR &= ~(1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include "keycode.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "ibm_terminal.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // Layer 0 + + KEYMAP( + KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + + KC_PSCR,KC_ESC, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_NO, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, + KC_SLCK,KC_INT4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC, KC_NO, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_PAUS,KC_INT5, KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_BSLS,KC_ENT, KC_UP, KC_P4, KC_P5, KC_P6, KC_PCMM, + KC_APP, KC_INT6, KC_LSFT,KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_LEFT,KC_INT2,KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_RGUI,KC_LGUI, KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_GRV, KC_DOWN, KC_NO, KC_P0, KC_PDOT,KC_NO + ), + +/* 101-key keymaps + */ + /* 0: default + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | + * |-----------------------------------------------------------| `-----------' |-----------| +| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------|Ent| + * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| | + * `----' `---------------------------------------' `----' `-----------' `---------------' + */ +/* + KEYMAP_101( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK, KC_BRK, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6,KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT,KC_PENT + ), +*/ +}; diff --git a/keyboards/converter/ibm_terminal/keymaps/priyadi/Makefile b/keyboards/converter/ibm_terminal/keymaps/priyadi/Makefile new file mode 100644 index 000000000000..9ec24649438f --- /dev/null +++ b/keyboards/converter/ibm_terminal/keymaps/priyadi/Makefile @@ -0,0 +1,27 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +UNICODEMAP_ENABLE ?= yes +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +PS2_USE_USART ?= yes +API_SYSEX_ENABLE ?= no + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../../Makefile +endif + diff --git a/keyboards/converter/ibm_terminal/keymaps/priyadi/config.h b/keyboards/converter/ibm_terminal/keymaps/priyadi/config.h new file mode 100644 index 000000000000..7fa3bf328ec9 --- /dev/null +++ b/keyboards/converter/ibm_terminal/keymaps/priyadi/config.h @@ -0,0 +1,6 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#endif diff --git a/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c b/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c new file mode 100644 index 000000000000..592f7654ba54 --- /dev/null +++ b/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c @@ -0,0 +1,312 @@ +/* +Copyright 2016 Priyadi Iman Nurcahyo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "keycode.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "ibm_terminal.h" +#include "action_layer.h" + +// Fillers to make layering clearer + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +enum layers { + QWE, // qwerty + COL, // colemak + WOR, // workman + DVO, // dvorak + + MOU, // mouse keys + EMO, // emoji + SYS, // system +}; + +enum keycodes { + // default layout switcher + LAY_QWE = SAFE_RANGE, + LAY_COL, + LAY_WOR, + LAY_DVO, + + // layer switchers + LYR_SYS, + LYR_EMO, + + // os switchers + OS_LIN, + OS_WIN, + OS_MAC, +}; + +// unicode map + +enum unicode_name { + GRIN, // grinning face 😊 + TJOY, // tears of joy 😂 + SMILE, // grining face with smiling eyes 😁 + HEART, // heart ❤ + EYERT, // smiling face with heart shaped eyes 😍 + CRY, // crying face 😭 + SMEYE, // smiling face with smiling eyes 😊 + UNAMU, // unamused 😒 + KISS, // kiss 😘 + HART2, // two hearts 💕 + WEARY, // weary 😩 + OKHND, // ok hand sign 👌 + PENSV, // pensive 😔 + SMIRK, // smirk 😏 + RECYC, // recycle ♻ + WINK, // wink 😉 + THMUP, // thumb up 👍 + THMDN, // thumb down 👎 + PRAY, // pray 🙏 + PHEW, // relieved 😌 + MUSIC, // musical notes + FLUSH, // flushed 😳 + CELEB, // celebration 🙌 + CRY2, // crying face 😢 + COOL, // smile with sunglasses 😎 + NOEVS, // see no evil + NOEVH, // hear no evil + NOEVK, // speak no evil + POO, // pile of poo + EYES, // eyes + VIC, // victory hand + BHART, // broken heart + SLEEP, // sleeping face + SMIL2, // smiling face with open mouth & sweat + HUNRD, // 100 + CONFU, // confused + TONGU, // face with tongue & winking eye + DISAP, // disappointed + YUMMY, // face savoring delicious food + CLAP, // hand clapping + FEAR, // face screaming in fear + HORNS, // smiling face with horns + HALO, // smiling face with halo + BYE, // waving hand + SUN, // sun + MOON, // moon + SKULL, // skull +}; + +const uint32_t PROGMEM unicode_map[] = { + [GRIN] = 0x1F600, + [TJOY] = 0x1F602, + [SMILE] = 0x1F601, + [HEART] = 0x2764, + [EYERT] = 0x1f60d, + [CRY] = 0x1f62d, + [SMEYE] = 0x1F60A, + [UNAMU] = 0x1F612, + [KISS] = 0x1F618, + [HART2] = 0x1F495, + [WEARY] = 0x1F629, + [OKHND] = 0x1F44C, + [PENSV] = 0x1F614, + [SMIRK] = 0x1F60F, + [RECYC] = 0x267B, + [WINK] = 0x1F609, + [THMUP] = 0x1F44D, + [THMDN] = 0x1F44E, + [PRAY] = 0x1F64F, + [PHEW] = 0x1F60C, + [MUSIC] = 0x1F3B6, + [FLUSH] = 0x1F633, + [CELEB] = 0x1F64C, + [CRY2] = 0x1F622, + [COOL] = 0x1F60E, + [NOEVS] = 0x1F648, + [NOEVH] = 0x1F649, + [NOEVK] = 0x1F64A, + [POO] = 0x1F4A9, + [EYES] = 0x1F440, + [VIC] = 0x270C, + [BHART] = 0x1F494, + [SLEEP] = 0x1F634, + [SMIL2] = 0x1F605, + [HUNRD] = 0x1F4AF, + [CONFU] = 0x1F615, + [TONGU] = 0x1F61C, + [DISAP] = 0x1F61E, + [YUMMY] = 0x1F60B, + [CLAP] = 0x1F44F, + [FEAR] = 0x1F631, + [HORNS] = 0x1F608, + [HALO] = 0x1F607, + [BYE] = 0x1F44B, + [SUN] = 0x2600, + [MOON] = 0x1F314, + [SKULL] = 0x1F480, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* qwerty */ + [QWE] = KEYMAP( + KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_PSCR, KC_SLCK, KC_PAUS, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + + MO(EMO), MO(SYS), KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_MNXT, KC_VOLU, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, XXXXXXX, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_MPLY, KC_MUTE, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_UP, KC_P4, KC_P5, KC_P6, KC_PCMM, + KC_MPRV, KC_VOLD, KC_LSFT, KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, KC_LEFT, TG(MOU), KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LGUI, KC_APP, KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_DOWN, XXXXXXX, KC_P0, KC_PDOT, XXXXXXX + ), + + /* colemak */ + [COL] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + /* workman */ + [WOR] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + /* dvorak */ + [DVO] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + /* system */ + [SYS] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, LAY_QWE, OS_WIN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, LAY_DVO, _______, _______, _______, _______, LAY_WOR, OS_LIN, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, LAY_COL, _______, _______, _______, OS_MAC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + /* mouse keys */ + [MOU] = KEYMAP( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, KC_BTN4, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_U, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, KC_BTN5, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, _______, KC_MS_R, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_BTN1, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_D, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), + + /* emoji */ + [EMO] = KEYMAP( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY), X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV),XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN), X(HEART),X(BYE), X(KISS), X(CELEB),X(COOL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,X(SLEEP),X(CLAP), X(CRY), X(VIC), X(BHART),X(SUN), X(SMEYE),X(WINK), X(MOON), X(CONFU), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), + + /* + [XXX] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + */ +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + /* layout switcher */ + case LAY_QWE: + if (record->event.pressed) { + persistant_default_layer_set(1UL<event.pressed) { + persistant_default_layer_set(1UL<event.pressed) { + persistant_default_layer_set(1UL<event.pressed) { + persistant_default_layer_set(1UL< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "stdint.h" +#include "ps2.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + uint8_t ps2_led = 0; + if (usb_led & (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include +#include +#include "print.h" +#include "util.h" +#include "debug.h" +#include "ps2.h" +#include "matrix.h" + +#define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +#define print_matrix_header() print("\nr/c 01234567\n") +#define matrix_bitpop(i) bitpop(matrix[i]) +#define ROW_SHIFTER ((uint8_t)1) + + +static void matrix_make(uint8_t code); +static void matrix_break(uint8_t code); + + +/* + * Matrix Array usage: + * 'Scan Code Set 3' is assigned into 17x8 cell matrix. + * + * 8bit wide + * +---------+ + * 0| | + * :| | 0x00-0x87 + * ;| | + * 17| | + * +---------+ + */ +static uint8_t matrix[MATRIX_ROWS]; +#define ROW(code) (code>>3) +#define COL(code) (code&0x07) + + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +void matrix_init(void) +{ + debug_enable = true; + //debug_matrix = true; + //debug_keyboard = true; + //debug_mouse = false; + + ps2_host_init(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; + + matrix_init_user(); + return; +} + +uint8_t matrix_scan(void) +{ + + // scan code reading states + static enum { + RESET, + RESET_RESPONSE, + KBD_ID0, + KBD_ID1, + CONFIG, + READY, + F0, + } state = RESET; + + uint8_t code; + if ((code = ps2_host_recv())) { + debug("r"); debug_hex(code); debug(" "); + } + + switch (state) { + case RESET: + debug("wFF "); + if (ps2_host_send(0xFF) == 0xFA) { + debug("[ack]\nRESET_RESPONSE: "); + state = RESET_RESPONSE; + } + break; + case RESET_RESPONSE: + if (code == 0xAA) { + debug("[ok]\nKBD_ID: "); + state = KBD_ID0; + } else if (code) { + debug("err\nRESET: "); + state = RESET; + } + break; + // after reset receive keyboad ID(2 bytes) + case KBD_ID0: + if (code) { + state = KBD_ID1; + } + break; + case KBD_ID1: + if (code) { + debug("\nCONFIG: "); + state = CONFIG; + } + break; + case CONFIG: + debug("wF8 "); + if (ps2_host_send(0xF8) == 0xFA) { + debug("[ack]\nREADY\n"); + state = READY; + } + break; + case READY: + switch (code) { + case 0x00: + break; + case 0xF0: + state = F0; + debug(" "); + break; + default: // normal key make + if (code < 0x88) { + matrix_make(code); + } else { + debug("unexpected scan code at READY: "); debug_hex(code); debug("\n"); + } + state = READY; + debug("\n"); + } + break; + case F0: // Break code + switch (code) { + case 0x00: + break; + default: + if (code < 0x88) { + matrix_break(code); + } else { + debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); + } + state = READY; + debug("\n"); + } + break; + } + return 1; +} + +inline +uint8_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +inline +static void matrix_make(uint8_t code) +{ + if (!matrix_is_on(ROW(code), COL(code))) { + matrix[ROW(code)] |= 1<. /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 +#define USB_MAX_POWER_CONSUMPTION 50 + /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk index 893cfa7a848e..64b2db8158e3 100644 --- a/keyboards/ergodox/ez/rules.mk +++ b/keyboards/ergodox/ez/rules.mk @@ -72,7 +72,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # SLEEP_LED_ENABLE = no -API_SYSEX_ENABLE ?= yes +API_SYSEX_ENABLE ?= no RGBLIGHT_ENABLE ?= yes ifndef QUANTUM_DIR diff --git a/keyboards/ergodox/keymaps/default/keymap.c b/keyboards/ergodox/keymaps/default/keymap.c index 4eff28085021..4477cab3105c 100644 --- a/keyboards/ergodox/keymaps/default/keymap.c +++ b/keyboards/ergodox/keymaps/default/keymap.c @@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H |J/Alt | K | L |; / L2|' / Cmd | + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' @@ -49,11 +49,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_HOME, KC_SPC,KC_BSPC,KC_END, // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, ALT_T(KC_J), KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, KC_LALT, CTL_T(KC_ESC), KC_PGUP, KC_PGDN,KC_TAB, KC_ENT diff --git a/keyboards/ergodox/keymaps/pvinis/keymap.c b/keyboards/ergodox/keymaps/pvinis/keymap.c index df906201a886..3c49118842fa 100644 --- a/keyboards/ergodox/keymaps/pvinis/keymap.c +++ b/keyboards/ergodox/keymaps/pvinis/keymap.c @@ -13,20 +13,16 @@ enum { QWERTY, CARPALX, SYSCTL, + MOUSE, }; // extra keys enum { NONE = 0, - // mouse - MS_UL, // up left - MS_UR, // up right - MS_DL, // down left - MS_DR, // down right - // tap dance TD_FLSH, // flash keyboard + TD_LAYR, // SYSCTL and MOUSE layer switch }; // application selection @@ -49,10 +45,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | | | | | | | | | | | | | | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | + * | | | | | | |SYSCTL| | | | | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. - * |BEGIN |QWERTY| |SYSCTL| | + * |BEGIN |QWERTY| | | | * ,------|------|------| |------+--------+------. * | | |CARPAL| |Slack | | | * |Backsp|LShift|------| |------| Enter |Space | @@ -66,15 +62,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,TG(BEGIN) ,TG(QWERTY) - ,TG(CARPALX) - ,KC_BSPC ,KC_LSFT ,TG(SYSCTL) + ,TG(BEGIN) ,TD(TD_LAYR) + ,TG(MOUSE) + ,KC_BSPC ,KC_LSFT ,TD(TD_LAYR) - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,MO(SYSCTL) ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TG(SYSCTL) ,KC_NO ,AP_SLCK @@ -85,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * a beginner's keymap i currently use. * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | 6 | | 6 | 7 | 8 | 9 | 0 | - | = | + * | | 1 | 2 | 3 | 4 | 5 | opt | | 6 | 7 | 8 | 9 | 0 | - | = | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \ | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| @@ -104,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `--------------------' `----------------------' */ [BEGIN] = KEYMAP( - KC_TRNS ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_6 + KC_TRNS ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_LALT ,KC_TAB ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC ,CTL_T(KC_ESC) ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,KC_LPRN @@ -114,11 +110,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS ,KC_EQL - ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS - ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,KC_ENT - ,KC_RPRN ,KC_N ,KC_M ,KC_COMM ,KC_DOT ,KC_SLSH ,KC_RSFT - ,KC_UP ,KC_DOWN ,KC_TRNS ,KC_QUOT ,KC_TRNS + ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS ,KC_EQL + ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS + ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,KC_ENT + ,KC_RPRN ,KC_N ,KC_M ,KC_COMM ,KC_DOT ,KC_SLSH ,KC_RSFT + ,KC_TRNS ,KC_DOWN ,KC_TRNS ,KC_QUOT ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS @@ -213,30 +209,73 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_TRNS ,KC_TRNS ,KC_TRNS ), - /* SYSCTL + * a keymap to control my system. + * + * ,--------------------------------------------------. ,------------------------------------------------------. + * | ^ | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+----------+------+------+--------| + * | | | | | | | | | | Mute | Home | Up | End | | | + * |--------+------+------+------+------+------| | | |------+------+----------+------+------+--------| + * | | | | | | |------| |------|VolUp | Left | Down |Right | | Lock | + * |--------+------+------+------+------+------| | | |------+------+----------+------+------+--------| + * | | | | | | | | | |VolDn | Prev |Play/Pause| Next | | Sleep | + * `--------+------+------+------+------+-------------' `-------------+------+----------+------+------+--------' + * | | | | | | | | | | | Power| + * `----------------------------------' `--------------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | ^ | | | | | + * `--------------------' `--------------------' + */ +[SYSCTL] = KEYMAP( + KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO +,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + + ,KC_NO ,KC_NO + ,KC_NO + ,KC_NO ,KC_NO ,KC_TRNS + + /*,KC_POP /// */,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + /* /// ,KC_PTRN*/,KC_NO ,KC_MUTE ,KC_HOME ,KC_UP ,KC_END ,KC_NO ,KC_NO + ,KC_VOLU ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_NO ,LCTL(LSFT(KC_PWR)) + ,KC_NO ,KC_VOLD ,KC_MPRV ,KC_MPLY ,KC_MNXT ,KC_NO ,KC_SLEP + ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_PWR + + ,KC_NO ,KC_NO + ,KC_NO + ,KC_NO ,KC_NO ,KC_NO +), + +/* MOUSE * a keymap to control my system. * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | Mute |VolDn |VolUp | | + * | ^ | | | | | | | | | | | | | | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | | | | | |MsUpL | MsUp |MsUpR | | | + * | | | | | | | | | | | | MsUp | | | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| |MsLeft| MsDn |MsRght| | Lock | + * | | | | | | |------| |------| |MsLeft| MsDn |MsRght| | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | |MsDnL | MsDn | | | Sleep | + * | | | | | | | | | | | | | | | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | Power| + * | | | | | | | | | | | | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. * | | | | |MidClk| * ,------|------|------| |------+------+------. * | | | | | |Left |Right | * | | |------| |------| Click| Click| - * | | | | | | | | + * | | | ^ | | | | | * `--------------------' `--------------------' */ -[SYSCTL] = KEYMAP( +[MOUSE] = KEYMAP( KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO @@ -245,13 +284,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_TRNS - /*,KC_POP*/,KC_NO ,KC_NO ,KC_NO ,KC_MUTE ,KC_VOLD ,KC_VOLU ,KC_NO - /*,KC_PTRN*/,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,LCTL(LSFT(KC_PWR)) - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_SLEP - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_PWR + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_MS_U ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO + ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO @@ -341,48 +380,29 @@ void matrix_init_user() { ergodox_led_all_off(); } -// extra keys -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) { +// light up leds based on the layer +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); - // mouse - case MS_UL: - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_LEFT); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_LEFT); - } - break; - case MS_UR: - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_RIGHT); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_RIGHT); - } + switch(layer) { + case SYSCTL: + ergodox_right_led_3_on(); break; - case MS_DL: - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_LEFT); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_LEFT); - } + case MOUSE: + ergodox_right_led_2_on(); break; - case MS_DR: - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_RIGHT); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_RIGHT); - } + default: + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); break; } +} + +// extra keys +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + } return MACRO_NONE; } @@ -425,6 +445,31 @@ void flash_dance_reset(qk_tap_dance_state_t *state, void *user_data) { ergodox_right_led_3_off(); } +// SYSCTL on first tap, MOUSE ON second tap +void layers_dance_finished(qk_tap_dance_state_t *state, void *user_data) { + uint8_t layer = biton32(layer_state); + + switch(state->count) { + case 1: + switch(layer) { + case SYSCTL: + layer_off(SYSCTL); + break; + case MOUSE: + layer_off(MOUSE); + break; + default: + layer_on(SYSCTL); + break; + } + break; + case 2: + layer_on(MOUSE); + break; + } +} + qk_tap_dance_action_t tap_dance_actions[] = { [TD_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED( flash_each_tap, flash_dance_finished, flash_dance_reset ), + [TD_LAYR] = ACTION_TAP_DANCE_FN_ADVANCED( NULL, layers_dance_finished, NULL ), }; diff --git a/keyboards/ergodox/keymaps/reset_eeprom/keymap.c b/keyboards/ergodox/keymaps/reset_eeprom/keymap.c new file mode 100644 index 000000000000..f708454ce241 --- /dev/null +++ b/keyboards/ergodox/keymaps/reset_eeprom/keymap.c @@ -0,0 +1,140 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, + EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, + EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, + EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, + EPRM, EPRM, EPRM, EPRM,EPRM, + EPRM, EPRM, + EPRM, + EPRM,EPRM,EPRM, + // right hand + EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, + EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, + EPRM, EPRM, EPRM, EPRM, EPRM,EPRM, + EPRM,EPRM, EPRM, EPRM,EPRM, EPRM, EPRM, + EPRM, EPRM,EPRM,EPRM, EPRM, + EPRM, EPRM, + EPRM, + EPRM,EPRM, EPRM + ) +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + case 1: + if (record->event.pressed) { // For resetting EEPROM + eeconfig_init(); + } + break; + } + return MACRO_NONE; +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode(1); + #endif + } + return false; + break; + } + return true; +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/handwired/pilcrow/Makefile b/keyboards/handwired/pilcrow/Makefile new file mode 100644 index 000000000000..191c6bb664de --- /dev/null +++ b/keyboards/handwired/pilcrow/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h new file mode 100644 index 000000000000..d63eeba36e8b --- /dev/null +++ b/keyboards/handwired/pilcrow/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT pilcrow +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B4, F7, B1, B3 } +#define MATRIX_COL_PINS { D4, C6, D7, E6, F5, F6, B6, B2, F4, B5} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/pilcrow/keymaps/default/Makefile b/keyboards/handwired/pilcrow/keymaps/default/Makefile new file mode 100644 index 000000000000..f4671a9d113c --- /dev/null +++ b/keyboards/handwired/pilcrow/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/pilcrow/keymaps/default/config.h b/keyboards/handwired/pilcrow/keymaps/default/config.h new file mode 100644 index 000000000000..df06a2620627 --- /dev/null +++ b/keyboards/handwired/pilcrow/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/handwired/pilcrow/keymaps/default/keymap.c b/keyboards/handwired/pilcrow/keymaps/default/keymap.c new file mode 100644 index 000000000000..e382e4c6ad11 --- /dev/null +++ b/keyboards/handwired/pilcrow/keymaps/default/keymap.c @@ -0,0 +1,88 @@ +#include "pilcrow.h" +#define _______ KC_TRNS +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ + KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[1] = KEYMAP( \ + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \ + _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \ +), +[2] = KEYMAP( \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ + KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ + OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \ + _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[3] = KEYMAP( \ + RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \ + KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \ + RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \ + _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \ +) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} \ No newline at end of file diff --git a/keyboards/handwired/pilcrow/keymaps/default/readme.md b/keyboards/handwired/pilcrow/keymaps/default/readme.md new file mode 100644 index 000000000000..95472dfca89e --- /dev/null +++ b/keyboards/handwired/pilcrow/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for pilcrow \ No newline at end of file diff --git a/keyboards/handwired/pilcrow/pilcrow.c b/keyboards/handwired/pilcrow/pilcrow.c new file mode 100644 index 000000000000..c8243df7bff4 --- /dev/null +++ b/keyboards/handwired/pilcrow/pilcrow.c @@ -0,0 +1,28 @@ +#include "pilcrow.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/handwired/pilcrow/pilcrow.h b/keyboards/handwired/pilcrow/pilcrow.h new file mode 100644 index 000000000000..7138ccb3f62b --- /dev/null +++ b/keyboards/handwired/pilcrow/pilcrow.h @@ -0,0 +1,23 @@ +#ifndef PILCROW_H +#define PILCROW_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \ +} + +#endif diff --git a/keyboards/handwired/pilcrow/readme.md b/keyboards/handwired/pilcrow/readme.md new file mode 100644 index 000000000000..7a7f6d2af582 --- /dev/null +++ b/keyboards/handwired/pilcrow/readme.md @@ -0,0 +1,28 @@ +pilcrow keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|] +``` + +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk new file mode 100644 index 000000000000..55898147dd35 --- /dev/null +++ b/keyboards/handwired/pilcrow/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index 473af67d34d6..23fbfd0b9a56 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -20,13 +20,19 @@ along with this program. If not, see . #include "config_common.h" +#define USB_VENDOR_ID_LENOVO 0x17ef +#define USB_DEVICE_ID_LENOVO_TPKBD 0x6009 +#define USB_DEVICE_ID_LENOVO_CUSBKBD 0x6047 +#define USB_DEVICE_ID_LENOVO_CBTKBD 0x6048 +#define USB_DEVICE_ID_LENOVO_TPPRODOCK 0x6067 + /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6660 +#define VENDOR_ID USB_VENDOR_ID_LENOVO +#define PRODUCT_ID USB_DEVICE_ID_LENOVO_CBTKBD #define DEVICE_VER 0x0001 #define MANUFACTURER Priyadi #define PRODUCT Promethium Keyboard -#define DESCRIPTION Promethium Keyboard +#define DESCRIPTION /* key matrix size */ #define MATRIX_ROWS 8 diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c index bf797a7491b5..7ae269563f8c 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c +++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c @@ -425,7 +425,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_QWERTY] = KEYMAP( KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT , + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT , KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL ), @@ -442,10 +442,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_COLEMAK] = KEYMAP( - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT , - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL + _______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, _______, + _______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, _______, + _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* Workman @@ -460,10 +460,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_WORKMAN] = KEYMAP( - KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_ENT , - KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL + _______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, _______, + _______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, _______, + _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* Punc @@ -551,7 +551,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_GUI] = KEYMAP( _______, LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0), _______, - LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,_______, QWERTY, + LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,KC_PAUS, QWERTY, WIN, _______, KC_MPRV, KC_MPLY, KC_MNXT, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, COLEMAK, OSX, _______, _______, _______, _______, BL_DEC, BL_INC, _______, _______, RGB_VAI, RGB_VAD, WORKMAN ), @@ -582,6 +582,39 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #endif switch (keycode) { + // QWERTZ style comma and dot: semicolon and colon when shifted + case KC_COMM: + if (record->event.pressed) { + bool lshifted = keyboard_report->mods & MOD_BIT(KC_LSFT); + bool rshifted = keyboard_report->mods & MOD_BIT(KC_RSFT); + if (lshifted || rshifted) { + if (lshifted) unregister_code(KC_LSFT); + if (rshifted) unregister_code(KC_RSFT); + register_code(KC_SCLN); + unregister_code(KC_SCLN); + if (lshifted) register_code(KC_LSFT); + if (rshifted) register_code(KC_RSFT); + } else { + register_code(KC_COMM); + unregister_code(KC_COMM); + } + } + return false; + break; + case KC_DOT: + if (record->event.pressed) { + if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT))) { + register_code(KC_SCLN); + unregister_code(KC_SCLN); + } else { + register_code(KC_DOT); + unregister_code(KC_DOT); + } + } + return false; + break; + + // layout switchers case QWERTY: if (record->event.pressed) { #ifdef AUDIO_ENABLE @@ -610,8 +643,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; break; - - + // layer switcher case PUNC: if (record->event.pressed) { layer_on(_PUNC); @@ -673,7 +705,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; break; - + // OS switchers case LINUX: set_unicode_input_mode(UC_LNX); #ifdef AUDIO_ENABLE @@ -736,106 +768,36 @@ void shutdown_user() void ps2_mouse_init_user() { + uint8_t rcv; + // set TrackPoint sensitivity PS2_MOUSE_SEND(0xE2, "set trackpoint sensitivity: 0xE2"); PS2_MOUSE_SEND(0x81, "set trackpoint sensitivity: 0x81"); PS2_MOUSE_SEND(0x4A, "set trackpoint sensitivity: 0x4A"); - PS2_MOUSE_SEND(0x60, "set trackpoint sensitivity: 0x60"); + PS2_MOUSE_SEND(0x49, "set trackpoint sensitivity: 0x59"); + + // set TrackPoint Negative Inertia factor + PS2_MOUSE_SEND(0xE2, "set negative inertia factor: 0xE2"); + PS2_MOUSE_SEND(0x81, "set negative inertia factor: 0x81"); + PS2_MOUSE_SEND(0x4D, "set negative inertia factor: 0x4D"); + PS2_MOUSE_SEND(0x06, "set negative inertia factor: 0x06"); // set TrackPoint speed // (transfer function upper plateau speed) PS2_MOUSE_SEND(0xE2, "set trackpoint speed: 0xE2"); PS2_MOUSE_SEND(0x81, "set trackpoint speed: 0x81"); PS2_MOUSE_SEND(0x60, "set trackpoint speed: 0x60"); - PS2_MOUSE_SEND(0x90, "set trackpoint speed: 0x90"); + PS2_MOUSE_SEND(0x61, "set trackpoint speed: 0x61"); - // set TrackPoint Negative Inertia factor - PS2_MOUSE_SEND(0xE2, "set negative inertia factor: 0xE2"); - PS2_MOUSE_SEND(0x81, "set negative inertia factor: 0x81"); - PS2_MOUSE_SEND(0x4D, "set negative inertia factor: 0x4D"); - PS2_MOUSE_SEND(0x03, "set negative inertia factor: 0x03"); - - // disable up threshold (click) - PS2_MOUSE_SEND(0xE2, "set disable up threshold: 0xE2"); - PS2_MOUSE_SEND(0x47, "set disable up threshold: 0x47"); - PS2_MOUSE_SEND(0x2C, "set disable up threshold: 0x2C"); - PS2_MOUSE_SEND(0x01, "set disable up threshold: 0x01"); - - // enable TrackPoint Press to Select (PtS) - // print("ps2_mouse_init: send 0xE2: "); - // rcv = ps2_host_send(0xE2); - // phex(rcv); phex(ps2_error); print("\n"); - // print("ps2_mouse_init: send 0x47: "); - // rcv = ps2_host_send(0x47); - // phex(rcv); phex(ps2_error); print("\n"); - // print("ps2_mouse_init: send 0x2C: "); - // rcv = ps2_host_send(0x2C); - // phex(rcv); phex(ps2_error); print("\n"); - // print("ps2_mouse_init: send 0x00: "); - // rcv = ps2_host_send(0x00); - // phex(rcv); phex(ps2_error); print("\n"); - - // set TrackPoint Press to Select threshold - // print("ps2_mouse_init: send 0xE2: "); - // rcv = ps2_host_send(0xE2); - // phex(rcv); phex(ps2_error); print("\n"); - // print("ps2_mouse_init: send 0x81: "); - // rcv = ps2_host_send(0x81); - // phex(rcv); phex(ps2_error); print("\n"); - // print("ps2_mouse_init: send 0x5C: "); - // rcv = ps2_host_send(0x5C); - // phex(rcv); phex(ps2_error); print("\n"); - // // default PtS threshold is 0x08 - // print("ps2_mouse_init: send 0x04: "); - // rcv = ps2_host_send(0x04); - // phex(rcv); phex(ps2_error); print("\n"); - - // set TrackPoint Press to Select time constant (zTc) - // print("ps2_mouse_init: send 0xE2: "); - // rcv = ps2_host_send(0xE2); - // phex(rcv); phex(ps2_error); print("\n"); - // print("ps2_mouse_init: send 0x81: "); - // rcv = ps2_host_send(0x81); - // phex(rcv); phex(ps2_error); print("\n"); - // print("ps2_mouse_init: send 0x5E: "); - // rcv = ps2_host_send(0x5E); - // phex(rcv); phex(ps2_error); print("\n"); - // // default zTc is 0x26 - // print("ps2_mouse_init: send 0x45: "); - // rcv = ps2_host_send(0x45); - // phex(rcv); phex(ps2_error); print("\n"); - - /* - // set TrackPoint Press to Select Jenks Curvature (jkcur) - print("ps2_mouse_init: send 0xE2: "); - rcv = ps2_host_send(0xE2); - phex(rcv); phex(ps2_error); print("\n"); - print("ps2_mouse_init: send 0x81: "); - rcv = ps2_host_send(0x81); - phex(rcv); phex(ps2_error); print("\n"); - print("ps2_mouse_init: send 0x5D: "); - rcv = ps2_host_send(0x5D); - phex(rcv); phex(ps2_error); print("\n"); - // default jkcur is 0x87 - print("ps2_mouse_init: send 0x87: "); - rcv = ps2_host_send(0x87); - phex(rcv); phex(ps2_error); print("\n"); - */ - - /* - // set TrackPoint Minimum Drag (mindrag) - print("ps2_mouse_init: send 0xE2: "); + // inquire pts status rcv = ps2_host_send(0xE2); - phex(rcv); phex(ps2_error); print("\n"); - print("ps2_mouse_init: send 0x81: "); - rcv = ps2_host_send(0x81); - phex(rcv); phex(ps2_error); print("\n"); - print("ps2_mouse_init: send 0x59: "); - rcv = ps2_host_send(0x59); - phex(rcv); phex(ps2_error); print("\n"); - // default PtS mindrag is 0x14 - print("ps2_mouse_init: send 0x14: "); - rcv = ps2_host_send(0x14); - phex(rcv); phex(ps2_error); print("\n"); - */ + rcv = ps2_host_send(0x2C); + rcv = ps2_host_recv_response(); + if ((rcv & 1) == 1) { + // if on, disable pts + rcv = ps2_host_send(0xE2); + rcv = ps2_host_send(0x47); + rcv = ps2_host_send(0x2C); + rcv = ps2_host_send(0x01); + } } \ No newline at end of file diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index 891f523c22a2..465ef3359a2f 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -1,4 +1,3 @@ - # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -66,6 +65,8 @@ BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. PS2_MOUSE_ENABLE ?= yes PS2_USE_INT ?= yes +ADAFRUIT_BLE_ENABLE ?= yes +API_SYSEX_ENABLE ?= no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend diff --git a/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c b/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c index 5d7c7f38a38d..123c53a6de7f 100644 --- a/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c +++ b/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c @@ -48,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------------. * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | * |-----------------------------------------------------------------------------------------+ - * | | Led | Led-| Led+| | | | | Psc | Slck| Paus| Up | | | + * | CAPS | Led | Led-| Led+| | | | | Psc | Slck| Paus| Up | | | * |-----------------------------------------------------------------------------------------+ * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | * |-----------------------------------------------------------------------------------------+ @@ -59,7 +59,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_FN] = KEYMAP( /* Layer 1 */ ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \ - ______, S_LED, S_LEDI, S_LEDD, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ + KC_CAPS, S_LED, S_LEDI, S_LEDD, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS,KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______, ______, \ ______, ______, KC_MPRV, KC_MPLY, KC_MNXT,______,______,KC_PPLS,KC_PMNS,KC_END, KC_PGDN, KC_DOWN, ______,______, \ ______, ______, ______, ______, KC_DEL, KC_MSTP, ______, ______, ______ \ diff --git a/keyboards/lets_split/imgs/letssplitv2.svg b/keyboards/lets_split/imgs/letssplitv2.svg index ce80db7269a0..f2cb9ce1e35a 100644 --- a/keyboards/lets_split/imgs/letssplitv2.svg +++ b/keyboards/lets_split/imgs/letssplitv2.svg @@ -549,9 +549,9 @@ bordercolor="#666666" pagecolor="#ffffff" id="base" - inkscape:zoom="1.1519406" - inkscape:cx="274.80199" - inkscape:cy="339.22443" + inkscape:zoom="0.66928853" + inkscape:cx="198.17365" + inkscape:cy="416.82194" inkscape:window-x="0" inkscape:window-y="0" inkscape:current-layer="g21-5" @@ -3961,8 +3961,8 @@ style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none" /> \ No newline at end of file diff --git a/keyboards/planck/keymaps/priyadi/keymap.c b/keyboards/planck/keymaps/priyadi/keymap.c index 6e7f4e73551e..f0dafebf3f82 100644 --- a/keyboards/planck/keymaps/priyadi/keymap.c +++ b/keyboards/planck/keymaps/priyadi/keymap.c @@ -179,7 +179,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_QWERTY] = { {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT }, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT }, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, {KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL} }, @@ -196,10 +196,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_COLEMAK] = { - {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, - {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, - {KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL} + {_______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, _______}, + {_______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, _______}, + {_______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, /* Workman @@ -214,10 +214,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_WORKMAN] = { - {KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC}, - {KC_ESC, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_ENT }, - {KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, - {KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL} + {_______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, _______}, + {_______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, _______}, + {_______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, /* Punc @@ -322,6 +322,7 @@ float tone_linux[][2] = SONG(CAPS_LOCK_ON_SOUND); float tone_windows[][2] = SONG(SCROLL_LOCK_ON_SOUND); float tone_osx[][2] = SONG(NUM_LOCK_ON_SOUND); float tone_click[][2] = SONG(MUSICAL_NOTE(_F3, 2)); +float tone_release[][2] = SONG(MUSICAL_NOTE(_A3, 2)); #endif void persistant_default_layer_set(uint16_t default_layer) { @@ -331,9 +332,49 @@ void persistant_default_layer_set(uint16_t default_layer) { bool process_record_user(uint16_t keycode, keyrecord_t *record) { // faux clicky - if (record->event.pressed) PLAY_NOTE_ARRAY(tone_click, false, 0); + // if (record->event.pressed) PLAY_NOTE_ARRAY(tone_click, false, 0); + #ifdef AUDIO_ENABLE + if (record->event.pressed) { + PLAY_NOTE_ARRAY(tone_click, false, 0); + } else { + PLAY_NOTE_ARRAY(tone_release, false, 0); + } + #endif switch (keycode) { + // QWERTZ style comma and dot: semicolon and colon when shifted + case KC_COMM: + if (record->event.pressed) { + bool lshifted = keyboard_report->mods & MOD_BIT(KC_LSFT); + bool rshifted = keyboard_report->mods & MOD_BIT(KC_RSFT); + if (lshifted || rshifted) { + if (lshifted) unregister_code(KC_LSFT); + if (rshifted) unregister_code(KC_RSFT); + register_code(KC_SCLN); + unregister_code(KC_SCLN); + if (lshifted) register_code(KC_LSFT); + if (rshifted) register_code(KC_RSFT); + } else { + register_code(KC_COMM); + unregister_code(KC_COMM); + } + } + return false; + break; + case KC_DOT: + if (record->event.pressed) { + if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT))) { + register_code(KC_SCLN); + unregister_code(KC_SCLN); + } else { + register_code(KC_DOT); + unregister_code(KC_DOT); + } + } + return false; + break; + + // layout switcher case QWERTY: if (record->event.pressed) { #ifdef AUDIO_ENABLE @@ -361,6 +402,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; + + // layer switchers case PUNC: if (record->event.pressed) { layer_on(_PUNC); @@ -397,6 +440,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; + + // OS switchers case LINUX: set_unicode_input_mode(UC_LNX); #ifdef AUDIO_ENABLE diff --git a/keyboards/planck/keymaps/sgoodwin/Makefile b/keyboards/planck/keymaps/sgoodwin/Makefile index b2ca419445f9..9081c6d3ec81 100644 --- a/keyboards/planck/keymaps/sgoodwin/Makefile +++ b/keyboards/planck/keymaps/sgoodwin/Makefile @@ -19,6 +19,7 @@ AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +API_SYSEX_ENABLE = no # Disable extra stuff for ergodoxen # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xd60/Makefile b/keyboards/xd60/Makefile new file mode 100644 index 000000000000..57b2ef62e5f3 --- /dev/null +++ b/keyboards/xd60/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/xd60/arrow-cluster.JPG b/keyboards/xd60/arrow-cluster.JPG new file mode 100644 index 000000000000..aa03dc08edc3 Binary files /dev/null and b/keyboards/xd60/arrow-cluster.JPG differ diff --git a/keyboards/xd60/config.h b/keyboards/xd60/config.h new file mode 100644 index 000000000000..13ae29063ed7 --- /dev/null +++ b/keyboards/xd60/config.h @@ -0,0 +1,68 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER XIUDI +#define PRODUCT XD60 +#define DESCRIPTION XD60 Keyboard by XIUDI + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif diff --git a/keyboards/xd60/keymaps/default/keymap.c b/keyboards/xd60/keymaps/default/keymap.c new file mode 100644 index 000000000000..ea85c02a3980 --- /dev/null +++ b/keyboards/xd60/keymaps/default/keymap.c @@ -0,0 +1,64 @@ +#include "xd60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // 0: Base Layer + KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT), + + // 1: Function Layer + KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ + KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ + KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_NO, KC_APP, BL_TOGG,BL_DEC, BL_INC, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, KC_NO, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, F(0), KC_HOME, KC_PGDOWN,KC_END), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + // MACRODOWN only works in this function + + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + + // Layer LED indicators + uint32_t layer = layer_state; + + if (layer & (1<<1)) { + xd60_esc_led_on(); + } else { + xd60_esc_led_off(); + } + + /* + if (layer & (1<<2)) { + xd60_poker_leds_on(); + xd60_esc_led_on(); + } else { + xd60_poker_leds_off(); + xd60_esc_led_off(); + } + */ +}; diff --git a/keyboards/xd60/keymaps/default/readme.md b/keyboards/xd60/keymaps/default/readme.md new file mode 100644 index 000000000000..d2a87bd722e5 --- /dev/null +++ b/keyboards/xd60/keymaps/default/readme.md @@ -0,0 +1,9 @@ +# Default Keymap for XIUDI's 60% XD60 PCB + +![Default Keymap for XD60](https://img.alicdn.com/imgextra/i1/1713761720/TB2K0gTalPxQeBjy1XcXXXHzVXa_!!1713761720.png) + +## Additional Notes +Default Keymap for XD60 as indicated on the original sale page. + +## Build +To build the default keymap, simply run `make xd60-default`. diff --git a/keyboards/xd60/keymaps/stanleylai/keymap.c b/keyboards/xd60/keymaps/stanleylai/keymap.c new file mode 100644 index 000000000000..a84ee0f898c9 --- /dev/null +++ b/keyboards/xd60/keymaps/stanleylai/keymap.c @@ -0,0 +1,60 @@ +#include "xd60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // 0: Base Layer + KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT), + + // 1: Function Layer + KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ + KC_CAPS, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP, BL_TOGG, KC_DEL, \ + F(0), KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, KC_PGUP, KC_INS, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_MPLY, KC_RGUI, KC_RALT, KC_HOME, KC_PGDOWN,KC_END), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + // MACRODOWN only works in this function + + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + + // Layer LED indicators + uint32_t layer = layer_state; + + if (layer & (1<<1)) { + xd60_wasd_leds_on(); + xd60_fn_led_on(); + xd60_esc_led_on(); + xd60_poker_leds_on(); + } else { + xd60_wasd_leds_off(); + xd60_fn_led_off(); + xd60_esc_led_off(); + xd60_poker_leds_off(); + } +}; diff --git a/keyboards/xd60/readme.md b/keyboards/xd60/readme.md new file mode 100644 index 000000000000..393ea5d683bf --- /dev/null +++ b/keyboards/xd60/readme.md @@ -0,0 +1,13 @@ +# QMK Firmware for XIUDI's 60% XD60 PCB + +![Top View of XD60 Keyboard, with DSA Dolch keycaps](./top-view.JPG) +![Angled View of XD60 Keyboard Arrow Cluster, with DSA Dolch keycaps](./arrow-cluster.JPG) + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Additional Notes +The XD60 is essentially a GH60 rev. C, with support for a right-hand arrow cluster. Includes full compatibility with GH60 expansion boards. Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting. Default keymap included, matching configuration on sale page. + +## Build +To build the default keymap, simply run `make xd60-default`. diff --git a/keyboards/xd60/rules.mk b/keyboards/xd60/rules.mk new file mode 100644 index 000000000000..e0b92121d2ac --- /dev/null +++ b/keyboards/xd60/rules.mk @@ -0,0 +1,65 @@ +# MCU name +# MCU = at90usb1287 +MCU = atmega32u4 + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# LUFA specific +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xd60/top-view.JPG b/keyboards/xd60/top-view.JPG new file mode 100644 index 000000000000..613759b4d28c Binary files /dev/null and b/keyboards/xd60/top-view.JPG differ diff --git a/keyboards/xd60/xd60.c b/keyboards/xd60/xd60.c new file mode 100644 index 000000000000..4307f5f59319 --- /dev/null +++ b/keyboards/xd60/xd60.c @@ -0,0 +1,25 @@ +#include "xd60.h" + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + if (usb_led & (1<