Now available through pypi/pip!
To install:
pip install jellyfishlights-py
- Connect to a local JellyFish Lighting controller over websocket
- Retrieve the following data:
- Controller's name, hostname, and firmware version
- Timezone configuration
- Zone configuration
- Preset patterns and their configurations
- Zone states
- Calendar schedule
- Daily schedule
- Turn zones on and off
- Activate a preset pattern
- Set lights to a solid color with brightness control
- Set any individual lights you want with brightness control
- Activate a custom pattern configuration
- Create, update, and delete custom pattern configurations
- Create, update, and delete schedule events (calendar and daily)
- Create, update, and delete zone configurations
- Set the controller's name
The snippets below show most of what this module can do and have important usage notes in the comments.
from jellyfishlightspy import JellyFishController, ScheduleEvent, ScheduleEventAction, ZoneConfig, PortMapping
import logging
# Debug logging exposes the JSON messages sent to and received from the controller
logging.basicConfig(level = logging.DEBUG)
# Create a controller object and connect
jfc = JellyFishController('192.168.0.245') # hostname also works
jfc.connect()
# Print the controller's name and hostname
print(f"Connected to JellyFish Lighting controller '{jfc.name}' ({jfc.hostname})")
# Print the controller's firmware version information
print(f"Firmware version: {jfc.firmware_version}")
# Print the controller's timezone configuration
print(f"Timezone configuration: {jfc.time_config}")
# Change the controller's user-defined name
jfc.set_name("My JellyFish Controller")
# Disconnect from the controller
jfc.disconnect()# Create callbacks to respond to various events
def on_open()
print("Connected!")
def on_close(status, message)
print("Disconnected (status: %s, message: %s)", status, message)
def on_message(data)
print("Recieved push data: %s", data)
def on_error(error)
print("Error encountered: %s", error)
# Register your callbacks
jfc.add_listener(on_open, on_close, on_message, on_error)# Print the currently configured zones
# NOTE: all attributes on the controller will return cached data when available.
# Cached data is automatically updated via push events, but if you want to ensure
# you are retrieving the latest information from the controller, use the corresponding
# get_* function (jfc.get_zone_names() in this case)
print(f"Zones: {jfc.zone_names}")
# Print the current state of all zones
for name, state in jfc.get_zone_states().items():
pattern = state.file
brightness = state.data.runData.brightness
colors = state.data.colors
print(f"Zone '{name}' is {'on' if state.is_on else 'off'} (pattern: '{pattern}', colors: {colors}, brightness: {brightness})")
# Turn off all zones
# NOTE: Many commands have an optional zones parameter. If not filled, it defaults to all zones
# NOTE: Many of the commands have an optional sync parameter.
# If sync=False (default is True) it sends the command and does not wait for a response (returns immediately)
jfc.turn_off(sync=False)
# Turn on the 'front-zone' zone - the lights will be in the same state as when they were last on
# NOTE: Many of the commands have an optional timeout parameter.
# If sync=True (it is by default), the command is synchronous and will raise a JellyFishException
# if a response isn't received within the timeout period (default is 10 seconds).
jfc.turn_on(["front-zone"], timeout=5)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# !!ADVANCED!! - change zone configurations
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
orig_zones = jfc.zone_configs
# Print current zone configurations
for zone, config in orig_zones.items():
print(f"Zone '{zone}' config: {config}")
# Add a new zone
new_config = ZoneConfig([
# NOTE: the phyPort attribute maps as such to the ports on the controller (controller port->phyPort): 1->1, 2->2, 3->4, 4->8
# NOTE: zoneRGBStartIdx defaults to phyStartIdx. Setting it to the phyEndIdx value will reverse the direction
# NOTE: ctlrName defaults to the hostname of the controller you are currently connected to (jfc.hostname)
# NOTE: All of the *Idx values are one less than what is displayed in the app! (e.g. a "1" value in the app is a "0" value here)
PortMapping(phyPort=1, phyStartIdx=0, phyEndIdx=10, zoneRGBStartIdx=10, ctlrName="JellyFish-XXXX.local"),
# NOTE: this is the short version that sets only the required fields: phyPort, phyStartIdx, and phyEndIdx
PortMapping(2, 0, 99)
])
jfc.add_zone("My new zone", new_config)
# Delete the zone we just created
jfc.delete_zone("My new zone")
# Save the full set of all zone configurations at once
jfc.set_zone_configs({"My new zone": new_config}) # This would result in a single zone (any other zones would be deleted)
jfc.set_zone_configs({}) # This would delete all zone configurations
jfc.set_zone_configs(orig_zones) # This would restore the zone configurations to what we retrieved above (before we modified them)# Print the list of currently configured patterns
print(f"Patterns: {jfc.pattern_names}")
# Run a preset pattern on all zones
jfc.apply_pattern("Special Effects/Red Waves")
# Retrieve a pattern configuration
config = jfc.get_pattern_config("Colors/Blue")
print(config)
# Customize the pattern configuration and run it on the 'front-zone' zone
# (this example shows just a few of the configurable pattern attributes)
config.colors.extend([0, 0, 0]) # Note that 'colors' is a list of ints, not a list of tuples! Be sure the list is divisible by 3
config.type = "Chase" # Valid values: ["Color", "Chase", "Paint", "Stacker", "Sequence", "Multi-Paint", "Soffit"]
config.direction = "Center" # Valid values: ["Left", "Center", "Right"]
config.spaceBetweenPixels = 8
config.effectBetweenPixels = "Progression" # Valid values: ["No Color Transform", "Repeat", "Progression", "Fade", "Fill with Black"]
config.runData.speed = 1
config.runData.effect = "No Effect" # Valid values: ["No Effect", "Twinkle", "Lightning"]
jfc.apply_pattern_config(config, ["front-zone"])
# Save your new pattern to a file to easily run later.
# The parent folder will be created if it doesn't exist.
# You can also update existing patterns this way (if they're editable).
jfc.save_pattern("Special Effects/Blue Waves", config)
# Delete the pattern
jfc.delete_pattern("Special Effects/Blue Waves")# Set 'front-zone' and 'back-zone' to a solid color (white @ 100% brightness in this case)
jfc.apply_color((255, 255, 255), 100, ["front-zone", "back-zone"])
# Set individual lights on the 'porch-zone' zone
# This example sets only the first 3 lights in the zone, but you can set as many as you would like
lights = [
(255, 0, 0), # Red
(0, 255, 0), # Green
(0, 0, 255) # Blue
]
jfc.apply_light_string(lights, 75, ["porch-zone"]) # 75% brightness# Retrieve the calendar schedule
orig_events = jfc.calendar_schedule # Use jfc.daily_schedule to get the daily schedule
for event in orig_events:
print(event)
# Add an event to the schedule
event = ScheduleEvent(
# Must be in YYYYMMDD format for calendar events
# Even though a year must be specified the event will run annually
# You must include each individual day if specifying a range
days = ["20231231", "20230101", "20230102"],
# days = ["M", "T", "W", "TH", "F", "SA", "S"], <-- Example for a daily schedule event
actions = [
ScheduleEventAction(
type = "RUN",
startFrom = "sunset",
hour = 0, # For 'sunrise' and 'sunset', hour must be 0...
minute = 30, # ...and the minute offset must be between -55 and 55 and divisible by 5
patternFile = "Special Effects/Rainbow Waves",
zones = jfc.zone_names # The list of zones for each RUN/STOP action must match!
),
# For 'time', the hour must be between 0 and 23, and minute between 0 and 59
ScheduleEventAction("STOP", "time", 5, 00, "", jfc.zone_names)
]
)
jfc.add_calendar_event(event)
# To remove events you must send the updated full schedule of events
jfc.set_calendar_schedule([event]) # This would delete all events other than what we just created
jfc.set_calendar_schedule([]) # This would delete all events
jfc.set_calendar_schedule(orig_events) # This would restore the schedule to what we retrieved above (before we modified it)Contributions are welcome! To run the test suite, first set the JF_TEST_HOST environment variable to your local JellyFish Lighting controller's address. Then run:
python -m pytest ./tests
If you don't have a local controller to test with you can skip the integration tests by running:
python -m pytest ./tests/unit