Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
	arch/arm/mach-versatile/core.c
	sound/soc/pxa/pxa2xx-ac97.c
	sound/soc/pxa/pxa2xx-i2s.c
manually.

Documentation/sound/alsa/soc/dapm.txt

@@ -135,11 +135,7 @@ when the Mic is inserted:-
 
 static int spitz_mic_bias(struct snd_soc_dapm_widget* w, int event)
 {
-	if(SND_SOC_DAPM_EVENT_ON(event))
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
-	else
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
-
+	gpio_set_value(SPITZ_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
 	return 0;
 }
 
@@ -269,11 +265,7 @@ powered only when the spk is in use.
 /* turn speaker amplifier on/off depending on use */
 static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
 {
-	if (SND_SOC_DAPM_EVENT_ON(event))
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
-	else
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
-
+	gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
 	return 0;
 }
 

MAINTAINERS

@@ -466,6 +466,12 @@ M:	[email protected]
 L:	[email protected] (subscribers-only)
 S:	Maintained
 
+ARM/AFEB9260 MACHINE SUPPORT
+P:	Sergey Lapin
+M:	[email protected]
+L:	[email protected] (subscribers-only)
+S:	Maintained
+
 ARM/AJECO 1ARM MACHINE SUPPORT
 P:	Lennert Buytenhek
 M:	[email protected]
@@ -491,7 +497,7 @@ M:	[email protected]
 L:	[email protected] (subscribers-only)
 S:	Maintained
 
-ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
+ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
 P:	Mike Rapoport
 M:	[email protected]
 L:	[email protected] (subscribers-only)
@@ -623,6 +629,12 @@ M:	[email protected]
 W:	http://hackndev.com
 S:	Maintained
 
+ARM/PALMZ72 SUPPORT
+P:     Sergey Lapin
+M:     [email protected]
+W:     http://hackndev.com
+S:     Maintained
+
 ARM/PLEB SUPPORT
 P:	Peter Chubb
 M:	[email protected]

arch/arm/Kconfig

@@ -148,7 +148,6 @@ config ARCH_MAY_HAVE_PC_FDC
 
 config ZONE_DMA
 	bool
-	default y
 
 config GENERIC_ISA_DMA
 	bool
@@ -178,6 +177,11 @@ config OPROFILE_MPCORE
 config OPROFILE_ARM11_CORE
 	bool
 
+config OPROFILE_ARMV7
+	def_bool y
+	depends on CPU_V7 && !SMP
+	bool
+
 endif
 
 config VECTORS_BASE
@@ -245,6 +249,7 @@ config ARCH_CLPS7500
 	select TIMER_ACORN
 	select ISA
 	select NO_IOPORT
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
@@ -306,6 +311,7 @@ config ARCH_IOP13XX
 	select PLAT_IOP
 	select PCI
 	select ARCH_SUPPORTS_MSI
+	select VMSPLIT_1G
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -350,6 +356,7 @@ config ARCH_IXP4XX
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ZONE_DMA if PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -434,7 +441,7 @@ config ARCH_ORION5X
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-	  Orion-2 (5281).
+	  Orion-2 (5281), Orion-1-90 (6183).
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
@@ -464,16 +471,15 @@ config ARCH_RPC
 	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select NO_IOPORT
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
 
 config ARCH_SA1100
 	bool "SA1100-based"
 	select ISA
-	select ARCH_DISCONTIGMEM_ENABLE
 	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_SELECT_MEMORY_MODEL
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select GENERIC_TIME
@@ -497,13 +503,16 @@ config ARCH_SHARK
 	bool "Shark"
 	select ISA
 	select ISA_DMA
+	select ZONE_DMA
 	select PCI
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
 
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
+	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
+	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	help
 	  Say Y here for systems based on one of the Sharp LH7A40X
 	  System on a Chip processors.  These CPUs include an ARM922T
@@ -515,7 +524,9 @@ config ARCH_DAVINCI
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select ZONE_DMA
 	help
 	  Support for TI's DaVinci platform.
 
@@ -734,6 +745,29 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+choice
+	prompt "Memory split"
+	default VMSPLIT_3G
+	help
+	  Select the desired split between kernel and user memory.
+
+	  If you are not absolutely sure what you are doing, leave this
+	  option alone!
+
+	config VMSPLIT_3G
+		bool "3G/1G user/kernel split"
+	config VMSPLIT_2G
+		bool "2G/2G user/kernel split"
+	config VMSPLIT_1G
+		bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+	hex
+	default 0x40000000 if VMSPLIT_1G
+	default 0x80000000 if VMSPLIT_2G
+	default 0xC0000000
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
@@ -815,20 +849,18 @@ config ARCH_FLATMEM_HAS_HOLES
 	default y
 	depends on FLATMEM
 
+# Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
-	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
 
 config ARCH_SPARSEMEM_ENABLE
 	bool
 
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool ARCH_SPARSEMEM_ENABLE
+
 config ARCH_SELECT_MEMORY_MODEL
-	bool
+	def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
 
 config NODES_SHIFT
 	int
@@ -845,7 +877,7 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+		   ARCH_AT91 || ARCH_DAVINCI || \
 		   ARCH_KS8695 || MACH_RD88F5182
 	help
 	  If you say Y here, the LEDs on your machine will be used
@@ -1005,9 +1037,9 @@ config ATAGS_PROC
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+menu "CPU Power Management"
 
-menu "CPU Frequency scaling"
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1047,10 +1079,12 @@ config CPU_FREQ_PXA
 	default y
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
-endmenu
-
 endif
 
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
 menu "Floating point emulation"
 
 comment "At least one emulation must be selected"
@@ -1202,6 +1236,8 @@ source "drivers/power/Kconfig"
 
 source "drivers/hwmon/Kconfig"
 
+source "drivers/thermal/Kconfig"
+
 source "drivers/watchdog/Kconfig"
 
 source "drivers/ssb/Kconfig"
@@ -1222,6 +1258,10 @@ source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"
 
+source "drivers/memstick/Kconfig"
+
+source "drivers/accessibility/Kconfig"
+
 source "drivers/leds/Kconfig"
 
 source "drivers/rtc/Kconfig"
@@ -1230,6 +1270,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/auxdisplay/Kconfig"
+
 source "drivers/regulator/Kconfig"
 
 source "drivers/uio/Kconfig"

arch/arm/Makefile

@@ -47,7 +47,7 @@ comma = ,
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a)
+arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
 arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7

arch/arm/boot/compressed/Makefile

@@ -76,7 +76,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 EXTRA_CFLAGS  := -fpic -fno-builtin
-EXTRA_AFLAGS  :=
+EXTRA_AFLAGS  := -Wa,-march=all
 
 # Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
 # linker symbols.  We only define initrd_phys and params_phys if the

arch/arm/boot/compressed/head.S

@@ -421,6 +421,7 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		add	r1, r1, #1048576
 		str	r1, [r0]
 		mov	pc, lr
+ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
 		mov	r12, lr
@@ -801,7 +802,7 @@ loop1:
 		add	r2, r2, #4		@ add 4 (line length offset)
 		ldr	r4, =0x3ff
 		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		.word	0xe16f5f14		@ clz r5, r4 - find bit position of way size increment
+		clz	r5, r4			@ find bit position of way size increment
 		ldr	r7, =0x7fff
 		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
 loop2:

arch/arm/common/Kconfig

@@ -12,7 +12,8 @@ config ICST307
 
 config SA1111
 	bool
-	select DMABOUNCE
+	select DMABOUNCE if !ARCH_PXA
+	select ZONE_DMA if !ARCH_PXA
 
 config DMABOUNCE
 	bool