motion.h

/*	motion.h
 *
 *	Include file for motion.c
 *      Copyright 2000 by Jeroen Vreeken (pe1rxq@amsat.org)
 *      This software is distributed under the GNU public license version 2
 *      See also the file 'COPYING'.
 *
 */

#ifndef _INCLUDE_MOTION_H
#define _INCLUDE_MOTION_H

#include "config.h"

/* Includes */
#ifdef HAVE_MYSQL
#include <mysql.h>
#endif

#include <stdio.h>
#include <stdlib.h>
#define __USE_GNU
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <time.h>
#include <signal.h>
#include <limits.h>
#include <errno.h>
#include <sys/time.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <sys/ioctl.h>
#include <sys/param.h>
#include <stdint.h>

#define _LINUX_TIME_H 1
#if (!defined(WITHOUT_V4L)) && (!defined(BSD))
#include <linux/videodev.h>
#endif

#include <pthread.h>

#ifdef HAVE_PGSQL
#include <libpq-fe.h>
#endif

#include "logger.h"
#include "conf.h"
#include "stream.h"
#include "webhttpd.h"

/**
 * ATTRIBUTE_UNUSED:
 *
 * Macro used to signal to GCC unused function parameters
 */
#ifdef __GNUC__
#ifdef HAVE_ANSIDECL_H
#include <ansidecl.h>
#endif
#ifndef ATTRIBUTE_UNUSED
#define ATTRIBUTE_UNUSED __attribute__((unused))
#endif
#else
#define ATTRIBUTE_UNUSED
#endif

/* The macro below defines a version of sleep using nanosleep
 * If a signal such as SIG_CHLD interrupts the sleep we just continue sleeping
 */
#define SLEEP(seconds, nanoseconds) {              \
                struct timespec tv;                \
                tv.tv_sec = (seconds);             \
                tv.tv_nsec = (nanoseconds);        \
                while (nanosleep(&tv, &tv) == -1); \
        } 


#if defined(WITHOUT_V4L) || defined(BSD)
 
#define VIDEO_PALETTE_GREY      1       /* Linear greyscale */
#define VIDEO_PALETTE_HI240     2       /* High 240 cube (BT848) */
#define VIDEO_PALETTE_RGB565    3       /* 565 16 bit RGB */
#define VIDEO_PALETTE_RGB24     4       /* 24bit RGB */
#define VIDEO_PALETTE_RGB32     5       /* 32bit RGB */
#define VIDEO_PALETTE_RGB555    6       /* 555 15bit RGB */
#define VIDEO_PALETTE_YUV422    7       /* YUV422 capture */
#define VIDEO_PALETTE_YUYV      8
#define VIDEO_PALETTE_UYVY      9       /* The great thing about standards is ... */
#define VIDEO_PALETTE_YUV420    10
#define VIDEO_PALETTE_YUV411    11      /* YUV411 capture */
#define VIDEO_PALETTE_RAW       12      /* RAW capture (BT848) */
#define VIDEO_PALETTE_YUV422P   13      /* YUV 4:2:2 Planar */
#define VIDEO_PALETTE_YUV411P   14      /* YUV 4:1:1 Planar */
#define VIDEO_PALETTE_YUV420P   15      /* YUV 4:2:0 Planar */
#define VIDEO_PALETTE_YUV410P   16      /* YUV 4:1:0 Planar */
#define VIDEO_PALETTE_PLANAR    13      /* start of planar entries */
#define VIDEO_PALETTE_COMPONENT 7       /* start of component entries */
#endif


/* Debug levels FIXME */
#define CAMERA_WARNINGS         3   /* warnings only */
#define TRACK_DEBUG             4   /* track debug */
#define CAMERA_INFO             5   /* info debug */
#define CAMERA_DEBUG            7   /* debug but not verbose */
#define CAMERA_VERBOSE          8   /* verbose level */
#define CAMERA_ALL              9   /* everything */


/* Default picture settings */
#define DEF_WIDTH              352
#define DEF_HEIGHT             288
#define DEF_QUALITY             75
#define DEF_CHANGES           1500

#define DEF_MAXFRAMERATE       100
#define DEF_NOISELEVEL          32

/* Minimum time between two 'actions' (email, sms, external) */
#define DEF_EVENT_GAP            60  /* 1 minutes */
#define DEF_MAXMOVIETIME       3600  /* 60 minutes */

#define DEF_FFMPEG_BPS      400000
#define DEF_FFMPEG_VBR           0
#define DEF_FFMPEG_CODEC   "mpeg4"

#define THRESHOLD_TUNE_LENGTH  256

#define MISSING_FRAMES_TIMEOUT  30  /* When failing to get picture frame from camera
                                     * we reuse the previous frame until
                                     * MISSING_FRAMES_TIMEOUT seconds has passed
                                     * and then we show a grey image instead
                                     */

#define WATCHDOG_TMO 30              /* 10 sec max motion_loop interval */
#define WATCHDOG_OFF -127            /* Turn off watchdog, used when we wants to quit a thread */

#define CONNECTION_KO "Lost connection"
#define CONNECTION_OK "Connection OK"

#define DEF_MAXSTREAMS          10   /* Maximum number of stream clients per camera */
#define DEF_MAXWEBQUEUE         10   /* Maximum number of stream client in queue */

#define DEF_TIMESTAMP      "%Y-%m-%d\\n%T"
#define DEF_EVENTSTAMP     "%Y%m%d%H%M%S"

#define DEF_SNAPPATH       "%v-%Y%m%d%H%M%S-snapshot"
#define DEF_IMAGEPATH      "%v-%Y%m%d%H%M%S-%q"
#define DEF_MOVIEPATH      "%v-%Y%m%d%H%M%S"
#define DEF_TIMEPATH       "%Y%m%d-timelapse"

#define DEF_TIMELAPSE_MODE "daily"

/* Do not break this line into two or more. Must be ONE line */
#define DEF_SQL_QUERY "sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')"


/* OUTPUT Image types */
#define IMAGE_TYPE_JPEG        0
#define IMAGE_TYPE_PPM         1

/* Filetype defines */
#define FTYPE_IMAGE            1
#define FTYPE_IMAGE_SNAPSHOT   2
#define FTYPE_IMAGE_MOTION     4
#define FTYPE_MPEG             8
#define FTYPE_MPEG_MOTION     16
#define FTYPE_MPEG_TIMELAPSE  32

#define FTYPE_MPEG_ANY    (FTYPE_MPEG | FTYPE_MPEG_MOTION | FTYPE_MPEG_TIMELAPSE)
#define FTYPE_IMAGE_ANY   (FTYPE_IMAGE | FTYPE_IMAGE_SNAPSHOT | FTYPE_IMAGE_MOTION)

/* What types of images files do we want to have */
#define NEWIMG_OFF       0
#define NEWIMG_ON        1
#define NEWIMG_FIRST     2
#define NEWIMG_BEST      4
#define NEWIMG_CENTER    8

#define LOCATE_OFF        0
#define LOCATE_ON         1
#define LOCATE_PREVIEW    2
#define LOCATE_REDBOX     3
#define LOCATE_CENTER     4 
#define LOCATE_REDCROSS   5 

#define LOCATE_NORMAL    0
#define LOCATE_BOTH      1

#define UPDATE_REF_FRAME 1
#define RESET_REF_FRAME  2

/* Forward declaration, used in track.h */
struct images;

#include "track.h"
#include "netcam.h"

/* Structure to hold images information
 * The idea is that this should have all information about a picture e.g. diffs, timestamp etc.
 * The exception is the label information, it uses a lot of memory
 * When the image is stored all texts motion marks etc. is written to the image
 * so we only have to send it out when/if we want.
 */
/* A image can have detected motion in it, but dosn't trigger an event, if we use minimum_motion_frames */
#define IMAGE_MOTION     1
#define IMAGE_TRIGGER    2
#define IMAGE_SAVE       4
#define IMAGE_SAVED      8
#define IMAGE_PRECAP    16
#define IMAGE_POSTCAP   32

struct image_data {
	unsigned char *image;
	int diffs;
	time_t timestamp;           /* Timestamp when image was captured */
	struct tm timestamp_tm;
	int shot;                   /* Sub second timestamp count */

	/* movement center to img center distance 
	 * Note Dist is calculated distX*distX + distY*distY */
	unsigned long cent_dist;

	unsigned int flags;         /* Se IMAGE_* defines */

	struct coord location;      /* coordinates for center and size of last motion detection*/

	int total_labels;
};

/* DIFFERENCES BETWEEN imgs.width, conf.width AND rotate_data.cap_width
 * (and the corresponding height values, of course)
 * ===========================================================================
 * Location      Purpose
 * 
 * conf          The values in conf reflect width and height set in the
 *               configuration file. These can be set via http remote control, 
 *               but they are not used internally by Motion, so it won't break
 *               anything. These values are transferred to imgs in vid_start.
 *
 * imgs          The values in imgs are the actual output dimensions. Normally
 *               the output dimensions are the same as the capture dimensions,
 *               but for 90 or 270 degrees rotation, they are not. E.g., if 
 *               you capture at 320x240, and rotate 90 degrees, the output
 *               dimensions are 240x320.
 *               These values are set from the conf values in vid_start, or 
 *               from the first JPEG image in netcam_start. For 90 or 270 
 *               degrees rotation, they are swapped in rotate_init.
 *
 * rotate_data   The values in rotate_data are named cap_width and cap_height,
 *               and contain the capture dimensions. The difference between
 *               capture and output dimensions is explained above.
 *               These values are set in rotate_init.
 */

/* date/time drawing, draw.c */
int draw_text (unsigned char *image, int startx, int starty, int width, const char *text, unsigned short int factor);
int initialize_chars(void);

struct images {
	struct image_data *image_ring;    /* The base address of the image ring buffer */
	int image_ring_size;
	int image_ring_in;                /* Index in image ring buffer we last added a image into */
	int image_ring_out;               /* Index in image ring buffer we want to process next time */

	unsigned char *ref;               /* The reference frame */
	unsigned char *out;               /* Picture buffer for motion images */
	int *ref_dyn;                     /* Dynamic objects to be excluded from reference frame */
	unsigned char *image_virgin;      /* Last picture frame with no text or locate overlay */
	struct image_data preview_image;  /* Picture buffer for best image when enables */
	unsigned char *mask;              /* Buffer for the mask file */
	unsigned char *smartmask;
	unsigned char *smartmask_final;
	unsigned char *common_buffer;
	int *smartmask_buffer;
	int *labels;
	int *labelsize;
	int width;
	int height;
	int type;
	int picture_type;                 /* Output picture type IMAGE_JPEG, IMAGE_PPM */		
	int size;
	int motionsize;
	int labelgroup_max;
	int labels_above;
	int labelsize_max;
	int largest_label;
};

/* Contains data for image rotation, see rotate.c. */
struct rotdata {
	/* Temporary buffer for 90 and 270 degrees rotation. */
	unsigned char *temp_buf;
	/* Degrees to rotate; copied from conf.rotate_deg. This is the value
	 * that is actually used. The value of conf.rotate_deg cannot be used
	 * because it can be changed by motion-control, and changing rotation
	 * while Motion is running just causes problems.
	 */
	int degrees;
	/* Capture width and height - different from output width and height if 
	 * rotating 90 or 270 degrees. */
	int cap_width;
	int cap_height;
};

/*
	these used to be global variables but now each thread will have its
	own context
 */
struct context {
	char conf_filename[PATH_MAX];
	int threadnr;
	unsigned short int daemon;
	char pid_file[PATH_MAX];

	struct config conf;
	struct images imgs;
	struct trackoptions track;
	struct netcam_context *netcam;
	struct image_data *current_image;        /* Pointer to a structure where the image, diffs etc is stored */
	unsigned short int new_img;

	int locate_motion;
	struct rotdata rotate_data;              /* rotation data is thread-specific */

	int noise;
	int threshold;
	int diffs_last[THRESHOLD_TUNE_LENGTH];
	int smartmask_speed;

	/* Commands to the motion thread */
	volatile unsigned short int snapshot;    /* Make a snapshot */
	volatile unsigned short int makemovie;   /* End a movie */
	volatile unsigned short int finish;      /* End the thread */
	volatile unsigned short int restart;     /* Restart the thread when it ends */
	/* Is the motion thread running */
	volatile unsigned short int running;
	volatile int watchdog;

	pthread_t thread_id;

	int event_nr;
	int prev_event;
	int lightswitch_framecounter;
	char text_event_string[PATH_MAX];        /* The text for conv. spec. %C -
                                                    we assume PATH_MAX normally 4096 characters is fine */
	int postcap;                             /* downcounter, frames left to to send post event */

	short int shots;
	unsigned short int detecting_motion;
	struct tm *currenttime_tm;
	struct tm *eventtime_tm;

	time_t currenttime;
	time_t lasttime;
	time_t eventtime;
	time_t connectionlosttime;               /* timestamp from connection lost */

	int lastrate;
	unsigned short int startup_frames;
	unsigned short int moved;
	unsigned short int pause;
	int missing_frame_counter;               /* counts failed attempts to fetch picture frame from camera */
	unsigned short int lost_connection;	

#if (defined(BSD))
	int tuner_dev;
#endif
	int video_dev;
	int pipe;
	int mpipe;

	struct stream stream;
	int stream_count;
	
#if defined(HAVE_MYSQL) || defined(HAVE_PGSQL)
	int sql_mask;
#endif

#ifdef HAVE_MYSQL
	MYSQL *database;
#endif

#ifdef HAVE_PGSQL
	PGconn *database_pg;
#endif

#ifdef HAVE_FFMPEG
	struct ffmpeg *ffmpeg_output;
	struct ffmpeg *ffmpeg_output_debug;
	struct ffmpeg *ffmpeg_timelapse;
	struct ffmpeg *ffmpeg_smartmask;
	char newfilename[PATH_MAX];
	char motionfilename[PATH_MAX];
	char timelapsefilename[PATH_MAX];
	short int movie_fps;
	short int movie_last_shot;
#endif
};

extern pthread_mutex_t global_lock;
extern volatile int threads_running;
extern unsigned short int debug_level;

/* TLS keys below */
extern pthread_key_t tls_key_threadnr; /* key for thread number */

int http_bindsock(int, int);
void * mymalloc(size_t);
void * myrealloc(void *, size_t, const char *);
FILE * myfopen(const char *, const char *);
size_t mystrftime(struct context *, char *, size_t, const char *, const struct tm *, const char *, int);
int create_path(const char *);
#endif /* _INCLUDE_MOTION_H */