SSCEP - Simple SCEP client for Unix
Copyright (c) Jarkko Turkulainen 2003. All rights reserved.
See the file COPYRIGHT for licensing information.
SSCEP is a client-only implementation of the SCEP (Cisco System's Simple Certificate Enrollment Protocol). SSCEP is designed for OpenBSD's isakmpd, but it will propably work with any Unix system with a recent compiler and OpenSSL toolkit libraries installed.
(From the Cisco Systems White Paper):
SCEP is a PKI communication protocol which leverages existing technology by using PKCS#7 and PKCS#10. SCEP is the evolution of the enrollment protocol developed by Verisign, Inc. for Cisco Systems, Inc. It now enjoys wide support in both client and CA implementations.
The goal of SCEP is to support the secure issuance of certificates to network devices in a scalable manner, using existing technology whenever possible. The protocol supports the following operations:
- CA and RA public key distribution
- Certificate enrollment
- Certificate and CRL query
Certificate and CRL access can be achieved by using the LDAP protocol, or by using the query messages defined in SCEP.
Currently, SSCEP implements all of the SCEP operations using SCEP query messages. There's no LDAP support, and probably there will never be (that's why it is simple).
SSCEP has been tested successfully against the following CA products:
- OpenSCEP server (getca, enroll and getcrl works)*
- Windows2000 server CA + Microsoft SCEP module (works)
- SSH Certifier (getca and enroll works)
- iPlanet CMS (getca and enroll works)*
- VeriSign Onsite (getca and enroll works)**
- Entrust VPN Connect (getca and enroll works)***
- OpenCA (getca, enroll, getcrl and automatic approval works)****
(*) by default, subjectAltName extensions are dropped from certificate
(**) only DNS subjectAltName allowed (demo mode)
(***) demo requires to use /C=US/O=Entrust
(****) automatic approval according to newer SCEP drafts requires OpenCA 0.9.2.4 or higher
The program should compile on OpenBSD system without problems. Uncompress the package and run command
$ make
Copy binary file sscep and configuration file sscep.conf to somewhere.
Running the command "sscep" without any arguments should give you a list of arguments and command line options.
$ ./sscep
sscep version 2005XXXX
Usage: ./sscep OPERATION [OPTIONS]
Available OPERATIONs are
getca Get CA/RA certificate(s)
enroll Enroll certificate
getcert Query certificate
getcrl Query CRL
General OPTIONS
-u <url> SCEP server URL
-p <host:port> Use proxy server at host:port
-f <file> Use configuration file
-c <file> CA certificate file (write if OPERATION is getca)
-E <name> PKCS#7 encryption algorithm (des|3des|blowfish)
-S <name> PKCS#7 signature algorithm (md5|sha1)
-v Verbose operation
-d Debug (even more verbose operation)
OPTIONS for OPERATION getca are
-i <string> CA identifier string
-F <name> Fingerprint algorithm (md5|sha1)
OPTIONS for OPERATION enroll are
-k <file> Private key file
-r <file> Certificate request file
-K <file> Signature private key file
-O <file> Signature certificate (used instead of self-signed)
-l <file> Write enrolled certificate in file
-e <file> Use different CA cert for encryption
-L <file> Write selfsigned certificate in file
-t <secs> Polling interval in seconds
-T <secs> Max polling time in seconds
-n <count> Max number of GetCertInitial requests
-R Resume interrupted enrollment
OPTIONS for OPERATION getcert are
-k <file> Private key file
-l <file> Local certificate file
-s <number> Certificate serial number (decimal)
-w <file> Write certificate in file
OPTIONS for OPERATION getcrl are
-k <file> Private key file
-l <file> Local certificate file
-w <file> Write CRL in file
SSCEP also supports configuration via a configuration file (-f). This is the recommended way to configure SSCEP and all the examples in below assume that you have done so.
All configuration options are key-value pairs separated with one or more space characters:
"Key" [spaces] "Value"
Quotation marks are optional - they are needed only if the value contains space characters (space or tab). Quotation marks inside the value string must be escaped using a backslash:
"Key" [spaces] "Value \"containing quotation marks\""
Comment lines (lines starting with '#') and empty lines are discarded.
Here are the available configuration file keys and example values:
Key Explanation
=====================================================================
CACertFile This is one is needed with all operations.
Example: ./ca.crt
Command line option: -c
CAIdentifier Some CAs require you to define this. Example: mydomain.com
Command line option: -i
CertReqFile Certificate request file created with mkrequest.
Example: ./local.csr
Command line option: -r
Debug Debug? Answer "yes" or "no".
Command line option: -d
EncAlgorithm PKCS#7 encryption algorithm. Available algorithms are des,
3des and blowfish. NOTE: this could be very misleading,
current SCEP draft provides no mechanism to "negotiate"
the algorithm - even if you send 3des, reply might be des
(same thing applies to SigAlgorithm).
Command line option: -E
EncCertFile If your CA/RA uses a different certificate for encyption
and signing, define this. CACertFile is used for verifying
the signature. Example: ./enc.crt
Command line option: -e
SignCertFile Instead of creating a self-signed certificate from the
new key pair use an already existing certficate/key to
sign the SCEP request. If the "old" certificate and
key is used, the CA can verify that the holder of the
private key for an existing certificate re-enrolls for
a renewal certificate, allowing for automatic approval
of the request. Requires specification of the corresponding
signature private key file (-K, SignKeyFile).
Example: ./sig.crt
Command line option: -O
SignKeyFile See SignCertFile. Specifies the corresponding private key.
Example: ./sig.key
Command line option: -K
FingerPrint Display fingerprint algorithm. Available algorithms are md5
and sha1. Default is md5.
Command line option: -F
GetCertFile Write certificate asquired via getcert operation.
Example: ./cert.crt
Command line option: -w
GetCertSerial Certificate serial number. Define this for getcert. The value
is defined as a decimal number. Example: 12
Command line option: -s
GetCrlFile Write CRL to file. Example: ./crl.crl
Command line option: -w
LocalCertFile Write successfully enrolled certificate. Example: ./local.crt
Command line option: -l
MaxPollCount Max number of GetCertInitial requests. Example: 50
Command line option: -n
MaxPollTime Max polling time in seconds. Example: 28800
Command line option: -T
PollInterval Poll periodically for pending certificate. Example: 60
Command line option: -t
PrivateKeyFile Private key created with mkrequest. Example: ./local.key
Command line option: -k
Proxy Use HTTP proxy at host:port. Example: localhost:8080
Command line option: -p
SelfSignedFile Write optionally the selfsigned certificate in file (needed
in SCEP transaction). Example: ./selfsigned.crt
Command line option: -L
SigAlgorithm PKCS#7 signature algorithm. Available algorithms are md5
and sha1. Default is md5.
Command line option: -E
URL URL of the SCEP server. Example:
http://localhost/cgi-bin/pkiclient.exe
Command line option: -u
Verbose Verbose? Answer "yes" or "no"
Command line option: -v
The actual enrollment is done with the following procedure:
-
CA server identification string If your SCEP server requires you to use a specific identification string in the initial CA certificate access (step 3), write it down.
-
CA server http URL You must know the complete url, with http:// and cgi-program path and everything. Example:
-
CA naming policy You need to know what kind of DN you request. Some may require you to use unstructuredName naming, some may require a CN with localityName, etc.
Before the enrollment can take place, sscep needs a private key file and the corresponding X.509 certificate request in PKCS#10 format. Edit the DN variables in the file mkrequest (it's a shell script) if you need. When ready, make the request:
$ mkrequest -ip 172.30.0.1
Generating RSA private key, 1024 bit long modulus
..............++++++
...++++++
e is 65537 (0x10001)
This writes key and request named local.key and local.csr (you can change the "local" with variable PREFIX in mkrequest).
If the CA supports automatic enrollment, you may supply the password in cert request:
$ mkrequest -ip 172.30.0.1 password
Configure the URL and CACertFile in configuration file (sscep.conf) and run the command
$ ./sscep getca -f sscep.conf
./sscep: requesting CA certificate
./sscep: valid response from server
./sscep: MD5 fingerprint: 1D:3C:4C:DF:99:73:B8:FB:B4:EE:C4:56:A9:7C:37:A3
./sscep: CA certificate written as ca.crt
NOTE: it is very important to make sure that the CA certificate is really what you think it is. The security of the whole protocol depends on that!! This is why the fingerprint is printed on terminal - you should check that from your CA. You can check the fingerprint any time with command
$ openssl x509 -in ca.crt -noout -fingerprint
If the CA sends a certificate chain, sscep writes all certificates in the order it founds them in reply and names them with an integer prefix (-number) appended to CACertFile.
$ ./sscep getca -f sscep.conf
./sscep: requesting CA certificate
./sscep: valid response from server
./sscep: found certificate with
subject: /C=FI/O=klake.org/CN=klake.org VPN RA
issuer: /C=FI/O=klake.org/CN=klake.org VPN CA
usage: Digital Signature, Non Repudiation
MD5 fingerprint: 7A:92:84:2A:6F:EE:28:14:F9:69:D8:9D:61:34:B5:67
./sscep: certificate written as ca.crt-0
./sscep: found certificate with
subject: /C=FI/O=klake.org/CN=klake.org VPN CA
issuer: /C=FI/O=klake.org/CN=klake.org VPN CA
usage: Digital Signature, Non Repudiation, Certificate Sign, CRL Sign
MD5 fingerprint: A5:CE:94:5C:96:77:94:E8:F5:31:AB:D5:31:18:1D:E1
./sscep: certificate written as ca.crt-1
SSCEP prints out issuer, subject, key usage and md5/sha1 fingerprint for each certificate it founds. This information might help you to decide what certificate to use. Some CAs may give you a three (or more) certificates, the root CA(s) plus different RA certificates for encryption and signing. If that's your case, you have to define encryption certificate with command line option (-e) or with conf file keyword EncCertFile. Probably it is the certificate with key usage "Key Encipherment".
Currently, SSCEP doesn't verify the CA/RA certificate chain. You can do it manually with OpenSSL:
$ openssl verify -CAfile ca.crt-1 ca.crt-0
ca.crt-0: OK
NOTE: In case of multiple CA/RA certificates, the actual CA (the one who signs your certificate) might not be the same as the CA/RA you are dealing with. Keep this in mind when installing the CA cert in /etc/isakmpd/ca.
You need to supply configuration file keys URL, CACertFile, PrivateKeyFile, LocalCertFile and CertReqFile. PrivateKeyFile is the key generated in step 2 (local.key), CertReqFile is the request (local.csr) and LocalCertFile is where the enrolled certificate will be written once ready.
If your CA/RA have different certificates for encryption and signing, you must also provide the encryption certificate (EncCertFile).
Normally, the enrollment looks like this:
$ ./sscep enroll -f sscep.conf
./sscep: sending certificate request
./sscep: valid response from server
./sscep: pkistatus: PENDING
./sscep: requesting certificate (#1)
./sscep: valid response from server
./sscep: pkistatus: PENDING
./sscep: requesting certificate (#2)
./sscep: valid response from server
./sscep: pkistatus: PENDING
....
./sscep: requesting certificate (#NNN)
./sscep: valid response from server
./sscep: pkistatus: SUCCESS
./sscep: certificate written as ./local.crt
First message sent is PKCSReq, that's where your request goes. Then the CA writes request down and sends reply PENDING, indicating that the certificate is not signed yet. SSCEP polls periodically for the certificate by sending GetCertInitial messages until the CA returns SUCCESS. The polling interval can be adjusted with PollInterval, or command line option (-t). You can interrupt the process any time and start again using "sscep enroll ..". You should use the command line option (-R) when you continue the interrupted enrollment.
If the CA is configured for automatic enrollment (and your request includes the challenge password), it returns SUCCESS as a first reply. Otherwise, the enrollment requires manual signing and authentication (perhaps a phone call).
Newer SCEP draft versions allow to use the existing certificate (issued by the CA) to authenticate a renewal request. In this context, the SCEP request with the new public key is signed with the old certificate and key (instead of using a self-signed certificate created from the new key pair). To use this feature, use the command line options -O and -K to specify the old certificate and private key (SignCertFile and SignCertKey in the configuration file). The actual behaviour of the SCEP server depends on the CA policy and on the capabilities of the SCEP server (not all servers implement this feature, using the existing certificate with an older SCEP server may or may not work, depending on implementation).
Note: Newer versions of OpenCA (http://www.openca.info/) support an SCEP server that is capable of automatically approving SCEP requests signed with the already existing key pair.
Install local.key, local.crt and ca.crt in the isakmpd default locations and you are ready to go! Default locations are
Private key /etc/isakmpd/private/local.key
Certificate /etc/isakmpd/certs/local.crt
CA certificate /etc/isakmpd/ca/ca.crt
And pay attention to CA certificate if your enrollment was done via RA server. "openssl verify -CAfile ca.crt local.crt" is your friend here.
You need your enrolled certificate for this step.
$ ./sscep getcrl -f sscep.conf
./sscep: requesting crl
./sscep: valid response from server
./sscep: pkistatus: SUCCESS
./sscep: CRL written as ./crl.crl
I'd like to thank the following people for providing me feedback:
Fiel Cabral Manuel Gil Perez
OpenSSL toolkit made this possible.
I would also like to thank OpenSCEP project for it's great software, reading the source code helped me understand the protocol. Unfortunately, it's license is too restrictive for my use.