lloesche/valheim-server Docker image

Valheim Server in a Docker Container (with ValheimPlus support)

Basic Docker Usage

The name of the Docker image is lloesche/valheim-server.

Volume mount the server config directory to /config within the Docker container.

If you have an existing world on a Windows system you can copy it from e.g.
C:\Users\Lukas\AppData\LocalLow\IronGate\Valheim\worlds to e.g.
$HOME/valheim-server/config/worlds and run the image with $HOME/valheim-server/config volume mounted to /config inside the container. The container directory /opt/valheim contains the downloaded server. It can optionally be volume mounted to avoid having to download the server on each fresh start.

$ mkdir -p $HOME/valheim-server/config/worlds $HOME/valheim-server/data
# copy existing world
$ docker run -d \
    --name valheim-server \
    -p 2456-2458:2456-2458/udp \
    -v $HOME/valheim-server/config:/config \
    -v $HOME/valheim-server/data:/opt/valheim \
    -e SERVER_NAME="My Server" \
    -e WORLD_NAME="Neotopia" \
    -e SERVER_PASS="secret" \
    lloesche/valheim-server

Warning: SERVER_PASS must be at least 5 characters long. Otherwise valheim_server.x86_64 will refuse to start!

A fresh start will take several minutes depending on your Internet connection speed as the container will download the Valheim dedicated server from Steam (~1 GB).

Do not forget to modify WORLD_NAME to reflect the name of your world! For existing worlds that is the filename in the worlds/ folder without the .db/.fwl extension.

If you want to play with friends over the Internet and are behind NAT make sure that UDP ports 2456-2458 are forwarded to the container host. Also ensure they are publicly accessible in any firewall.

If your server name does not show up in the server list a couple of minutes after startup you likely have a firewall issue.

There is more info in section Finding Your Server.

For LAN-only play see section Steam Server Favorites & LAN Play

For more deployment options see the Deployment section.

Environment Variables

Name	Default	Purpose
SERVER_NAME	My Server	Name that will be shown in the server browser
SERVER_PORT	2456	UDP start port that the server will listen on
WORLD_NAME	Dedicated	Name of the world without .db/.fwl file extension
SERVER_PASS	secret	Password for logging into the server - min. 5 characters!
SERVER_PUBLIC	1	Whether the server should be listed in the server browser (1) or not (0)
UPDATE_INTERVAL	900	How often we check Steam for an updated server version in seconds. This also controls how often Github is checked for ValheimPlus updates. Note that Github has an API rate limit of 60 req/hour. So setting this to less than 60 will result in errors if V+ is enabled.
RESTART_CRON	0 5 * * *	Cron schedule for server restarts (disabled if set to an empty string)
TZ	Etc/UTC	Container time zone
BACKUPS	true	Whether the server should create periodic backups (true or false)
BACKUPS_INTERVAL	3600	Interval in seconds between backup runs
BACKUPS_DIRECTORY	/config/backups	Path to the backups directory
BACKUPS_MAX_AGE	3	Age in days after which old backups are flushed
PERMISSIONS_UMASK	022	Umask to use for backups, config files and directories
STEAMCMD_ARGS	validate	Additional steamcmd CLI arguments
VALHEIM_PLUS	false	Whether ValheimPlus mod should be loaded (config in /config/valheimplus)

Deployment

Deploying with Docker and systemd

Create an optional config file /etc/sysconfig/valheim-server

SERVER_NAME="My Server"
SERVER_PORT=2456
WORLD_NAME=Dedicated
SERVER_PASS=secret
SERVER_PUBLIC=1

Then enable the Docker container on system boot

$ sudo mkdir -p /etc/valheim /opt/valheim
$ sudo curl -o /etc/systemd/system/valheim-server.service https://raw.githubusercontent.com/lloesche/valheim-server-docker/master/valheim-server.service
$ sudo systemctl daemon-reload
$ sudo systemctl enable valheim-server.service
$ sudo systemctl start valheim-server.service

Deploying to Kubernetes

Kubernetes manifests using this container image, along with a helm chart, are available from the following repository: https://github.com/Addyvan/valheim-k8s

The chart is also available directly using:

helm repo add valheim-k8s https://addyvan.github.io/valheim-k8s/
helm repo update
helm install valheim-server valheim-k8s/valheim-k8s # see repo for full config

Deploying to AWS ECS

CDK Project for spinning up a Valheim game server on AWS Using ECS Fargate and Amazon EFS is available here: https://github.com/rileydakota/valheim-ecs-fargate-cdk

Updates

By default the container will check for Valheim server updates every 15 minutes. If an update is found it is downloaded and the server restarted. This interval can be changed using the UPDATE_INTERVAL environment variable.

Backups

The container will on startup and periodically create a backup of the worlds/ directory.

The default is once per hour but can be changed using the BACKUPS_INTERVAL environment variable. The number is in seconds. Meaning for hourly backups set BACKUPS_INTERVAL=3600.

Default backup directory is /config/backups/ within the container. A different directory can be set using the BACKUPS_DIRECTORY environment variable. It makes sense to have this directory be a volume mount from the host. Warning: do not make the backup directory a subfolder of /config/worlds/. Otherwise each backup will backup all previous backups.

By default 3 days worth of backups will be kept. A different number can be configured using BACKUPS_MAX_AGE. The value is in days.

Beware that backups are performed while the server is running. As such files might be in an open state when the backup runs. However the worlds/ directory also contains a .db.old file for each world which should always be closed and in a consistent state.

Finding Your Server

Once the server is up and running and the log says something like

02/09/2021 10:42:24: Game server connected

it can still be challenging to actually find the server.

There are three ways of getting to your server. Either using the Steam server browser, adding the IP manually or using the in-game Community server list.

In-game

When in-game, click on Join Game and select Community. Wait for the game to load the list of all 4000+ servers. Only 200 servers will be shown at a time so we will have to enter part of our server name to filter the view.

Steam Server Browser

When using the Steam server browser, in Steam go to View -> Servers. Click on CHANGE FILTERS and select Game Valheim. Wait for Steam to load all 4000+ Servers then sort the SERVERS column by clicking on its title. Scroll down until you find your server. From there you can right-click it and add as a favourite.

Note that in my tests when connecting to the server via the Steam server browser I had to enter the server password twice. Once in Steam and once in-game.

Steam Server Favorites & LAN Play

A third option within Steam is to add the server manually by IP. This also allows for LAN play without the need to open or forward any firewall ports.

Steps:

1. Within Steam click on View -> Servers
2. FAVORITES
3. ADD SERVER
4. Enter Server IP and port+1. So if the server is running on UDP port 2456 enter ip:2457
5. FIND GAMES AT THIS ADDRESS...
6. ADD SELECTED GAME SERVER TO FAV...

Do not use the ADD THIS ADDRESS TO FAVORITES button at this point.

NOTE: Sometimes I will get the following error when trying to connect to a LAN server:

In those cases it sometimes helped to add the server again, but this time using port 2456 and now pressing the ADD THIS ADDRESS TO FAVORITES button. It will not generate a new entry in the favourites list but seemingly just update the existing one that was originally discovered on port 2457.

Sometimes it also helps to press the REFRESH button and then immediately double click on the Server.

Overall LAN play via the Steam Server Browser has been a bit hit and miss for me while online play using the in-game search has resulted in the most consistent success.

Admin Commands

Upon startup the server will create a file /config/adminlist.txt. In it you can list the IDs of all administrator users.

The ID of a user can be gotten either in-game by pressing F2

or in the server logs when a user connects.

Administrators can press F5 to open the in-game console and use commands like ban and kick.

ValheimPlus

ValheimPlus is a popular Valheim mod. It has been incorporated into this container. To enable V+ provide the env variable VALHEIM_PLUS=true. Upon first start V+ will create a new directory /config/valheimplus where its config files are located. As a user you are mainly concerned with the values in /config/valheimplus/valheim_plus.cfg. For most modifications the mod has to be installed both, on the server as well as all the clients that connect to the server. A few modifications, like for example changing the dataRate can be done server only.

Updates

ValheimPlus is automatically being updated in the same UPDATE_INTERVAL the Valheim server checks for updates. If an update of either Valheim server or ValheimPlus is found it is being downloaded, configured and the server automatically restarted. This also means your clients always need to run the latest ValheimPlus version or won't be able to connect. If this is undesired the interval can be set to something very high like UPDATE_INTERVAL=31536000 (1 year) and then manually checked for updates using something like docker exec valheim-server supervisorctl restart valheim-updater.

Server data rate

A popular change is to increase the server send rate.

To do so enable ValheimPlus (VALHEIM_PLUS=true) and configure the following section in /config/valheimplus/valheim_plus.cfg

[Server]
enabled=true
enforceMod=false
dataRate=600

(Or whatever dataRate value you require. The value is in kb/s with a default of 60.)

Synology Help

First install

This is not an extensive tutorial, but I hope these screenshots can be helpful. Beware that the server can use multiple GB of RAM and produces a lot of CPU load.

Updating the container image to the latest version

The process of updating the image clears all data stored inside the container. So before doing a container image upgrade, make absolutely sure that /config, which contains your world, is an external volume stored on your NAS (Step 4 of the First install process). It is also a good idea to copy the latest version of the world backup to another location, like your PC.