Skip to content

Latest commit

 

History

History
171 lines (129 loc) · 6.18 KB

INSTALL.RHEL.md

File metadata and controls

171 lines (129 loc) · 6.18 KB
Raw

How to Install Open vSwitch on Red Hat Enterprise Linux

This document describes how to build and install Open vSwitch on a Red Hat Enterprise Linux (RHEL) host. If you want to install Open vSwitch on a generic Linux host, see INSTALL.md instead.

We have tested these instructions with RHEL 5.6 and RHEL 6.0.

For RHEL 7.x (or derivatives, such as CentOS 7.x), you should follow the instructions in INSTALL.Fedora.md. The Fedora spec files are used for RHEL 7.x.

Building Open vSwitch for RHEL

You may build from an Open vSwitch distribution tarball or from an Open vSwitch Git tree.

The default RPM build directory (_topdir) has five directories in the top-level:

  1. BUILD/ Where the software is unpacked and built.
  2. RPMS/ Where the newly created binary package files are written.
  3. SOURCES/ Contains the original sources, patches, and icon files.
  4. SPECS/ Contains the spec files for each package to be built.
  5. SRPMS/ Where the newly created source package files are written.

Before you begin, note the RPM sources directory on your version of RHEL. The command "rpmbuild --showrc" will show the configuration for each of those directories. Alternatively, the command "rpm --eval '%{_topdir}'" shows the current configuration for the top level directory and the command "rpm --eval '%{_sourcedir}'" does the same for the sources directory. On RHEL 5, the default RPM _topdir is /usr/src/redhat and the default RPM sources directory is /usr/src/redhat/SOURCES. On RHEL 6, the default _topdir is $HOME/rpmbuild and the default RPM sources directory is $HOME/rpmbuild/SOURCES.

  1. Install build prerequisites:

    yum install gcc make python-devel openssl-devel kernel-devel graphviz \
    kernel-debug-devel autoconf automake rpm-build redhat-rpm-config \
    libtool

  2. If you are building from a distribution tarball, skip to step 3. Otherwise, you must be building from an Open vSwitch Git tree. Determine what version of Autoconf is installed (e.g. run "autoconf --version"). If it is not at least version 2.63, then you have two choices:

    a. Install Autoconf 2.63 or later, one way or another.

    b. Create a distribution tarball on some other machine, by running "./boot.sh; ./configure; make dist" in the Git tree. You must run this on a machine that has the tools listed in INSTALL.md as prerequisites for building from a Git tree. Afterward, proceed with the rest of the instructions using the distribution tarball.

  3. Some versions of the RHEL 6 kernel-devel package contain a broken "build" symlink. If you are using such a version, you must fix the problem before continuing.

    To find out whether you are affected, run:

    ```
cd /lib/modules/<version>
ls -l build/
```

    where <version> is the version number of the RHEL 6 kernel. (The trailing slash in the final command is important. Be sure to include it.) If the "ls" command produces a directory listing, your kernel-devel package is OK. If it produces a "No such file or directory" error, your kernel-devel package is buggy.

    If your kernel-devel package is buggy, then you can fix it with:

    ```
cd /lib/modules/<version>
rm build
ln -s /usr/src/kernels/<target> build
```

    where <target> is the name of an existing directory under /usr/src/kernels, whose name should be similar to <version> but may contain some extra parts. Once you have done this, verify the fix with the same procedure you used above to check for the problem.

  4. If you are building from a distribution tarball, skip to step 5. Otherwise, create a distribution tarball from the root of the Git tree by running:

    ```
./boot.sh
./configure
make dist
```

  5. Now you have a distribution tarball, named something like openvswitch-x.y.z.tar.gz. Copy this file into the RPM sources directory, e.g.:

    `cp openvswitch-x.y.z.tar.gz $HOME/rpmbuild/SOURCES`

  6. Make another copy of the distribution tarball in a temporary directory. Then unpack the tarball and "cd" into its root, e.g.:

    ```
tar xzf openvswitch-x.y.z.tar.gz
cd openvswitch-x.y.z
```

  7. To build Open vSwitch userspace, run:

    `rpmbuild -bb rhel/openvswitch.spec`

    This produces two RPMs: "openvswitch" and "openvswitch-debuginfo".

    The above command automatically runs the Open vSwitch unit tests. To disable the unit tests, run:

    `rpmbuild -bb --without check rhel/openvswitch.spec`

    If the build fails with "configure: error: source dir /lib/modules/2.6.32-279.el6.x86_64/build doesn't exist" or similar, then the kernel-devel package is missing or buggy. Go back to step 1 or 2 and fix the problem.

  8. On RHEL 6, to build the Open vSwitch kernel module, copy rhel/openvswitch-kmod.files into the RPM sources directory and run:

    rpmbuild -bb rhel/openvswitch-kmod-rhel6.spec

    You might have to specify a kernel version and/or variants, e.g.:

    rpmbuild -bb \
	-D "kversion 2.6.32-131.6.1.el6.x86_64" \
	-D "kflavors default debug kdump" \
	rhel/openvswitch-kmod-rhel6.spec

    This produces an "kmod-openvswitch" RPM for each kernel variant, in this example: "kmod-openvswitch", "kmod-openvswitch-debug", and "kmod-openvswitch-kdump".

A RHEL host has default firewall rules that prevent any Open vSwitch tunnel traffic from passing through. If a user configures Open vSwitch tunnels like Geneve, GRE, VXLAN, LISP etc., they will either have to manually add iptables firewall rules to allow the tunnel traffic or add it through a startup script (Please refer to the "enable-protocol" command in the ovs-ctl(8) manpage).

Red Hat Network Scripts Integration

Simple integration with Red Hat network scripts has been implemented. Please read rhel/README.RHEL in the source tree or /usr/share/doc/openvswitch/README.RHEL in the installed openvswitch package for details.

Reporting Bugs

Please report problems to [email protected].