This repository is a ported version of Michael Ossmann's libhackrf ([https://github.com/mossmann/hackrf/tree/master/host/libhackrf] (https://github.com/mossmann/hackrf/tree/master/host/libhackrf)) library to work with Android 3.1+.
(photo by Dennis Mantz)
See http://tech.mantz-it.com and @dennismantz for updates.
- Open HackRF (including the USB permission request)
- Reading Board ID from HackRF
- Reading Version from HackRF
- Reading Part ID and Serial Number from HackRF
- Setting Sample Rate of HackRF
- Setting Frequency of HackRF
- Setting Baseband Filter Width of HackRF
- Compute Baseband Filter Width for given Sample Rate
- Setting VGA Gain (Rx/Tx) of HackRF
- Setting LNA Gain of HackRF
- Setting Amplifier of HackRF
- Setting Antenna Port Power of HackRF
- Setting Transceiver Mode of HackRF
- Receiving from the HackRF using a BlockingQueue
- Transmitting to the HackRF using a BlockingQueue
- Get Transmission statistics
- Example App that shows how to use the library
| Device | Does it work? | Comments | Tester |
|---|---|---|---|
| Oneplus One | yes | KR0SIV | |
| Nexus 7 2012 | yes | ~ 2 Msps, Filewriter is too slow. | demantz |
| Nexus 7 2013 | yes | 15 Msps | @kx3companion |
| Nexus 4 | needs ROM... | ...and Y cable. (http://goo.gl/rRyQVM) | - |
| Nexus 5 | yes | 15 Msps | demantz |
| Moto G | yes | ~ 2 Msps | @kx3companion |
| Acer A500 | yes | ~ 5 Msps | @digiital |
| Samsung S3 LTE | yes | 10 Msps, running CM 10.1.3 | dc1rdb |
| Samsung S4 | yes | @digiital | |
| Samsung S4 LTE | yes | 10 Msps | Jonyweb |
| Samsung S4 Zoom | yes | Ace Rimmer | |
| Samsung S5 | yes | @simonroses | |
| Samsung Note 3 | yes | @M3atShi3ld | |
| Galaxy Tab S 8.4 | yes | Christophe Morel | |
| Galaxy Tab S 10.5 | yes | Harald Pedersen | |
| HTC M8 | yes | dmaynor | |
| Sony Xperia Pro | no | insufficient USB bus power | anttivs |
| Sony Xperia Z2 | yes | Harald Pedersen | |
| LG G2 | yes | @michaelossmann | |
| LG G3 | yes | @HashHacks | |
| Moto G 4G | yes | @paul2dart | |
| Motorola Xoom M601 | yes | Reg Blank | |
| Dragon Touch A1X | yes | John Wright | |
| Moto X (1st gen) | yes | sabas1080 |
- USB connection is too slow for Sample Rates >15 Msps (testet on Nexus 7)
- FileWriter in example app is too slow. Only works for ~ 2 Msps on old devices.
- It seems that the HackRF sometimes gets to less power if using a to long or low quality USB cable.
Build the library and the example app by using the Android Studio projects:
- hackrf_android/
- hackrf_android/examples/
If you want to use the library in your own app, just copy the hackrf_android/app/build/outputs/aar/app-debug.aar file into your project and include it as a library. See the example project to learn how to use the library.
The hackrf_android.aar and the HackRF_Test.apk files are also in this repository so that they can be used without building them. But they won't be synched to the latest code base all the time.
A short howto to get started can be found on this blog post: [http://tech.mantz-it.com/2014/10/hackrfandroid-using-hackrf-with-android.html] (http://tech.mantz-it.com/2014/10/hackrfandroid-using-hackrf-with-android.html)
Use the example application to test the library on your device and trouble shoot any problems. It has the option to show the logcat output!
This library is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. http://www.gnu.org/licenses/gpl.html GPL version 2 or higher
principal author: Dennis Mantz <dennis.mantzgooglemail.com>
principal author of libhackrf: Michael Ossmann <mikeossmann.com>