DBC file for Tesla Model 3 CAN messages

AI-on-the-Edge Device [SLFork]

1p3p Umschaltung für Heidelberg Energy Control

This repository features an Energy Optimization System (EOS) that optimizes energy distribution, usage for batteries, heat pumps& household devices. It includes predictive models for electricity pr…

Alternative (and improved) Home Connect integration for Home Assistant

This revolutionary software enables EV battery packs to be easily reused for stationary storage in combination with solar inverters

Deye battery messages via the PCS and InterCAN bus

ETS programmable/configurable Firmware for ESP8266 MCU platform based on the Sonoff S20 example in thelsings KNX-Library.

Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an inverter using any protocol (e.g. UART, RS485, ModBus or CAN)

Interact with Tesla vehicles over BLE using ESPHome and Home Assistant

Reverse engineered Deye battery serial bus reader

A fork of the Home Assistant SmartThings Integration. This adds better support for Samsung OCF Devices.

TeslaBleHttpProxy is a program written in Go that receives HTTP requests and forwards them via Bluetooth to a Tesla vehicle. The program can, for example, be easily used together with evcc.

This CPP library facilitates direct communication with Tesla vehicles via the BLE API.

Documentation and tooling to use Deye microinverters without the solarman cloud

A simple Android app that turns your phone into an instrument cluster for your Tesla Model 3 and Y

A controller for Somfy RTS shades and blinds

Provides helper sensors for EPEX Spot integration.

ESP32 and ESP32-S3 board with CAN interface, runs on 12V power (with auto shutdown)

Easily extract login credentials and WLAN keys from Deye and compatible (e.g. Bosswerk, Turbo-E) microinverters without authentication :)

ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon

Eastron SDM630 Modbus (Man) In The Middle

Cross platform GUI MODBUS TCP/RTU simulator & gateway. Interprets data types including ascii float and int.

Code to make experiment on TTN Mapper with GPS and TTGO

A power distribution card inspired by the official Energy Distribution card for Home Assistant