Merge branch 'akpm' (updates from Andrew Morton)

Merge first patch-bomb from Andrew Morton:
 - various misc bits
 - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been
   distracted.  There has been quite a bit of activity.
 - About half the MM queue
 - Some backlight bits
 - Various lib/ updates
 - checkpatch updates
 - zillions more little rtc patches
 - ptrace
 - signals
 - exec
 - procfs
 - rapidio
 - nbd
 - aoe
 - pps
 - memstick
 - tools/testing/selftests updates

* emailed patches from Andrew Morton <[email protected]>: (445 commits)
  tools/testing/selftests: don't assume the x bit is set on scripts
  selftests: add .gitignore for kcmp
  selftests: fix clean target in kcmp Makefile
  selftests: add .gitignore for vm
  selftests: add hugetlbfstest
  self-test: fix make clean
  selftests: exit 1 on failure
  kernel/resource.c: remove the unneeded assignment in function __find_resource
  aio: fix wrong comment in aio_complete()
  drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode
  drivers/memstick/host/r592.c: convert to module_pci_driver
  drivers/memstick/host/jmb38x_ms: convert to module_pci_driver
  pps-gpio: add device-tree binding and support
  drivers/pps/clients/pps-gpio.c: convert to module_platform_driver
  drivers/pps/clients/pps-gpio.c: convert to devm_* helpers
  drivers/parport/share.c: use kzalloc
  Documentation/accounting/getdelays.c: avoid strncpy in accounting tool
  aoe: update internal version number to v83
  aoe: update copyright date
  aoe: perform I/O completions in parallel
  ...

Documentation/CodingStyle

@@ -389,7 +389,8 @@ Albeit deprecated by some people, the equivalent of the goto statement is
 used frequently by compilers in form of the unconditional jump instruction.
 
 The goto statement comes in handy when a function exits from multiple
-locations and some common work such as cleanup has to be done.
+locations and some common work such as cleanup has to be done.  If there is no
+cleanup needed then just return directly.
 
 The rationale is:
 

Documentation/DocBook/kernel-locking.tmpl

@@ -1955,12 +1955,17 @@ machines due to caching.
    </sect1>
   </chapter>
 
-  <chapter id="apiref">
+  <chapter id="apiref-mutex">
    <title>Mutex API reference</title>
 !Iinclude/linux/mutex.h
 !Ekernel/mutex.c
   </chapter>
 
+  <chapter id="apiref-futex">
+   <title>Futex API reference</title>
+!Ikernel/futex.c
+  </chapter>
+
   <chapter id="references">
    <title>Further reading</title>
 

Documentation/accounting/getdelays.c

@@ -272,7 +272,7 @@ int main(int argc, char *argv[])
 	char *logfile = NULL;
 	int loop = 0;
 	int containerset = 0;
-	char containerpath[1024];
+	char *containerpath = NULL;
 	int cfd = 0;
 	int forking = 0;
 	sigset_t sigset;
@@ -299,7 +299,7 @@ int main(int argc, char *argv[])
 			break;
 		case 'C':
 			containerset = 1;
-			strncpy(containerpath, optarg, strlen(optarg) + 1);
+			containerpath = optarg;
 			break;
 		case 'w':
 			logfile = strdup(optarg);

Documentation/cgroups/memory.txt

@@ -834,10 +834,9 @@ Test:
 
 12. TODO
 
-1. Add support for accounting huge pages (as a separate controller)
-2. Make per-cgroup scanner reclaim not-shared pages first
-3. Teach controller to account for shared-pages
-4. Start reclamation in the background when the limit is
+1. Make per-cgroup scanner reclaim not-shared pages first
+2. Teach controller to account for shared-pages
+3. Start reclamation in the background when the limit is
    not yet hit but the usage is getting closer
 
 Summary

Documentation/crypto/async-tx-api.txt

@@ -222,5 +222,4 @@ drivers/dma/: location for offload engine drivers
 include/linux/async_tx.h: core header file for the async_tx api
 crypto/async_tx/async_tx.c: async_tx interface to dmaengine and common code
 crypto/async_tx/async_memcpy.c: copy offload
-crypto/async_tx/async_memset.c: memory fill offload
 crypto/async_tx/async_xor.c: xor and xor zero sum offload

Documentation/devices.txt

@@ -100,8 +100,7 @@ Your cooperation is appreciated.
 		 10 = /dev/aio		Asynchronous I/O notification interface
 		 11 = /dev/kmsg		Writes to this come out as printk's, reads
 					export the buffered printk records.
-		 12 = /dev/oldmem	Used by crashdump kernels to access
-					the memory of the kernel that crashed.
+		 12 = /dev/oldmem	OBSOLETE - replaced by /proc/vmcore
 
   1 block	RAM disk
 		  0 = /dev/ram0		First RAM disk

Documentation/devicetree/bindings/pps/pps-gpio.txt

@@ -0,0 +1,20 @@
+Device-Tree Bindings for a PPS Signal on GPIO
+
+These properties describe a PPS (pulse-per-second) signal connected to
+a GPIO pin.
+
+Required properties:
+- compatible: should be "pps-gpio"
+- gpios: one PPS GPIO in the format described by ../gpio/gpio.txt
+
+Optional properties:
+- assert-falling-edge: when present, assert is indicated by a falling edge
+                       (instead of by a rising edge)
+
+Example:
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio2 6 0>;
+
+		assert-falling-edge;
+	};

Documentation/filesystems/proc.txt

@@ -473,7 +473,8 @@ This file is only present if the CONFIG_MMU kernel configuration option is
 enabled.
 
 The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG
-bits on both physical and virtual pages associated with a process.
+bits on both physical and virtual pages associated with a process, and the
+soft-dirty bit on pte (see Documentation/vm/soft-dirty.txt for details).
 To clear the bits for all the pages associated with the process
     > echo 1 > /proc/PID/clear_refs
 
@@ -482,6 +483,10 @@ To clear the bits for the anonymous pages associated with the process
 
 To clear the bits for the file mapped pages associated with the process
     > echo 3 > /proc/PID/clear_refs
+
+To clear the soft-dirty bit
+    > echo 4 > /proc/PID/clear_refs
+
 Any other value written to /proc/PID/clear_refs will have no effect.
 
 The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags

Documentation/filesystems/vfs.txt

@@ -559,7 +559,6 @@ your filesystem. The following members are defined:
 struct address_space_operations {
 	int (*writepage)(struct page *page, struct writeback_control *wbc);
 	int (*readpage)(struct file *, struct page *);
-	int (*sync_page)(struct page *);
 	int (*writepages)(struct address_space *, struct writeback_control *);
 	int (*set_page_dirty)(struct page *page);
 	int (*readpages)(struct file *filp, struct address_space *mapping,
@@ -581,6 +580,9 @@ struct address_space_operations {
 	/* migrate the contents of a page to the specified target */
 	int (*migratepage) (struct page *, struct page *);
 	int (*launder_page) (struct page *);
+	int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
+					unsigned long);
+	void (*is_dirty_writeback) (struct page *, bool *, bool *);
 	int (*error_remove_page) (struct mapping *mapping, struct page *page);
 	int (*swap_activate)(struct file *);
 	int (*swap_deactivate)(struct file *);
@@ -612,13 +614,6 @@ struct address_space_operations {
        In this case, the page will be relocated, relocked and if
        that all succeeds, ->readpage will be called again.
 
-  sync_page: called by the VM to notify the backing store to perform all
-  	queued I/O operations for a page. I/O operations for other pages
-	associated with this address_space object may also be performed.
-
-	This function is optional and is called only for pages with
-  	PG_Writeback set while waiting for the writeback to complete.
-
   writepages: called by the VM to write out pages associated with the
   	address_space object.  If wbc->sync_mode is WBC_SYNC_ALL, then
   	the writeback_control will specify a range of pages that must be
@@ -747,6 +742,20 @@ struct address_space_operations {
   	prevent redirtying the page, it is kept locked during the whole
 	operation.
 
+  is_partially_uptodate: Called by the VM when reading a file through the
+	pagecache when the underlying blocksize != pagesize. If the required
+	block is up to date then the read can complete without needing the IO
+	to bring the whole page up to date.
+
+  is_dirty_writeback: Called by the VM when attempting to reclaim a page.
+	The VM uses dirty and writeback information to determine if it needs
+	to stall to allow flushers a chance to complete some IO. Ordinarily
+	it can use PageDirty and PageWriteback but some filesystems have
+	more complex state (unstable pages in NFS prevent reclaim) or
+	do not set those flags due to locking problems (jbd). This callback
+	allows a filesystem to indicate to the VM if a page should be
+	treated as dirty or writeback for the purposes of stalling.
+
   error_remove_page: normally set to generic_error_remove_page if truncation
 	is ok for this address space. Used for memory failure handling.
 	Setting this implies you deal with pages going away under you,

Documentation/kdump/kdump.txt

@@ -47,19 +47,12 @@ parameter. Optionally the size of the ELF header can also be passed
 when using the elfcorehdr=[size[KMG]@]offset[KMG] syntax.
 
 
-With the dump-capture kernel, you can access the memory image, or "old
-memory," in two ways:
-
-- Through a /dev/oldmem device interface. A capture utility can read the
-  device file and write out the memory in raw format. This is a raw dump
-  of memory. Analysis and capture tools must be intelligent enough to
-  determine where to look for the right information.
-
-- Through /proc/vmcore. This exports the dump as an ELF-format file that
-  you can write out using file copy commands such as cp or scp. Further,
-  you can use analysis tools such as the GNU Debugger (GDB) and the Crash
-  tool to debug the dump file. This method ensures that the dump pages are
-  correctly ordered.
+With the dump-capture kernel, you can access the memory image through
+/proc/vmcore. This exports the dump as an ELF-format file that you can
+write out using file copy commands such as cp or scp. Further, you can
+use analysis tools such as the GNU Debugger (GDB) and the Crash tool to
+debug the dump file. This method ensures that the dump pages are correctly
+ordered.
 
 
 Setup and Installation
@@ -423,18 +416,6 @@ the following command:
 
    cp /proc/vmcore <dump-file>
 
-You can also access dumped memory as a /dev/oldmem device for a linear
-and raw view. To create the device, use the following command:
-
-    mknod /dev/oldmem c 1 12
-
-Use the dd command with suitable options for count, bs, and skip to
-access specific portions of the dump.
-
-To see the entire memory, use the following command:
-
-   dd if=/dev/oldmem of=oldmem.001
-
 
 Analysis
 ========

Documentation/rapidio/rapidio.txt

@@ -73,28 +73,44 @@ data structure. This structure includes lists of all devices and local master
 ports that form the same network. It also contains a pointer to the default
 master port that is used to communicate with devices within the network.
 
+2.5 Device Drivers
+
+RapidIO device-specific drivers follow Linux Kernel Driver Model and are
+intended to support specific RapidIO devices attached to the RapidIO network.
+
+2.6 Subsystem Interfaces
+
+RapidIO interconnect specification defines features that may be used to provide
+one or more common service layers for all participating RapidIO devices. These
+common services may act separately from device-specific drivers or be used by
+device-specific drivers. Example of such service provider is the RIONET driver
+which implements Ethernet-over-RapidIO interface. Because only one driver can be
+registered for a device, all common RapidIO services have to be registered as
+subsystem interfaces. This allows to have multiple common services attached to
+the same device without blocking attachment of a device-specific driver.
+
 3. Subsystem Initialization
 ---------------------------
 
 In order to initialize the RapidIO subsystem, a platform must initialize and
 register at least one master port within the RapidIO network. To register mport
-within the subsystem controller driver initialization code calls function
+within the subsystem controller driver's initialization code calls function
 rio_register_mport() for each available master port.
 
-RapidIO subsystem uses subsys_initcall() or device_initcall() to perform
-controller initialization (depending on controller device type).
-
 After all active master ports are registered with a RapidIO subsystem,
 an enumeration and/or discovery routine may be called automatically or
 by user-space command.
 
+RapidIO subsystem can be configured to be built as a statically linked or
+modular component of the kernel (see details below).
+
 4. Enumeration and Discovery
 ----------------------------
 
 4.1 Overview
 ------------
 
-RapidIO subsystem configuration options allow users to specify enumeration and
+RapidIO subsystem configuration options allow users to build enumeration and
 discovery methods as statically linked components or loadable modules.
 An enumeration/discovery method implementation and available input parameters
 define how any given method can be attached to available RapidIO mports:
@@ -115,8 +131,8 @@ several methods to initiate an enumeration and/or discovery process:
   endpoint waits for enumeration to be completed. If the specified timeout
   expires the discovery process is terminated without obtaining RapidIO network
   information. NOTE: a timed out discovery process may be restarted later using
-  a user-space command as it is described later if the given endpoint was
-  enumerated successfully.
+  a user-space command as it is described below (if the given endpoint was
+  enumerated successfully).
 
   (b) Statically linked enumeration and discovery process can be started by
   a command from user space. This initiation method provides more flexibility
@@ -138,15 +154,42 @@ When a network scan process is started it calls an enumeration or discovery
 routine depending on the configured role of a master port: host or agent.
 
 Enumeration is performed by a master port if it is configured as a host port by
-assigning a host device ID greater than or equal to zero. A host device ID is
-assigned to a master port through the kernel command line parameter "riohdid=",
-or can be configured in a platform-specific manner. If the host device ID for
-a specific master port is set to -1, the discovery process will be performed
-for it.
+assigning a host destination ID greater than or equal to zero. The host
+destination ID can be assigned to a master port using various methods depending
+on RapidIO subsystem build configuration:
+
+  (a) For a statically linked RapidIO subsystem core use command line parameter
+  "rapidio.hdid=" with a list of destination ID assignments in order of mport
+  device registration. For example, in a system with two RapidIO controllers
+  the command line parameter "rapidio.hdid=-1,7" will result in assignment of
+  the host destination ID=7 to the second RapidIO controller, while the first
+  one will be assigned destination ID=-1.
+
+  (b) If the RapidIO subsystem core is built as a loadable module, in addition
+  to the method shown above, the host destination ID(s) can be specified using
+  traditional methods of passing module parameter "hdid=" during its loading:
+  - from command line: "modprobe rapidio hdid=-1,7", or
+  - from modprobe configuration file using configuration command "options",
+    like in this example: "options rapidio hdid=-1,7". An example of modprobe
+    configuration file is provided in the section below.
+
+  NOTES:
+  (i) if "hdid=" parameter is omitted all available mport will be assigned
+  destination ID = -1;
+  (ii) the "hdid=" parameter in systems with multiple mports can have
+  destination ID assignments omitted from the end of list (default = -1).
+
+If the host device ID for a specific master port is set to -1, the discovery
+process will be performed for it.
 
 The enumeration and discovery routines use RapidIO maintenance transactions
 to access the configuration space of devices.
 
+NOTE: If RapidIO switch-specific device drivers are built as loadable modules
+they must be loaded before enumeration/discovery process starts.
+This requirement is cased by the fact that enumeration/discovery methods invoke
+vendor-specific callbacks on early stages.
+
 4.2 Automatic Start of Enumeration and Discovery
 ------------------------------------------------
 
@@ -266,7 +309,36 @@ method's module initialization routine calls rio_register_scan() to attach
 an enumerator to a specified mport device (or devices). The basic enumerator
 implementation demonstrates this process.
 
-5. References
+4.6 Using Loadable RapidIO Switch Drivers
+-----------------------------------------
+
+In the case when RapidIO switch drivers are built as loadable modules a user
+must ensure that they are loaded before the enumeration/discovery starts.
+This process can be automated by specifying pre- or post- dependencies in the
+RapidIO-specific modprobe configuration file as shown in the example below.
+
+  File /etc/modprobe.d/rapidio.conf:
+  ----------------------------------
+
+  # Configure RapidIO subsystem modules
+
+  # Set enumerator host destination ID (overrides kernel command line option)
+  options rapidio hdid=-1,2
+
+  # Load RapidIO switch drivers immediately after rapidio core module was loaded
+  softdep rapidio post: idt_gen2 idtcps tsi57x
+
+  # OR :
+
+  # Load RapidIO switch drivers just before rio-scan enumerator module is loaded
+  softdep rio-scan pre: idt_gen2 idtcps tsi57x
+
+  --------------------------
+
+NOTE: In the example above, one of "softdep" commands must be removed or
+commented out to keep required module loading sequence.
+
+A. References
 -------------
 
 [1] RapidIO Trade Association. RapidIO Interconnect Specifications.

Documentation/rapidio/sysfs.txt

@@ -40,6 +40,7 @@ device_rev - returns the device revision level
              (see 4.1 for switch specific details)
    lprev   - returns name of previous device (switch) on the path to the device
              that that owns this attribute
+  modalias - returns the device modalias
 
 In addition to the files listed above, each device has a binary attribute file
 that allows read/write access to the device configuration registers using

Documentation/rtc.txt

@@ -153,9 +153,10 @@ since_epoch:	 The number of seconds since the epoch according to the RTC
 time:		 RTC-provided time
 wakealarm:	 The time at which the clock will generate a system wakeup
 		 event. This is a one shot wakeup event, so must be reset
-		 after wake if a daily wakeup is required. Format is either
-		 seconds since the epoch or, if there's a leading +, seconds
-		 in the future.
+		 after wake if a daily wakeup is required. Format is seconds since
+		 the epoch by default, or if there's a leading +, seconds in the
+		 future, or if there is a leading +=, seconds ahead of the current
+		 alarm.
 
 IOCTL INTERFACE
 ---------------

Documentation/vm/pagemap.txt

@@ -15,7 +15,8 @@ There are three components to pagemap:
     * Bits 0-54  page frame number (PFN) if present
     * Bits 0-4   swap type if swapped
     * Bits 5-54  swap offset if swapped
-    * Bits 55-60 page shift (page size = 1<<page shift)
+    * Bit  55    pte is soft-dirty (see Documentation/vm/soft-dirty.txt)
+    * Bits 56-60 zero
     * Bit  61    page is file-page or shared-anon
     * Bit  62    page swapped
     * Bit  63    page present