Skip to content

Commit

Permalink
Prechod na SF41
Browse files Browse the repository at this point in the history
  • Loading branch information
AxTheB committed May 16, 2011
1 parent 0ec3c02 commit ef423df
Showing 31 changed files with 55 additions and 64 deletions.
1 change: 1 addition & 0 deletions README
Original file line number Diff line number Diff line change
@@ -0,0 +1 @@
Skeinforge config for brmlabs skeinforge
2 changes: 1 addition & 1 deletion profiles/cutting.csv
Original file line number Diff line number Diff line change
@@ -1,4 +1,4 @@
Format is tab separated cutting settings.
Name Value
_Name Value
WindowPosition 0+400
Profile Selection: end_mill
2 changes: 1 addition & 1 deletion profiles/extrusion.csv
Original file line number Diff line number Diff line change
@@ -1,4 +1,4 @@
Format is tab separated extrusion settings.
Name Value
_Name Value
WindowPosition 0+400
Profile Selection: PLA
2 changes: 1 addition & 1 deletion profiles/extrusion/ABS/carve.csv
Original file line number Diff line number Diff line change
@@ -1,5 +1,5 @@
Format is tab separated carve settings.
Name Value
_Name Value
WindowPosition 700+0
Open File for Carve
Add Layer Template to SVG True
4 changes: 2 additions & 2 deletions profiles/extrusion/ABS/skeinforge.csv
Original file line number Diff line number Diff line change
@@ -1,6 +1,6 @@
Format is tab separated skeinforge settings.
Name Value
WindowPosition 0+24
_Name Value
WindowPosition 400+0
Open File for Skeinforge
analyze False
craft True
2 changes: 1 addition & 1 deletion profiles/extrusion/ABS/skeinforge_craft.csv
Original file line number Diff line number Diff line change
@@ -1,5 +1,5 @@
Format is tab separated skeinforge craft settings.
Name Value
_Name Value
WindowPosition 600+0
Open File for Craft
bottom False
2 changes: 1 addition & 1 deletion profiles/extrusion/ABS/skeinforge_help.csv
Original file line number Diff line number Diff line change
@@ -1,4 +1,4 @@
Format is tab separated skeinforge help settings.
Name Value
_Name Value
WindowPosition 600+0
Wiki Manual Primary True
2 changes: 1 addition & 1 deletion profiles/extrusion/PLA/bottom.csv
Original file line number Diff line number Diff line change
@@ -3,6 +3,6 @@ _Name Value
WindowPosition 700+0
Open File for Bottom
Activate Bottom True
Additional Height over Layer Thickness (ratio): 1.0
Additional Height over Layer Thickness (ratio): 0.5
Altitude (mm): 0.0
SVG Viewer: webbrowser
2 changes: 1 addition & 1 deletion profiles/extrusion/PLA/comment.csv
Original file line number Diff line number Diff line change
@@ -1,5 +1,5 @@
Format is tab separated comment settings.
Name Value
_Name Value
WindowPosition 700+0
Activate Comment False
Open File to Write Comments for
4 changes: 2 additions & 2 deletions profiles/extrusion/PLA/cool.csv
Original file line number Diff line number Diff line change
@@ -7,8 +7,8 @@ Bridge Cool (Celcius): 1.0
Orbit False
Slow Down True
Maximum Cool (Celcius): 2.0
Minimum Layer Time (seconds): 25.0
Minimum Orbital Radius (millimeters): 22.0
Minimum Layer Time (seconds): 20.0
Minimum Orbital Radius (millimeters): 10.0
Name of Cool End File: cool_end.gcode
Name of Cool Start File: cool_start.gcode
Turn Fan On at Beginning True
6 changes: 3 additions & 3 deletions profiles/extrusion/PLA/dimension.csv
Original file line number Diff line number Diff line change
@@ -5,8 +5,8 @@ Open File for Dimension
Activate Dimension True
Absolute Extrusion Distance True
Relative Extrusion Distance False
Extruder Retraction Speed (mm/s): 13.3
Extruder Retraction Speed (mm/s): 10.0
Filament Diameter (mm): 2.8
Filament Packing Density (ratio): 0.97
Retraction Distance (millimeters): 2.0
Filament Packing Density (ratio): 1.0
Retraction Distance (millimeters): 1.5
Restart Extra Distance (millimeters): 0.0
2 changes: 1 addition & 1 deletion profiles/extrusion/PLA/fill.csv
Original file line number Diff line number Diff line change
@@ -21,7 +21,7 @@ Grid Hexagonal False
Grid Rectangular False
Line True
Infill Perimeter Overlap (ratio): 0.15
Infill Solidity (ratio): 0.23
Infill Solidity (ratio): 0.2
Infill Width over Thickness (ratio): 1.5
Solid Surface Thickness (layers): 3
Lower Left True
4 changes: 2 additions & 2 deletions profiles/extrusion/PLA/fillet.csv
Original file line number Diff line number Diff line change
@@ -2,12 +2,12 @@ Format is tab separated fillet settings.
_Name Value
WindowPosition 700+0
Open File to be Filleted
Activate Fillet True
Activate Fillet False
Arc Point False
Arc Radius False
Arc Segment False
Bevel True
Corner Feed Rate over Operating Feed Rate (ratio): 0.96
Corner Feed Rate over Operating Feed Rate (ratio): 1.0
Fillet Radius over Perimeter Width (ratio): 0.35
Reversal Slowdown Distance over Perimeter Width (ratio): 0.5
Use Intermediate Feed Rate in Corners True
2 changes: 1 addition & 1 deletion profiles/extrusion/PLA/interpret.csv
Original file line number Diff line number Diff line change
@@ -1,5 +1,5 @@
Format is tab separated interpret settings.
Name Value
_Name Value
WindowPosition 700+0
Open File for Interpret
Activate Interpret False
4 changes: 2 additions & 2 deletions profiles/extrusion/PLA/limit.csv
Original file line number Diff line number Diff line change
@@ -3,5 +3,5 @@ _Name Value
WindowPosition 700+0
Open File for Limit
Activate Limit True
Maximum Initial Feed Rate (mm/s): 35.0
Maximum Z Feed Rate (mm/s): 1.5
Maximum Initial Feed Rate (mm/s): 1.0
Maximum Z Feed Rate (mm/s): 1.0
6 changes: 3 additions & 3 deletions profiles/extrusion/PLA/multiply.csv
Original file line number Diff line number Diff line change
@@ -1,10 +1,10 @@
Format is tab separated multiply settings.
_Name Value
WindowPosition 700+0
Open File for Multiply /home/reprap/Documents/tisky/endstop_holder_l.stl
Open File for Multiply
Activate Multiply: True
Center X (mm): 90.0
Center Y (mm): 90.0
Number of Columns (integer): 2
Number of Rows (integer): 2
Number of Columns (integer): 1
Number of Rows (integer): 1
Separation over Perimeter Width (ratio): 15.0
2 changes: 1 addition & 1 deletion profiles/extrusion/PLA/polyfile.csv
Original file line number Diff line number Diff line change
@@ -1,5 +1,5 @@
Format is tab separated polyfile settings.
Name Value
_Name Value
WindowPosition 700+0
Execute All Unmodified Files in a Directory False
Execute File True
8 changes: 4 additions & 4 deletions profiles/extrusion/PLA/raft.csv
Original file line number Diff line number Diff line change
@@ -20,18 +20,18 @@ Interface Layers (integer): 0
Interface Nozzle Lift over Interface Layer Thickness (ratio): 0.45
Name of Support End File: support_end.gcode
Name of Support Start File: support_start.gcode
Object First Layer Feed Rate Infill Multiplier (ratio): 0.5
Object First Layer Feed Rate Infill Multiplier (ratio): 0.4
Object First Layer Feed Rate Perimeter Multiplier (ratio): 0.4
Object First Layer Flow Rate Infill Multiplier (ratio): 0.5
Object First Layer Flow Rate Infill Multiplier (ratio): 0.4
Object First Layer Flow Rate Perimeter Multiplier (ratio): 0.4
Operating Nozzle Lift over Layer Thickness (ratio): 0.5
Raft Additional Margin over Length (%): 1.0
Raft Margin (mm): 3.0
Support Cross Hatch False
Support Flow Rate over Operating Flow Rate (ratio): 1.0
Support Gap over Perimeter Extrusion Width (ratio): 1.0
None False
None True
Empty Layers Only False
Everywhere False
Exterior Only True
Exterior Only False
Support Minimum Angle (degrees): 60.0
2 changes: 1 addition & 1 deletion profiles/extrusion/PLA/skeinforge.csv
Original file line number Diff line number Diff line change
@@ -1,6 +1,6 @@
Format is tab separated skeinforge settings.
_Name Value
WindowPosition 614+25
WindowPosition 0+25
Open File for Skeinforge
analyze False
craft True
10 changes: 0 additions & 10 deletions profiles/extrusion/PLA/skeinforge_analyze.csv

This file was deleted.

6 changes: 3 additions & 3 deletions profiles/extrusion/PLA/skeinforge_craft.csv
Original file line number Diff line number Diff line change
@@ -1,7 +1,7 @@
Format is tab separated skeinforge craft settings.
_Name Value
WindowPosition 600+0
Open File for Craft /home/reprap/CZestmyr/peghook.stl
Open File for Craft /home/ax/src/reprap/reprap-parts/gregs_bearing_sleeve.stl
bottom False
carve False
chamber False
@@ -11,7 +11,7 @@ clip False
coil False
comb False
cool False
dimension False
dimension True
drill False
export False
feed False
@@ -26,7 +26,7 @@ lash False
lift False
limit False
mill False
multiply True
multiply False
oozebane False
outset False
preface False
2 changes: 1 addition & 1 deletion profiles/extrusion/PLA/skeinforge_help.csv
Original file line number Diff line number Diff line change
@@ -1,4 +1,4 @@
Format is tab separated skeinforge help settings.
Name Value
_Name Value
WindowPosition 600+0
Wiki Manual Primary True
6 changes: 3 additions & 3 deletions profiles/extrusion/PLA/skeiniso.csv
Original file line number Diff line number Diff line change
@@ -14,7 +14,7 @@ From the Bottom False
From the Top True
Draw Arrows False
Go Around Extruder Off Travel False
Layer (index): 5
Layer (index): 0
Layer Extra Span (integer): 912345678
Line (index): 0
Display Line True
@@ -23,8 +23,8 @@ View Rotate False
Number of Fill Bottom Layers (integer): 1
Number of Fill Top Layers (integer): 1
Scale (pixels per millimeter): 15.0
Screen Horizontal Inset (pixels): 60
Screen Vertical Inset (pixels): 170
Screen Horizontal Inset (pixels): 1084
Screen Vertical Inset (pixels): 220
Show Gcode True
Viewpoint Latitude (degrees): 15.0
Viewpoint Longitude (degrees): 210.0
8 changes: 4 additions & 4 deletions profiles/extrusion/PLA/skeinlayer.csv
Original file line number Diff line number Diff line change
@@ -8,14 +8,14 @@ Animation Line Quickening (ratio): 1.0
Animation Slide Show Rate (layers/second): 2.0
Draw Arrows True
Go Around Extruder Off Travel False
Layer (index): 20
Layer (index): 4
Layer Extra Span (integer): 0
Line (index): 0
Display Line True
View Move False
Scale (pixels per millimeter): 10.0
Screen Horizontal Inset (pixels): 86
Screen Vertical Inset (pixels): 196
Scale (pixels per millimeter): 15.0
Screen Horizontal Inset (pixels): 1110
Screen Vertical Inset (pixels): 220
Show Gcode True
Show Position True
Width of Extrusion Thread (pixels): 3
6 changes: 3 additions & 3 deletions profiles/extrusion/PLA/speed.csv
Original file line number Diff line number Diff line change
@@ -8,9 +8,9 @@ Bridge Feed Rate Multiplier (ratio): 1.0
Bridge Flow Rate Multiplier (ratio): 1.0
Duty Cyle at Beginning (portion): 1.0
Duty Cyle at Ending (portion): 0.0
Feed Rate (mm/s): 35.0
Flow Rate Setting (float): 35.0
Feed Rate (mm/s): 36.0
Flow Rate Setting (float): 36.0
Orbital Feed Rate over Operating Feed Rate (ratio): 0.5
Perimeter Feed Rate over Operating Feed Rate (ratio): 0.7
Perimeter Flow Rate over Operating Flow Rate (ratio): 0.7
Travel Feed Rate (mm/s): 50.0
Travel Feed Rate (mm/s): 40.0
6 changes: 3 additions & 3 deletions profiles/extrusion/PLA/statistic.csv
Original file line number Diff line number Diff line change
@@ -1,9 +1,9 @@
Format is tab separated statistic settings.
Name Value
_Name Value
WindowPosition 700+0
Activate Statistic True
Machine Time ($/hour): 1.0
Material ($/kg): 10.0
Machine Time ($/hour): 100.0
Material ($/kg): 800.0
Density (kg/m3): 930.0
Extrusion Diameter over Thickness (ratio): 1.25
Open File to Generate Statistics for
8 changes: 4 additions & 4 deletions profiles/extrusion/PLA/temperature.csv
Original file line number Diff line number Diff line change
@@ -5,10 +5,10 @@ Open File for Temperature
Activate Temperature: True
Cooling Rate (Celcius/second): 3.0
Heating Rate (Celcius/second): 10.0
Base Temperature (Celcius): 195.0
Interface Temperature (Celcius): 195.0
Object First Layer Infill Temperature (Celcius): 195.0
Object First Layer Perimeter Temperature (Celcius): 195.0
Base Temperature (Celcius): 200.0
Interface Temperature (Celcius): 200.0
Object First Layer Infill Temperature (Celcius): 200.0
Object First Layer Perimeter Temperature (Celcius): 200.0
Object Next Layers Temperature (Celcius): 195.0
Support Layers Temperature (Celcius): 195.0
Supported Layers Temperature (Celcius): 195.0
2 changes: 1 addition & 1 deletion profiles/extrusion/PLA/vectorwrite.csv
Original file line number Diff line number Diff line change
@@ -1,5 +1,5 @@
Format is tab separated vectorwrite settings.
Name Value
_Name Value
WindowPosition 700+0
Activate Vectorwrite False
Open File to Write Vector Graphics for
2 changes: 1 addition & 1 deletion profiles/milling.csv
Original file line number Diff line number Diff line change
@@ -1,4 +1,4 @@
Format is tab separated milling settings.
Name Value
_Name Value
WindowPosition 0+400
Profile Selection: end_mill
2 changes: 1 addition & 1 deletion profiles/skeinforge_profile.csv
Original file line number Diff line number Diff line change
@@ -1,5 +1,5 @@
Format is tab separated skeinforge profile settings.
Name Value
_Name Value
WindowPosition 0+200
cutting False
extrusion True
2 changes: 1 addition & 1 deletion profiles/winding.csv
Original file line number Diff line number Diff line change
@@ -1,4 +1,4 @@
Format is tab separated winding settings.
Name Value
_Name Value
WindowPosition 0+400
Profile Selection: free_wire

0 comments on commit ef423df

Please sign in to comment.