regulator: core: add support for configuring turn-on time through con…

…straints The turn-on time of the regulator depends on the regulator device's electrical characteristics. Sometimes regulator turn-on time also depends on the capacitive load on the given platform and it can be more than the datasheet value. The driver provides the enable-time as per datasheet. Add support for configure the enable ramp time through regulator constraints so that regulator core can take this value for enable time for that regulator. Signed-off-by: Laxman Dewangan <[email protected]> Acked-by: Stephen Warren <[email protected]> Signed-off-by: Mark Brown <[email protected]>
CamonZ · Sep 18, 2013 · 00c877c · 00c877c
1 parent 272b98c
commit 00c877c
Show file tree

Hide file tree

Showing 4 changed files with 15 additions and 0 deletions.
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -14,6 +14,11 @@ Optional properties:
 - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
   For hardwares which support disabling ramp rate, it should be explicitly
   intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
+- regulator-enable-ramp-delay: The time taken, in microseconds, for the supply
+  rail to reach the target voltage, plus/minus whatever tolerance the board
+  design requires. This property describes the total system ramp time
+  required due to the combination of internal ramping of the regulator itself,
+  and board design issues such as trace capacitance and load on the supply.
 
 Deprecated properties:
 - regulator-compatible: If a regulator chip contains multiple

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
@@ -1186,6 +1186,8 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 
 static int _regulator_get_enable_time(struct regulator_dev *rdev)
 {
+	if (rdev->constraints && rdev->constraints->enable_time)
+		return rdev->constraints->enable_time;
 	if (!rdev->desc->ops->enable_time)
 		return rdev->desc->enable_time;
 	return rdev->desc->ops->enable_time(rdev);

diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
@@ -23,6 +23,8 @@ static void of_get_regulation_constraints(struct device_node *np,
 	const __be32 *min_uA, *max_uA, *ramp_delay;
 	struct property *prop;
 	struct regulation_constraints *constraints = &(*init_data)->constraints;
+	int ret;
+	u32 pval;
 
 	constraints->name = of_get_property(np, "regulator-name", NULL);
 
@@ -73,6 +75,10 @@ static void of_get_regulation_constraints(struct device_node *np,
 		else
 			constraints->ramp_disable = true;
 	}
+
+	ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
+	if (!ret)
+		constraints->enable_time = pval;
 }
 
 /**

diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
@@ -95,6 +95,7 @@ struct regulator_state {
  * @initial_state: Suspend state to set by default.
  * @initial_mode: Mode to set at startup.
  * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @enable_time: Turn-on time of the rails (unit: microseconds)
  */
 struct regulation_constraints {
 
@@ -129,6 +130,7 @@ struct regulation_constraints {
 	unsigned int initial_mode;
 
 	unsigned int ramp_delay;
+	unsigned int enable_time;
 
 	/* constraint flags */
 	unsigned always_on:1;	/* regulator never off when system is on */