Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <[email protected]>
CamonZ · Jun 15, 2017 · 0ddead9 · 0ddead9
2 parents f7aec12 + a090bd4
commit 0ddead9
Show file tree

Hide file tree

Showing 451 changed files with 3,846 additions and 2,246 deletions.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
@@ -866,6 +866,15 @@
 
 	dscc4.setup=	[NET]
 
+	dt_cpu_ftrs=	[PPC]
+			Format: {"off" | "known"}
+			Control how the dt_cpu_ftrs device-tree binding is
+			used for CPU feature discovery and setup (if it
+			exists).
+			off: Do not use it, fall back to legacy cpu table.
+			known: Do not pass through unknown features to guests
+			or userspace, only those that the kernel is aware of.
+
 	dump_apple_properties	[X86]
 			Dump name and content of EFI device properties on
 			x86 Macs.  Useful for driver authors to determine

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -10,6 +10,7 @@ Required properties:
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
   - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
   - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+  - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
   - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
   - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
   - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;

diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
@@ -122,7 +122,7 @@ associated flow of the packet. The hash is either provided by hardware
 or will be computed in the stack. Capable hardware can pass the hash in
 the receive descriptor for the packet; this would usually be the same
 hash used for RSS (e.g. computed Toeplitz hash). The hash is saved in
-skb->rx_hash and can be used elsewhere in the stack as a hash of the
+skb->hash and can be used elsewhere in the stack as a hash of the
 packet’s flow.
 
 Each receive hardware queue has an associated list of CPUs to which

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -1172,7 +1172,7 @@ N:	clps711x
 
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
 M:	Hartley Sweeten <[email protected]>
-M:	Ryan Mallon <rmallon@gmail.com>
+M:	Alexander Sverdlin <alexander.sverdlin@gmail.com>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ep93xx/
@@ -1489,13 +1489,15 @@ M:	Gregory Clement <[email protected]>
 M:	Sebastian Hesselbarth <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-mvebu/
-F:	drivers/rtc/rtc-armada38x.c
 F:	arch/arm/boot/dts/armada*
 F:	arch/arm/boot/dts/kirkwood*
+F:	arch/arm/configs/mvebu_*_defconfig
+F:	arch/arm/mach-mvebu/
 F:	arch/arm64/boot/dts/marvell/armada*
 F:	drivers/cpufreq/mvebu-cpufreq.c
-F:	arch/arm/configs/mvebu_*_defconfig
+F:	drivers/irqchip/irq-armada-370-xp.c
+F:	drivers/irqchip/irq-mvebu-*
+F:	drivers/rtc/rtc-armada38x.c
 
 ARM/Marvell Berlin SoC support
 M:	Jisheng Zhang <[email protected]>
@@ -1721,7 +1723,6 @@ N:	rockchip
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <[email protected]>
 M:	Krzysztof Kozlowski <[email protected]>
-R:	Javier Martinez Canillas <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 L:	[email protected] (moderated for non-subscribers)
 Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
@@ -1829,7 +1830,6 @@ F:	drivers/edac/altera_edac.
 ARM/STI ARCHITECTURE
 M:	Patrice Chotard <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
-L:	[email protected]
 W:	http://www.stlinux.com
 S:	Maintained
 F:	arch/arm/mach-sti/
@@ -5622,7 +5622,7 @@ F:	scripts/get_maintainer.pl
 
 GENWQE (IBM Generic Workqueue Card)
 M:	Frank Haverkamp <[email protected]>
-M:	Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
+M:	Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
 S:	Supported
 F:	drivers/misc/genwqe/
 
@@ -5667,7 +5667,6 @@ F:	tools/testing/selftests/gpio/
 
 GPIO SUBSYSTEM
 M:	Linus Walleij <[email protected]>
-M:	Alexandre Courbot <[email protected]>
 L:	[email protected]
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
 S:	Maintained
@@ -7708,7 +7707,7 @@ F:	drivers/platform/x86/hp_accel.c
 
 LIVE PATCHING
 M:	Josh Poimboeuf <[email protected]>
-M:	Jessica Yu <jeyu@redhat.com>
+M:	Jessica Yu <jeyu@kernel.org>
 M:	Jiri Kosina <[email protected]>
 M:	Miroslav Benes <[email protected]>
 R:	Petr Mladek <[email protected]>
@@ -8623,7 +8622,7 @@ S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*
 
 MODULE SUPPORT
-M:	Jessica Yu <jeyu@redhat.com>
+M:	Jessica Yu <jeyu@kernel.org>
 M:	Rusty Russell <[email protected]>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
 S:	Maintained
@@ -11311,7 +11310,6 @@ F:	drivers/media/rc/serial_ir.c
 
 STI CEC DRIVER
 M:	Benjamin Gaignard <[email protected]>
-L:	[email protected]
 S:	Maintained
 F:	drivers/staging/media/st-cec/
 F:	Documentation/devicetree/bindings/media/stih-cec.txt
@@ -11821,6 +11819,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 S:	Supported
 F:	arch/arm/mach-davinci/
 F:	drivers/i2c/busses/i2c-davinci.c
+F:	arch/arm/boot/dts/da850*
 
 TI DAVINCI SERIES MEDIA DRIVER
 M:	"Lad, Prabhakar" <[email protected]>
@@ -13904,7 +13903,7 @@ S:	Odd fixes
 F:	drivers/net/wireless/wl3501*
 
 WOLFSON MICROELECTRONICS DRIVERS
-L:	patches@opensource.wolfsonmicro.com
+L:	patches@opensource.cirrus.com
 T:	git https://github.com/CirrusLogic/linux-drivers.git
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
@@ -3,6 +3,11 @@
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
 
+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
 /* This include file covers the common peripherals and configuration between
  * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
  * bcm2835.dtsi and bcm2836.dtsi.

diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -137,8 +137,8 @@ netcp: netcp@26000000 {
 	/* NetCP address range */
 	ranges = <0 0x26000000 0x1000000>;
 
-	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>;
-	clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk";
+	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
+	clock-names = "pa_clk", "ethss_clk", "cpts";
 	dma-coherent;
 
 	ti,navigator-dmas = <&dma_gbe 0>,

diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -232,6 +232,14 @@
 			};
 		};
 
+		osr: sram@70000000 {
+			compatible = "mmio-sram";
+			reg = <0x70000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clkosr>;
+		};
+
 		dspgpio0: keystone_dsp_gpio@02620240 {
 			compatible = "ti,keystone-dsp-gpio";
 			gpio-controller;

diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
@@ -1,4 +1,4 @@
-#include <versatile-ab.dts>
+#include "versatile-ab.dts"
 
 / {
 	model = "ARM Versatile PB";

diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
@@ -19,7 +19,8 @@ struct dev_archdata {
 #ifdef CONFIG_XEN
 	const struct dma_map_ops *dev_dma_ops;
 #endif
-	bool dma_coherent;
+	unsigned int dma_coherent:1;
+	unsigned int dma_ops_setup:1;
 };
 
 struct omap_device;

diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S
@@ -104,16 +104,15 @@ __do_hyp_init:
 	@  - Write permission implies XN: disabled
 	@  - Instruction cache: enabled
 	@  - Data/Unified cache: enabled
-	@  - Memory alignment checks: enabled
 	@  - MMU: enabled (this code must be run from an identity mapping)
 	mrc	p15, 4, r0, c1, c0, 0	@ HSCR
 	ldr	r2, =HSCTLR_MASK
 	bic	r0, r0, r2
 	mrc	p15, 0, r1, c1, c0, 0	@ SCTLR
 	ldr	r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
 	and	r1, r1, r2
- ARM(	ldr	r2, =(HSCTLR_M | HSCTLR_A)			)
- THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE)		)
+ ARM(	ldr	r2, =(HSCTLR_M)					)
+ THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_TE)			)
 	orr	r1, r1, r2
 	orr	r0, r0, r1
 	mcr	p15, 4, r0, c1, c0, 0	@ HSCR

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
@@ -1,6 +1,7 @@
 menuconfig ARCH_AT91
 	bool "Atmel SoCs"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
+	select ARM_CPU_SUSPEND if PM
 	select COMMON_CLK_AT91
 	select GPIOLIB
 	select PINCTRL

diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
@@ -153,14 +153,19 @@ int __init davinci_pm_init(void)
 	davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL);
 	if (!davinci_sram_suspend) {
 		pr_err("PM: cannot allocate SRAM memory\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto no_sram_mem;
 	}
 
 	davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend,
 						davinci_cpu_suspend_sz);
 
 	suspend_set_ops(&davinci_pm_ops);
 
+	return 0;
+
+no_sram_mem:
+	iounmap(pm_config.ddrpsc_reg_base);
 no_ddrpsc_mem:
 	iounmap(pm_config.ddrpll_reg_base);
 no_ddrpll_mem:

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
@@ -2311,7 +2311,14 @@ int arm_iommu_attach_device(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(arm_iommu_attach_device);
 
-static void __arm_iommu_detach_device(struct device *dev)
+/**
+ * arm_iommu_detach_device
+ * @dev: valid struct device pointer
+ *
+ * Detaches the provided device from a previously attached map.
+ * This voids the dma operations (dma_map_ops pointer)
+ */
+void arm_iommu_detach_device(struct device *dev)
 {
 	struct dma_iommu_mapping *mapping;
 
@@ -2324,22 +2331,10 @@ static void __arm_iommu_detach_device(struct device *dev)
 	iommu_detach_device(mapping->domain, dev);
 	kref_put(&mapping->kref, release_iommu_mapping);
 	to_dma_iommu_mapping(dev) = NULL;
+	set_dma_ops(dev, NULL);
 
 	pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev));
 }
-
-/**
- * arm_iommu_detach_device
- * @dev: valid struct device pointer
- *
- * Detaches the provided device from a previously attached map.
- * This voids the dma operations (dma_map_ops pointer)
- */
-void arm_iommu_detach_device(struct device *dev)
-{
-	__arm_iommu_detach_device(dev);
-	set_dma_ops(dev, NULL);
-}
 EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
 
 static const struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent)
@@ -2379,7 +2374,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev)
 	if (!mapping)
 		return;
 
-	__arm_iommu_detach_device(dev);
+	arm_iommu_detach_device(dev);
 	arm_iommu_release_mapping(mapping);
 }
 
@@ -2430,9 +2425,13 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 		dev->dma_ops = xen_dma_ops;
 	}
 #endif
+	dev->archdata.dma_ops_setup = true;
 }
 
 void arch_teardown_dma_ops(struct device *dev)
 {
+	if (!dev->archdata.dma_ops_setup)
+		return;
+
 	arm_teardown_iommu_dma_ops(dev);
 }
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
@@ -1084,10 +1084,6 @@ config SYSVIPC_COMPAT
 	def_bool y
 	depends on COMPAT && SYSVIPC
 
-config KEYS_COMPAT
-	def_bool y
-	depends on COMPAT && KEYS
-
 endmenu
 
 menu "Power management options"

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -231,8 +231,7 @@
 			cpm_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
-				| IRQ_TYPE_LEVEL_HIGH)>,
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -221,8 +221,7 @@
 			cps_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
-				| IRQ_TYPE_LEVEL_HIGH)>,
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,