Skip to content

Commit

Permalink
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/ker…
Browse files Browse the repository at this point in the history 
…nel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:

 - A relatively large patch restores booting on i.MX platforms that
   failed to boot after a cleanup was merged for v4.10.

 - A quirk for USB needs to be enabled on the STi platform

 - On the Meson platform, we saw memory corruption with part of the
   memory used by the secure monitor, so we have to stay out of that
   area.

 - The same platform also has a problem with ethernet under load, which
   is fixed by disabling EEE negotiation.

 - imx6dl has an incorrect pin configuration, which prevents SPI from
   working.

 - Two maintainers have lost their access to their email addresses, so
   we should update the MAINTAINERS file before the release

 - Renaming one of the orion5x linkstation models to help simplify the
   debian install.

 - A couple of fixes for build warnings that were introduced during
   v4.10-rc.

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in
  MAINTAINERS: socfpga: update email for Dinh Nguyen
  ARM: orion5x: fix Makefile for linkstation-lschl.dtb
  ARM: dts: orion5x-lschl: More consistent naming on linkstation series
  ARM: dts: orion5x-lschl: Fix model name
  MAINTAINERS: change email address from atmel to microchip
  MAINTAINERS: at91: change email address
  ARM64: dts: meson-gx: Add firmware reserved memory zones
  ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage
  ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk
  ARM: dts: imx: Pass 'chosen' and 'memory' nodes
  ARM: dts: imx6dl: fix GPIO4 range
  ARM: imx: hide unused variable in #ifdef
  • Loading branch information
@torvalds
torvalds committed Feb 8, 2017
2 parents d3498fb + 5aff1d2 commit 472ff5b
Show file tree
Hide file tree
Showing 25 changed files with 178 additions and 27 deletions.
36 changes: 18 additions & 18 deletions MAINTAINERS
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1091,7 +1091,7 @@ F: arch/arm/boot/dts/aspeed-*
F: drivers/*/*aspeed*

ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Nicolas Ferre <nicolas.ferre@microchip.com>
M: Alexandre Belloni <[email protected]>
M: Jean-Christophe Plagniol-Villard <[email protected]>
L: [email protected] (moderated for non-subscribers)
Expand Down Expand Up @@ -1773,7 +1773,7 @@ F: drivers/soc/renesas/
F: include/linux/soc/renesas/

ARM/SOCFPGA ARCHITECTURE
M: Dinh Nguyen <dinguyen@opensource.altera.com>
M: Dinh Nguyen <dinguyen@kernel.org>
S: Maintained
F: arch/arm/mach-socfpga/
F: arch/arm/boot/dts/socfpga*
Expand All @@ -1783,7 +1783,7 @@ W: http://www.rocketboards.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git

ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
M: Dinh Nguyen <dinguyen@opensource.altera.com>
M: Dinh Nguyen <dinguyen@kernel.org>
S: Maintained
F: drivers/clk/socfpga/

Expand Down Expand Up @@ -2175,56 +2175,56 @@ F: include/linux/atm*
F: include/uapi/linux/atm*

ATMEL AT91 / AT32 MCI DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
M: Ludovic Desroches <ludovic.desroches@microchip.com>
S: Maintained
F: drivers/mmc/host/atmel-mci.c

ATMEL AT91 SAMA5D2-Compatible Shutdown Controller
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Nicolas Ferre <nicolas.ferre@microchip.com>
S: Supported
F: drivers/power/reset/at91-sama5d2_shdwc.c

ATMEL SAMA5D2 ADC DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: [email protected]
S: Supported
F: drivers/iio/adc/at91-sama5d2_adc.c

ATMEL Audio ALSA driver
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Nicolas Ferre <nicolas.ferre@microchip.com>
L: [email protected] (moderated for non-subscribers)
S: Supported
F: sound/soc/atmel

ATMEL XDMA DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: [email protected]
L: [email protected]
S: Supported
F: drivers/dma/at_xdmac.c

ATMEL I2C DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: [email protected]
S: Supported
F: drivers/i2c/busses/i2c-at91.c

ATMEL ISI DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: [email protected]
S: Supported
F: drivers/media/platform/soc_camera/atmel-isi.c
F: include/media/atmel-isi.h

ATMEL LCDFB DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Nicolas Ferre <nicolas.ferre@microchip.com>
L: [email protected]
S: Maintained
F: drivers/video/fbdev/atmel_lcdfb.c
F: include/video/atmel_lcdc.h

ATMEL MACB ETHERNET DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Nicolas Ferre <nicolas.ferre@microchip.com>
S: Supported
F: drivers/net/ethernet/cadence/

Expand All @@ -2236,32 +2236,32 @@ S: Supported
F: drivers/mtd/nand/atmel_nand*

ATMEL SDMMC DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: [email protected]
S: Supported
F: drivers/mmc/host/sdhci-of-at91.c

ATMEL SPI DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Nicolas Ferre <nicolas.ferre@microchip.com>
S: Supported
F: drivers/spi/spi-atmel.*

ATMEL SSC DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Nicolas Ferre <nicolas.ferre@microchip.com>
L: [email protected] (moderated for non-subscribers)
S: Supported
F: drivers/misc/atmel-ssc.c
F: include/linux/atmel-ssc.h

ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Nicolas Ferre <nicolas.ferre@microchip.com>
L: [email protected] (moderated for non-subscribers)
S: Supported
F: drivers/misc/atmel_tclib.c
F: drivers/clocksource/tcb_clksrc.c

ATMEL USBA UDC DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Nicolas Ferre <nicolas.ferre@microchip.com>
L: [email protected] (moderated for non-subscribers)
S: Supported
F: drivers/usb/gadget/udc/atmel_usba_udc.*
Expand Down Expand Up @@ -9736,7 +9736,7 @@ S: Maintained
F: drivers/pinctrl/pinctrl-at91.*

PIN CONTROLLER - ATMEL AT91 PIO4
M: Ludovic Desroches <ludovic.desroches@atmel.com>
M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: [email protected] (moderated for non-subscribers)
L: [email protected]
S: Supported
Expand Down
2 changes: 1 addition & 1 deletion arch/arm/boot/dts/Makefile
View file
Original file line number Diff line number Diff line change
Expand Up @@ -617,7 +617,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
orion5x-linkstation-lsgl.dtb \
orion5x-linkstation-lswtgl.dtb \
orion5x-lschl.dtb \
orion5x-linkstation-lschl.dtb \
orion5x-lswsgl.dtb \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-netgear-wnr854t.dtb \
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx1.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -18,6 +18,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
gpio0 = &gpio1;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx23.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -16,6 +16,14 @@
#size-cells = <1>;

interrupt-parent = <&icoll>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
gpio0 = &gpio0;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx25.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -14,6 +14,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &fec;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx27.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -19,6 +19,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &fec;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx28.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -17,6 +17,14 @@
#size-cells = <1>;

interrupt-parent = <&icoll>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &mac0;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx31.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
serial0 = &uart1;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx35.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -13,6 +13,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &fec;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx50.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -17,6 +17,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &fec;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx51.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -19,6 +19,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &fec;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx53.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -19,6 +19,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &fec;
Expand Down
2 changes: 1 addition & 1 deletion arch/arm/boot/dts/imx6dl.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -137,7 +137,7 @@
&gpio4 {
gpio-ranges = <&iomuxc 5 136 1>, <&iomuxc 6 145 1>, <&iomuxc 7 150 1>,
<&iomuxc 8 146 1>, <&iomuxc 9 151 1>, <&iomuxc 10 147 1>,
<&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
<&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
<&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16 39 7>,
<&iomuxc 23 56 1>, <&iomuxc 24 61 7>, <&iomuxc 31 46 1>;
};
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx6qdl.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -16,6 +16,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &fec;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx6sl.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -14,6 +14,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &fec;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx6sx.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -15,6 +15,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
can0 = &flexcan1;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx6ul.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -15,6 +15,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
ethernet0 = &fec1;
Expand Down
8 changes: 8 additions & 0 deletions arch/arm/boot/dts/imx7s.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -50,6 +50,14 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };

aliases {
gpio0 = &gpio1;
Expand Down
Loading

0 comments on commit 472ff5b

Please sign in to comment.