Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/arm/arm-soc

Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...

Documentation/arm/CCN.txt

@@ -33,20 +33,23 @@ directory, with first 8 configurable by user and additional
 Cycle counter is described by a "type" value 0xff and does
 not require any other settings.
 
+The driver also provides a "cpumask" sysfs attribute, which contains
+a single CPU ID, of the processor which will be used to handle all
+the CCN PMU events. It is recommended that the user space tools
+request the events on this processor (if not, the perf_event->cpu value
+will be overwritten anyway). In case of this processor being offlined,
+the events are migrated to another one and the attribute is updated.
+
 Example of perf tool use:
 
 / # perf list | grep ccn
   ccn/cycles/                                        [Kernel PMU event]
 <...>
-  ccn/xp_valid_flit/                                 [Kernel PMU event]
+  ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/          [Kernel PMU event]
 <...>
 
-/ # perf stat -C 0 -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+/ # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
                                                                        sleep 1
 
 The driver does not support sampling, therefore "perf record" will
-not work. Also notice that only single cpu is being selected
-("-C 0") - this is because perf framework does not support
-"non-CPU related" counters (yet?) so system-wide session ("-a")
-would try (and in most cases fail) to set up the same event
-per each CPU.
+not work. Per-task (without "-a") perf sessions are not supported.

Documentation/devicetree/bindings/arm/cci.txt

@@ -31,8 +31,9 @@ specific to ARM.
 	- compatible
 		Usage: required
 		Value type: <string>
-		Definition: must be set to
+		Definition: must contain one of the following:
 			    "arm,cci-400"
+			    "arm,cci-500"
 
 	- reg
 		Usage: required
@@ -99,6 +100,7 @@ specific to ARM.
 				 "arm,cci-400-pmu,r1"
 				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
 						      secure acces to CCI registers
+				 "arm,cci-500-pmu,r0"
 		- reg:
 			Usage: required
 			Value type: Integer cells. A register entry, expressed

Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt

@@ -1,6 +1,9 @@
 NVIDIA Tegra Memory Controller device tree bindings
 ===================================================
 
+memory-controller node
+----------------------
+
 Required properties:
 - compatible: Should be "nvidia,tegra<chip>-mc"
 - reg: Physical base address and length of the controller's registers.
@@ -15,9 +18,49 @@ Required properties:
 This device implements an IOMMU that complies with the generic IOMMU binding.
 See ../iommu/iommu.txt for details.
 
-Example:
---------
+emc-timings subnode
+-------------------
+
+The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in
+register PMC_STRAPPING_OPT_A).
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for.
+
+timing subnode
+--------------
+
+Each "emc-timings" node should contain a subnode for every supported EMC clock rate.
+
+Required properties for timing nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC
+(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be
+specified, according to the board documentation:
+
+	MC_EMEM_ARB_CFG
+	MC_EMEM_ARB_OUTSTANDING_REQ
+	MC_EMEM_ARB_TIMING_RCD
+	MC_EMEM_ARB_TIMING_RP
+	MC_EMEM_ARB_TIMING_RC
+	MC_EMEM_ARB_TIMING_RAS
+	MC_EMEM_ARB_TIMING_FAW
+	MC_EMEM_ARB_TIMING_RRD
+	MC_EMEM_ARB_TIMING_RAP2PRE
+	MC_EMEM_ARB_TIMING_WAP2PRE
+	MC_EMEM_ARB_TIMING_R2R
+	MC_EMEM_ARB_TIMING_W2W
+	MC_EMEM_ARB_TIMING_R2W
+	MC_EMEM_ARB_TIMING_W2R
+	MC_EMEM_ARB_DA_TURNS
+	MC_EMEM_ARB_DA_COVERS
+	MC_EMEM_ARB_MISC0
+	MC_EMEM_ARB_MISC1
+	MC_EMEM_ARB_RING1_THROTTLE
 
+Example SoC include file:
+
+/ {
 	mc: memory-controller@0,70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
@@ -34,3 +77,40 @@ Example:
 		...
 		iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
 	};
+};
+
+Example board file:
+
+/ {
+	memory-controller@0,70019000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+};