block: Move power management code into a new source file

Move the code for runtime power management from blk-core.c into the new source file blk-pm.c. Move the corresponding declarations from <linux/blkdev.h> into <linux/blk-pm.h>. For CONFIG_PM=n, leave out the declarations of the functions that are not used in that mode. This patch not only reduces the number of #ifdefs in the block layer core code but also reduces the size of header file <linux/blkdev.h> and hence should help to reduce the build time of the Linux kernel if CONFIG_PM is not defined. Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Jianchao Wang <[email protected]> Cc: Hannes Reinecke <[email protected]> Cc: Johannes Thumshirn <[email protected]> Cc: Alan Stern <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
CarlFK · Sep 26, 2018 · bca6b06 · bca6b06
1 parent 3cfa210
commit bca6b06
Show file tree

Hide file tree

Showing 11 changed files with 264 additions and 239 deletions.
diff --git a/block/Kconfig b/block/Kconfig
@@ -228,4 +228,7 @@ config BLK_MQ_RDMA
 	depends on BLOCK && INFINIBAND
 	default y
 
+config BLK_PM
+	def_bool BLOCK && PM
+
 source block/Kconfig.iosched
diff --git a/block/Makefile b/block/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_BLK_WBT)		+= blk-wbt.o
 obj-$(CONFIG_BLK_DEBUG_FS)	+= blk-mq-debugfs.o
 obj-$(CONFIG_BLK_DEBUG_FS_ZONED)+= blk-mq-debugfs-zoned.o
 obj-$(CONFIG_BLK_SED_OPAL)	+= sed-opal.o
+obj-$(CONFIG_BLK_PM)		+= blk-pm.o
diff --git a/block/blk-core.c b/block/blk-core.c
@@ -42,6 +42,7 @@
 #include "blk.h"
 #include "blk-mq.h"
 #include "blk-mq-sched.h"
+#include "blk-pm.h"
 #include "blk-rq-qos.h"
 
 #ifdef CONFIG_DEBUG_FS
@@ -1726,16 +1727,6 @@ void part_round_stats(struct request_queue *q, int cpu, struct hd_struct *part)
 }
 EXPORT_SYMBOL_GPL(part_round_stats);
 
-#ifdef CONFIG_PM
-static void blk_pm_put_request(struct request *rq)
-{
-	if (rq->q->dev && !(rq->rq_flags & RQF_PM) && !--rq->q->nr_pending)
-		pm_runtime_mark_last_busy(rq->q->dev);
-}
-#else
-static inline void blk_pm_put_request(struct request *rq) {}
-#endif
-
 void __blk_put_request(struct request_queue *q, struct request *req)
 {
 	req_flags_t rq_flags = req->rq_flags;
@@ -3757,191 +3748,6 @@ void blk_finish_plug(struct blk_plug *plug)
 }
 EXPORT_SYMBOL(blk_finish_plug);
 
-#ifdef CONFIG_PM
-/**
- * blk_pm_runtime_init - Block layer runtime PM initialization routine
- * @q: the queue of the device
- * @dev: the device the queue belongs to
- *
- * Description:
- *    Initialize runtime-PM-related fields for @q and start auto suspend for
- *    @dev. Drivers that want to take advantage of request-based runtime PM
- *    should call this function after @dev has been initialized, and its
- *    request queue @q has been allocated, and runtime PM for it can not happen
- *    yet(either due to disabled/forbidden or its usage_count > 0). In most
- *    cases, driver should call this function before any I/O has taken place.
- *
- *    This function takes care of setting up using auto suspend for the device,
- *    the autosuspend delay is set to -1 to make runtime suspend impossible
- *    until an updated value is either set by user or by driver. Drivers do
- *    not need to touch other autosuspend settings.
- *
- *    The block layer runtime PM is request based, so only works for drivers
- *    that use request as their IO unit instead of those directly use bio's.
- */
-void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
-{
-	/* Don't enable runtime PM for blk-mq until it is ready */
-	if (q->mq_ops) {
-		pm_runtime_disable(dev);
-		return;
-	}
-
-	q->dev = dev;
-	q->rpm_status = RPM_ACTIVE;
-	pm_runtime_set_autosuspend_delay(q->dev, -1);
-	pm_runtime_use_autosuspend(q->dev);
-}
-EXPORT_SYMBOL(blk_pm_runtime_init);
-
-/**
- * blk_pre_runtime_suspend - Pre runtime suspend check
- * @q: the queue of the device
- *
- * Description:
- *    This function will check if runtime suspend is allowed for the device
- *    by examining if there are any requests pending in the queue. If there
- *    are requests pending, the device can not be runtime suspended; otherwise,
- *    the queue's status will be updated to SUSPENDING and the driver can
- *    proceed to suspend the device.
- *
- *    For the not allowed case, we mark last busy for the device so that
- *    runtime PM core will try to autosuspend it some time later.
- *
- *    This function should be called near the start of the device's
- *    runtime_suspend callback.
- *
- * Return:
- *    0		- OK to runtime suspend the device
- *    -EBUSY	- Device should not be runtime suspended
- */
-int blk_pre_runtime_suspend(struct request_queue *q)
-{
-	int ret = 0;
-
-	if (!q->dev)
-		return ret;
-
-	spin_lock_irq(q->queue_lock);
-	if (q->nr_pending) {
-		ret = -EBUSY;
-		pm_runtime_mark_last_busy(q->dev);
-	} else {
-		q->rpm_status = RPM_SUSPENDING;
-	}
-	spin_unlock_irq(q->queue_lock);
-	return ret;
-}
-EXPORT_SYMBOL(blk_pre_runtime_suspend);
-
-/**
- * blk_post_runtime_suspend - Post runtime suspend processing
- * @q: the queue of the device
- * @err: return value of the device's runtime_suspend function
- *
- * Description:
- *    Update the queue's runtime status according to the return value of the
- *    device's runtime suspend function and mark last busy for the device so
- *    that PM core will try to auto suspend the device at a later time.
- *
- *    This function should be called near the end of the device's
- *    runtime_suspend callback.
- */
-void blk_post_runtime_suspend(struct request_queue *q, int err)
-{
-	if (!q->dev)
-		return;
-
-	spin_lock_irq(q->queue_lock);
-	if (!err) {
-		q->rpm_status = RPM_SUSPENDED;
-	} else {
-		q->rpm_status = RPM_ACTIVE;
-		pm_runtime_mark_last_busy(q->dev);
-	}
-	spin_unlock_irq(q->queue_lock);
-}
-EXPORT_SYMBOL(blk_post_runtime_suspend);
-
-/**
- * blk_pre_runtime_resume - Pre runtime resume processing
- * @q: the queue of the device
- *
- * Description:
- *    Update the queue's runtime status to RESUMING in preparation for the
- *    runtime resume of the device.
- *
- *    This function should be called near the start of the device's
- *    runtime_resume callback.
- */
-void blk_pre_runtime_resume(struct request_queue *q)
-{
-	if (!q->dev)
-		return;
-
-	spin_lock_irq(q->queue_lock);
-	q->rpm_status = RPM_RESUMING;
-	spin_unlock_irq(q->queue_lock);
-}
-EXPORT_SYMBOL(blk_pre_runtime_resume);
-
-/**
- * blk_post_runtime_resume - Post runtime resume processing
- * @q: the queue of the device
- * @err: return value of the device's runtime_resume function
- *
- * Description:
- *    Update the queue's runtime status according to the return value of the
- *    device's runtime_resume function. If it is successfully resumed, process
- *    the requests that are queued into the device's queue when it is resuming
- *    and then mark last busy and initiate autosuspend for it.
- *
- *    This function should be called near the end of the device's
- *    runtime_resume callback.
- */
-void blk_post_runtime_resume(struct request_queue *q, int err)
-{
-	if (!q->dev)
-		return;
-
-	spin_lock_irq(q->queue_lock);
-	if (!err) {
-		q->rpm_status = RPM_ACTIVE;
-		__blk_run_queue(q);
-		pm_runtime_mark_last_busy(q->dev);
-		pm_request_autosuspend(q->dev);
-	} else {
-		q->rpm_status = RPM_SUSPENDED;
-	}
-	spin_unlock_irq(q->queue_lock);
-}
-EXPORT_SYMBOL(blk_post_runtime_resume);
-
-/**
- * blk_set_runtime_active - Force runtime status of the queue to be active
- * @q: the queue of the device
- *
- * If the device is left runtime suspended during system suspend the resume
- * hook typically resumes the device and corrects runtime status
- * accordingly. However, that does not affect the queue runtime PM status
- * which is still "suspended". This prevents processing requests from the
- * queue.
- *
- * This function can be used in driver's resume hook to correct queue
- * runtime PM status and re-enable peeking requests from the queue. It
- * should be called before first request is added to the queue.
- */
-void blk_set_runtime_active(struct request_queue *q)
-{
-	spin_lock_irq(q->queue_lock);
-	q->rpm_status = RPM_ACTIVE;
-	pm_runtime_mark_last_busy(q->dev);
-	pm_request_autosuspend(q->dev);
-	spin_unlock_irq(q->queue_lock);
-}
-EXPORT_SYMBOL(blk_set_runtime_active);
-#endif
-
 int __init blk_dev_init(void)
 {
 	BUILD_BUG_ON(REQ_OP_LAST >= (1 << REQ_OP_BITS));