Merge tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "This was delayed a day or two by some build-breakage on old toolchains
  which we've now fixed.

  There's two PCI commits both acked by Bjorn.

  There's one commit to mm/hugepage.c which is (co)authored by Kirill.

  Highlights:
   - Restructure Linux PTE on Book3S/64 to Radix format from Paul
     Mackerras
   - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh
     Kumar K.V
   - Add POWER9 cputable entry from Michael Neuling
   - FPU/Altivec/VSX save/restore optimisations from Cyril Bur
   - Add support for new ftrace ABI on ppc64le from Torsten Duwe

  Various cleanups & minor fixes from:
   - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy,
     Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell
     Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh.

  General:
   - atomics: Allow architectures to define their own __atomic_op_*
     helpers from Boqun Feng
   - Implement atomic{, 64}_*_return_* variants and acquire/release/
     relaxed variants for (cmp)xchg from Boqun Feng
   - Add powernv_defconfig from Jeremy Kerr
   - Fix BUG_ON() reporting in real mode from Balbir Singh
   - Add xmon command to dump OPAL msglog from Andrew Donnellan
   - Add xmon command to dump process/task similar to ps(1) from Douglas
     Miller
   - Clean up memory hotplug failure paths from David Gibson

  pci/eeh:
   - Redesign SR-IOV on PowerNV to give absolute isolation between VFs
     from Wei Yang.
   - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
   - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
   - PCI: Add pcibios_bus_add_device() weak function from Wei Yang
   - MAINTAINERS: Update EEH details and maintainership from Russell
     Currey

  cxl:
   - Support added to the CXL driver for running on both bare-metal and
     hypervisor systems, from Christophe Lombard and Frederic Barrat.
   - Ignore probes for virtual afu pci devices from Vaibhav Jain

  perf:
   - Export Power8 generic and cache events to sysfs from Sukadev
     Bhattiprolu
   - hv-24x7: Fix usage with chip events, display change in counter
     values, display domain indices in sysfs, eliminate domain suffix in
     event names, from Sukadev Bhattiprolu

  Freescale:
   - Updates from Scott: "Highlights include 8xx optimizations, 32-bit
     checksum optimizations, 86xx consolidation, e5500/e6500 cpu
     hotplug, more fman and other dt bits, and minor fixes/cleanup"

* tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
  powerpc: Fix unrecoverable SLB miss during restore_math()
  powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers
  powerpc/rcpm: Fix build break when SMP=n
  powerpc/book3e-64: Use hardcoded mttmr opcode
  powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible
  powerpc/T104xRDB: add tdm riser card node to device tree
  powerpc32: PAGE_EXEC required for inittext
  powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree
  powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)
  powerpc/86xx: Introduce and use common dtsi
  powerpc/86xx: Update device tree
  powerpc/86xx: Move dts files to fsl directory
  powerpc/86xx: Switch to kconfig fragments approach
  powerpc/86xx: Update defconfigs
  powerpc/86xx: Consolidate common platform code
  powerpc32: Remove one insn in mulhdu
  powerpc32: small optimisation in flush_icache_range()
  powerpc: Simplify test in __dma_sync()
  powerpc32: move xxxxx_dcache_range() functions inline
  powerpc32: Remove clear_pages() and define clear_page() inline
  ...

Documentation/ABI/testing/sysfs-class-cxl

@@ -159,7 +159,7 @@ Description:    read only
                 Decimal value of the Per Process MMIO space length.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<afu>m/pp_mmio_off
+What:           /sys/class/cxl/<afu>m/pp_mmio_off (not in a guest)
 Date:           September 2014
 Contact:        [email protected]
 Description:    read only
@@ -183,7 +183,7 @@ Description:    read only
                 Identifies the revision level of the PSL.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<card>/base_image
+What:           /sys/class/cxl/<card>/base_image (not in a guest)
 Date:           September 2014
 Contact:        [email protected]
 Description:    read only
@@ -193,15 +193,15 @@ Description:    read only
                 during the initial program load.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<card>/image_loaded
+What:           /sys/class/cxl/<card>/image_loaded (not in a guest)
 Date:           September 2014
 Contact:        [email protected]
 Description:    read only
                 Will return "user" or "factory" depending on the image loaded
                 onto the card.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<card>/load_image_on_perst
+What:           /sys/class/cxl/<card>/load_image_on_perst (not in a guest)
 Date:           December 2014
 Contact:        [email protected]
 Description:    read/write
@@ -224,7 +224,7 @@ Description:    write only
                 to reload the FPGA depending on load_image_on_perst.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:		/sys/class/cxl/<card>/perst_reloads_same_image
+What:		/sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)
 Date:		July 2015
 Contact:	[email protected]
 Description:	read/write

Documentation/devicetree/bindings/powerpc/fsl/fman.txt

@@ -315,6 +315,16 @@ PROPERTIES
 		Value type: <phandle>
 		Definition: A phandle for 1EEE1588 timer.
 
+- pcsphy-handle
+		Usage required for "fsl,fman-memac" MACs
+		Value type: <phandle>
+		Definition: A phandle for pcsphy.
+
+- tbi-handle
+		Usage required for "fsl,fman-dtsec" MACs
+		Value type: <phandle>
+		Definition: A phandle for tbiphy.
+
 EXAMPLE
 
 fman1_tx28: port@a8000 {
@@ -340,6 +350,7 @@ ethernet@e0000 {
 	reg = <0xe0000 0x1000>;
 	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
 	ptp-timer = <&ptp-timer>;
+	tbi-handle = <&tbi0>;
 };
 
 ============================================================================
@@ -415,6 +426,13 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+For internal PHY device on internal mdio bus, a PHY node should be created.
+See the definition of the PHY node in booting-without-of.txt for an
+example of how to define a PHY (Internal PHY has no interrupt line).
+- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
+  PCS PHY addr must be '0'.
+
 EXAMPLE
 
 Example for FMan v2 external MDIO:
@@ -425,12 +443,29 @@ mdio@f1000 {
 	interrupts = <101 2 0 0>;
 };
 
+Example for FMan v2 internal MDIO:
+
+mdio@e3120 {
+	compatible = "fsl,fman-mdio";
+	reg = <0xe3120 0xee0>;
+	fsl,fman-internal-mdio;
+
+	tbi1: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
 Example for FMan v3 internal MDIO:
 
 mdio@f1000 {
 	compatible = "fsl,fman-memac-mdio";
 	reg = <0xf1000 0x1000>;
 	fsl,fman-internal-mdio;
+
+	pcsphy6: ethernet-phy@0 {
+		reg = <0x0>;
+	};
 };
 
 =============================================================================
@@ -568,34 +603,39 @@ fman@400000 {
 		cell-index = <0>;
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+		tbi-handle = <&tbi5>;
 	};
 
 	ethernet@e2000 {
 		compatible = "fsl,fman-dtsec";
 		cell-index = <1>;
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
+		tbi-handle = <&tbi6>;
 	};
 
 	ethernet@e4000 {
 		compatible = "fsl,fman-dtsec";
 		cell-index = <2>;
 		reg = <0xe4000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
+		tbi-handle = <&tbi7>;
 	};
 
 	ethernet@e6000 {
 		compatible = "fsl,fman-dtsec";
 		cell-index = <3>;
 		reg = <0xe6000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
+		tbi-handle = <&tbi8>;
 	};
 
 	ethernet@e8000 {
 		compatible = "fsl,fman-dtsec";
 		cell-index = <4>;
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
+		tbi-handle = <&tbi9>;
 
 	ethernet@f0000 {
 		cell-index = <8>;

Documentation/devicetree/bindings/soc/fsl/rcpm.txt

@@ -0,0 +1,63 @@
+* Run Control and Power Management
+-------------------------------------------
+The RCPM performs all device-level tasks associated with device run control
+and power management.
+
+Required properites:
+  - reg : Offset and length of the register set of the RCPM block.
+  - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
+	fsl,rcpm-wakeup property.
+  - compatible : Must contain a chip-specific RCPM block compatible string
+	and (if applicable) may contain a chassis-version RCPM compatible
+	string. Chip-specific strings are of the form "fsl,<chip>-rcpm",
+	such as:
+	* "fsl,p2041-rcpm"
+	* "fsl,p5020-rcpm"
+	* "fsl,t4240-rcpm"
+
+	Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>",
+	such as:
+	* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
+	* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
+	* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+
+All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+which the chip complies.
+Chassis Version		Example Chips
+---------------		-------------------------------
+1.0				p4080, p5020, p5040, p2041, p3041
+2.0				t4240, b4860, b4420
+2.1				t1040, ls1021
+
+Example:
+The RCPM node for T4240:
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+		fsl,#rcpm-wakeup-cells = <2>;
+	};
+
+* Freescale RCPM Wakeup Source Device Tree Bindings
+-------------------------------------------
+Required fsl,rcpm-wakeup property should be added to a device node if the device
+can be used as a wakeup source.
+
+  - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
+	register cells. The number of IPPDEXPCR register cells is defined in
+	"fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is
+	the bit mask that should be set in IPPDEXPCR0, and the second register
+	cell is for IPPDEXPCR1, and so on.
+
+	Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
+	mechanism for keeping certain blocks awake during STANDBY and MEM, in
+	order to use them as wake-up sources.
+
+Example:
+	lpuart0: serial@2950000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2950000 0x0 0x1000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sysclk>;
+		clock-names = "ipg";
+		fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
+	};

Documentation/kernel-parameters.txt

@@ -2620,7 +2620,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
 
 	noltlbs		[PPC] Do not use large page/tlb entries for kernel
-			lowmem mapping on PPC40x.
+			lowmem mapping on PPC40x and PPC8xx
 
 	nomca		[IA-64] Disable machine check abort handling
 

Documentation/powerpc/cxl.txt

@@ -116,6 +116,8 @@ Work Element Descriptor (WED)
 User API
 ========
 
+1. AFU character devices
+
     For AFUs operating in AFU directed mode, two character device
     files will be created. /dev/cxl/afu0.0m will correspond to a
     master context and /dev/cxl/afu0.0s will correspond to a slave
@@ -362,6 +364,59 @@ read
         reserved fields:
             For future extensions and padding
 
+
+2. Card character device (powerVM guest only)
+
+    In a powerVM guest, an extra character device is created for the
+    card. The device is only used to write (flash) a new image on the
+    FPGA accelerator. Once the image is written and verified, the
+    device tree is updated and the card is reset to reload the updated
+    image.
+
+open
+----
+
+    Opens the device and allocates a file descriptor to be used with
+    the rest of the API. The device can only be opened once.
+
+ioctl
+-----
+
+CXL_IOCTL_DOWNLOAD_IMAGE:
+CXL_IOCTL_VALIDATE_IMAGE:
+    Starts and controls flashing a new FPGA image. Partial
+    reconfiguration is not supported (yet), so the image must contain
+    a copy of the PSL and AFU(s). Since an image can be quite large,
+    the caller may have to iterate, splitting the image in smaller
+    chunks.
+
+    Takes a pointer to a struct cxl_adapter_image:
+        struct cxl_adapter_image {
+            __u64 flags;
+            __u64 data;
+            __u64 len_data;
+            __u64 len_image;
+            __u64 reserved1;
+            __u64 reserved2;
+            __u64 reserved3;
+            __u64 reserved4;
+        };
+
+    flags:
+        These flags indicate which optional fields are present in
+        this struct. Currently all fields are mandatory.
+
+    data:
+        Pointer to a buffer with part of the image to write to the
+        card.
+
+    len_data:
+        Size of the buffer pointed to by data.
+
+    len_image:
+        Full size of the image.
+
+
 Sysfs Class
 ===========
 

MAINTAINERS

@@ -4250,13 +4250,6 @@ M:	Maxim Levitsky <[email protected]>
 S:	Maintained
 F:	drivers/media/rc/ene_ir.*
 
-ENHANCED ERROR HANDLING (EEH)
-M:	Gavin Shan <[email protected]>
-L:	[email protected]
-S:	Supported
-F:	Documentation/powerpc/eeh-pci-error-recovery.txt
-F:	arch/powerpc/kernel/eeh*.c
-
 EPSON S1D13XXX FRAMEBUFFER DRIVER
 M:	Kristoffer Ericson <[email protected]>
 S:	Maintained
@@ -8315,6 +8308,15 @@ L:	[email protected]
 S:	Supported
 F:	Documentation/PCI/pci-error-recovery.txt
 
+PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC
+M:	Russell Currey <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	Documentation/powerpc/eeh-pci-error-recovery.txt
+F:	arch/powerpc/kernel/eeh*.c
+F:	arch/powerpc/platforms/*/eeh*.c
+F:	arch/powerpc/include/*/eeh*.h
+
 PCI SUBSYSTEM
 M:	Bjorn Helgaas <[email protected]>
 L:	[email protected]

arch/powerpc/Kconfig

@@ -94,6 +94,7 @@ config PPC
 	select OF_RESERVED_MEM
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select SYSCTL_EXCEPTION_TRACE
@@ -304,7 +305,7 @@ config ZONE_DMA32
 config PGTABLE_LEVELS
 	int
 	default 2 if !PPC64
-	default 3 if PPC_64K_PAGES
+	default 3 if PPC_64K_PAGES && !PPC_BOOK3S_64
 	default 4
 
 source "init/Kconfig"
@@ -374,6 +375,24 @@ config PPC_TRANSACTIONAL_MEM
        ---help---
          Support user-mode Transactional Memory on POWERPC.
 
+config DISABLE_MPROFILE_KERNEL
+	bool "Disable use of mprofile-kernel for kernel tracing"
+	depends on PPC64 && CPU_LITTLE_ENDIAN
+	default y
+	help
+	  Selecting this options disables use of the mprofile-kernel ABI for
+	  kernel tracing. That will cause options such as live patching
+	  (CONFIG_LIVEPATCH) which depend on CONFIG_DYNAMIC_FTRACE_WITH_REGS to
+	  be disabled also.
+
+	  If you have a toolchain which supports mprofile-kernel, then you can
+	  enable this. Otherwise leave it disabled. If you're not sure, say
+	  "N".
+
+config MPROFILE_KERNEL
+	depends on PPC64 && CPU_LITTLE_ENDIAN
+	def_bool !DISABLE_MPROFILE_KERNEL
+
 config IOMMU_HELPER
 	def_bool PPC64
 
@@ -390,7 +409,7 @@ config SWIOTLB
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
 	depends on SMP && (PPC_PSERIES || \
-	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
+	PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
 	---help---
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.