SCRIBE

SCRIBE (SeCuRity Intent-Based Extractor)

Instalation

Our solutions runs on top of FWS. Firstly, the FWS must installed and running in your machine.

Step #1: Clone FWS repository:

git clone https://github.com/ComputerNetworks-UFRGS/fws-export

Step #2: Install FWS

Follow installation instructions from the FWS repository, as described in the following link https://github.com/rafaelhribeiro/fws-export#installation

Step #3: Clone this repo

After FWS is running, clone our repository inside FWS solution:

cd fws
git clone https://github.com/ComputerNetworks-UFRGS/SCRIBE

Step #4: Install Pipenv

Follow installation instructions from the Pipenv official repository in the following link https://github.com/pypa/pipenv#installation

After, run the following command

pipenv install

Configuration

SCRIBE expects a JSON file indicating the CSV for filtering and NAT, an alias file for interfaces (optional) and the network prefixes. A configuration example is listed below:

{
    "alias_file":"interface_aliases",
    "filtering":[
        "FILTER.csv"
    ],
    "network_prefixes":[
        "172.16.1.0/24"
    ]
}