v20200821

Documentation/ABI/testing/sysfs-bus-iio

@@ -1569,7 +1569,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
 KernelVersion:	4.3
 Contact:	[email protected]
 Description:
-		Raw (unscaled no offset etc.) percentage reading of a substance.
+		Raw (unscaled no offset etc.) reading of a substance. Units
+		after application of scale and offset are percents.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw

Documentation/core-api/cpu_hotplug.rst

@@ -50,13 +50,6 @@ Command Line Switches
 
   This option is limited to the X86 and S390 architecture.
 
-``cede_offline={"off","on"}``
-  Use this option to disable/enable putting offlined processors to an extended
-  ``H_CEDE`` state on supported pseries platforms. If nothing is specified,
-  ``cede_offline`` is set to "on".
-
-  This option is limited to the PowerPC architecture.
-
 ``cpu0_hotplug``
   Allow to shutdown CPU0.
 

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 7
-SUBLEVEL = 14
+SUBLEVEL = 16
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 

arch/arm/boot/dts/exynos5422-odroid-core.dtsi

@@ -411,12 +411,6 @@
 	status = "okay";
 };
 
-&bus_fsys {
-	operating-points-v2 = <&bus_fsys2_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
 &bus_fsys2 {
 	operating-points-v2 = <&bus_fsys2_opp_table>;
 	devfreq = <&bus_wcore>;

arch/arm/boot/dts/exynos5800.dtsi

@@ -23,17 +23,17 @@
 &cluster_a15_opp_table {
 	opp-2000000000 {
 		opp-hz = /bits/ 64 <2000000000>;
-		opp-microvolt = <1312500>;
+		opp-microvolt = <1312500 1312500 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-1900000000 {
 		opp-hz = /bits/ 64 <1900000000>;
-		opp-microvolt = <1262500>;
+		opp-microvolt = <1262500 1262500 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-1800000000 {
 		opp-hz = /bits/ 64 <1800000000>;
-		opp-microvolt = <1237500>;
+		opp-microvolt = <1237500 1237500 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-1700000000 {

arch/arm/boot/dts/r8a7793-gose.dts

@@ -336,7 +336,7 @@
 			reg = <0x20>;
 			remote = <&vin1>;
 
-			port {
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -394,7 +394,7 @@
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			default-input = <0>;
 
-			port {
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 

arch/arm/boot/dts/rk3288.dtsi

@@ -7,7 +7,6 @@
 #include <dt-bindings/clock/rk3288-cru.h>
 #include <dt-bindings/power/rk3288-power.h>
 #include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/power/rk3288-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
 
 / {

arch/arm/boot/dts/stm32mp15-pinctrl.dtsi

@@ -1095,15 +1095,15 @@
 
 	uart7_pins_a: uart7-0 {
 		pins1 {
-			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <0>;
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
-				 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
-				 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('E', 10, AF7)>, /* UART7_CTS */
+				 <STM32_PINMUX('E', 9, AF7)>; /* UART7_RTS */
 			bias-disable;
 		};
 	};

arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi

@@ -16,15 +16,27 @@
 		regulator-type = "voltage";
 		regulator-boot-on;
 		regulator-always-on;
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1300000>;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1308475>;
 		regulator-ramp-delay = <50>; /* 4ms */
 		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
 		gpios-states = <0x1>;
-		states = <1100000 0>, <1300000 1>;
+		states = <1108475 0>, <1308475 1>;
 	};
 };
 
 &cpu0 {
 	cpu-supply = <&reg_vdd_cpux>;
 };
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};

arch/arm/kernel/stacktrace.c

@@ -22,6 +22,19 @@
  * A simple function epilogue looks like this:
  *	ldm	sp, {fp, sp, pc}
  *
+ * When compiled with clang, pc and sp are not pushed. A simple function
+ * prologue looks like this when built with clang:
+ *
+ *	stmdb	{..., fp, lr}
+ *	add	fp, sp, #x
+ *	sub	sp, sp, #y
+ *
+ * A simple function epilogue looks like this when built with clang:
+ *
+ *	sub	sp, fp, #x
+ *	ldm	{..., fp, pc}
+ *
+ *
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
@@ -34,6 +47,16 @@ int notrace unwind_frame(struct stackframe *frame)
 	low = frame->sp;
 	high = ALIGN(low, THREAD_SIZE);
 
+#ifdef CONFIG_CC_IS_CLANG
+	/* check current frame pointer is within bounds */
+	if (fp < low + 4 || fp > high - 4)
+		return -EINVAL;
+
+	frame->sp = frame->fp;
+	frame->fp = *(unsigned long *)(fp);
+	frame->pc = frame->lr;
+	frame->lr = *(unsigned long *)(fp + 4);
+#else
 	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
@@ -42,6 +65,7 @@ int notrace unwind_frame(struct stackframe *frame)
 	frame->fp = *(unsigned long *)(fp - 12);
 	frame->sp = *(unsigned long *)(fp - 8);
 	frame->pc = *(unsigned long *)(fp - 4);
+#endif
 
 	return 0;
 }

arch/arm/mach-at91/pm.c

@@ -592,26 +592,31 @@ static void __init at91_pm_sram_init(void)
 	sram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc sram!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
 	at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
 					at91_pm_suspend_in_sram_sz, false);
 	if (!at91_suspend_sram_fn) {
 		pr_warn("SRAM: Could not map\n");
-		return;
+		goto out_put_device;
 	}
 
 	/* Copy the pm suspend handler to SRAM */
 	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
+	return;
+
+out_put_device:
+	put_device(&pdev->dev);
+	return;
 }
 
 static bool __init at91_is_pm_mode_active(int pm_mode)

arch/arm/mach-exynos/exynos.c

@@ -193,7 +193,7 @@ static void __init exynos_dt_fixup(void)
 }
 
 DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)")
-	.l2c_aux_val	= 0x3c400001,
+	.l2c_aux_val	= 0x3c400000,
 	.l2c_aux_mask	= 0xc20fffff,
 	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos_init_io,

arch/arm/mach-exynos/mcpm-exynos.c

@@ -26,6 +26,7 @@
 #define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
 
 static void __iomem *ns_sram_base_addr __ro_after_init;
+static bool secure_firmware __ro_after_init;
 
 /*
  * The common v7_exit_coherency_flush API could not be used because of the
@@ -58,15 +59,16 @@ static void __iomem *ns_sram_base_addr __ro_after_init;
 static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 {
 	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+	bool state;
 
 	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
 		cluster >= EXYNOS5420_NR_CLUSTERS)
 		return -EINVAL;
 
-	if (!exynos_cpu_power_state(cpunr)) {
-		exynos_cpu_power_up(cpunr);
-
+	state = exynos_cpu_power_state(cpunr);
+	exynos_cpu_power_up(cpunr);
+	if (!state && secure_firmware) {
 		/*
 		 * This assumes the cluster number of the big cores(Cortex A15)
 		 * is 0 and the Little cores(Cortex A7) is 1.
@@ -258,6 +260,8 @@ static int __init exynos_mcpm_init(void)
 		return -ENOMEM;
 	}
 
+	secure_firmware = exynos_secure_firmware_available();
+
 	/*
 	 * To increase the stability of KFC reset we need to program
 	 * the PMU SPARE3 register

arch/arm/mach-socfpga/pm.c

@@ -49,14 +49,14 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -67,7 +67,7 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!suspend_ocram_base) {
 		pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	/* Copy the code that puts DDR in self refresh to ocram */
@@ -81,6 +81,8 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!socfpga_sdram_self_refresh_in_ocram)
 		ret = -EFAULT;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(np);
 

arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi

@@ -279,7 +279,7 @@
 
 &reg_dldo4 {
 	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <3300000>;
+	regulator-max-microvolt = <1800000>;
 	regulator-name = "vcc-wifi-io";
 };
 

arch/arm64/boot/dts/amlogic/Makefile

@@ -1,6 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max-no-cvbs.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6-no-cvbs.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max-rmii.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-gt1-mini-a.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
@@ -53,6 +51,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb