Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upst…

…ream-linus

Pull MIPS fixes from Ralf Baechle:
 "Pretty much all across the field so with this we should be in
  reasonable shape for the upcoming -rc2"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: OCTEON: make get_system_type() thread-safe
  MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores
  MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init'
  MIPS: EVA: Add new EVA header
  MIPS: scall64-o32: Fix indirect syscall detection
  MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64
  MIPS: Loongson: Fix COP2 usage for preemptible kernel
  MIPS: NL: Fix nlm_xlp_defconfig build error
  MIPS: Remove race window in page fault handling
  MIPS: Malta: Improve system memory detection for '{e, }memsize' >= 2G
  MIPS: Alchemy: Fix db1200 PSC clock enablement
  MIPS: BCM47XX: Fix reboot problem on BCM4705/BCM4785
  MIPS: Remove duplicated include from numa.c
  MIPS: Add common plat_irq_dispatch declaration
  MIPS: MSP71xx: remove unused plat_irq_dispatch() argument
  MIPS: GIC: Remove useless parens from GICBIS().
  MIPS: perf: Mark pmu interupt IRQF_NO_THREAD

arch/mips/alchemy/devboards/db1200.c

@@ -847,6 +847,7 @@ int __init db1200_dev_setup(void)
 			pr_warn("DB1200: cant get I2C close to 50MHz\n");
 		else
 			clk_set_rate(c, pfc);
+		clk_prepare_enable(c);
 		clk_put(c);
 	}
 
@@ -922,11 +923,6 @@ int __init db1200_dev_setup(void)
 	}
 
 	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
-	c = clk_get(NULL, "psc1_intclk");
-	if (!IS_ERR(c)) {
-		clk_prepare_enable(c);
-		clk_put(c);
-	}
 	__raw_writel(PSC_SEL_CLK_SERCLK,
 	    (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 	wmb();

arch/mips/bcm47xx/setup.c

@@ -59,12 +59,21 @@ static void bcm47xx_machine_restart(char *command)
 	switch (bcm47xx_bus_type) {
 #ifdef CONFIG_BCM47XX_SSB
 	case BCM47XX_BUS_TYPE_SSB:
-		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 3);
+		if (bcm47xx_bus.ssb.chip_id == 0x4785)
+			write_c0_diag4(1 << 22);
+		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+		if (bcm47xx_bus.ssb.chip_id == 0x4785) {
+			__asm__ __volatile__(
+				".set\tmips3\n\t"
+				"sync\n\t"
+				"wait\n\t"
+				".set\tmips0");
+		}
 		break;
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
 	case BCM47XX_BUS_TYPE_BCMA:
-		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 3);
+		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
 		break;
 #endif
 	}

arch/mips/cavium-octeon/setup.c

@@ -263,7 +263,6 @@ static uint64_t crashk_size, crashk_base;
 static int octeon_uart;
 
 extern asmlinkage void handle_int(void);
-extern asmlinkage void plat_irq_dispatch(void);
 
 /**
  * Return non zero if we are currently running in the Octeon simulator
@@ -458,18 +457,26 @@ static void octeon_halt(void)
 	octeon_kill_core(NULL);
 }
 
+static char __read_mostly octeon_system_type[80];
+
+static int __init init_octeon_system_type(void)
+{
+	snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)",
+		cvmx_board_type_to_string(octeon_bootinfo->board_type),
+		octeon_model_get_string(read_c0_prid()));
+
+	return 0;
+}
+early_initcall(init_octeon_system_type);
+
 /**
  * Return a string representing the system type
  *
  * Returns
  */
 const char *octeon_board_type_string(void)
 {
-	static char name[80];
-	sprintf(name, "%s (%s)",
-		cvmx_board_type_to_string(octeon_bootinfo->board_type),
-		octeon_model_get_string(read_c0_prid()));
-	return name;
+	return octeon_system_type;
 }
 
 const char *get_system_type(void)

arch/mips/include/asm/eva.h

@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014, Imagination Technologies Ltd.
+ *
+ * EVA functions for generic code
+ */
+
+#ifndef _ASM_EVA_H
+#define _ASM_EVA_H
+
+#include <kernel-entry-init.h>
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_EVA
+
+/*
+ * EVA early init code
+ *
+ * Platforms must define their own 'platform_eva_init' macro in
+ * their kernel-entry-init.h header. This macro usually does the
+ * platform specific configuration of the segmentation registers,
+ * and it is normally called from assembly code.
+ *
+ */
+
+.macro eva_init
+platform_eva_init
+.endm
+
+#else
+
+.macro eva_init
+.endm
+
+#endif /* CONFIG_EVA */
+
+#endif /* __ASSEMBLY__ */
+
+#endif

arch/mips/include/asm/gic.h

@@ -49,7 +49,7 @@
 #endif
 #define GICBIS(reg, mask, bits)			\
 	do { u32 data;				\
-		GICREAD((reg), data);		\
+		GICREAD(reg, data);		\
 		data &= ~(mask);		\
 		data |= ((bits) & (mask));	\
 		GICWRITE((reg), data);		\

arch/mips/include/asm/irq.h

@@ -26,6 +26,8 @@ static inline int irq_canonicalize(int irq)
 #define irq_canonicalize(irq) (irq)	/* Sane hardware, sane code ... */
 #endif
 
+asmlinkage void plat_irq_dispatch(void);
+
 extern void do_IRQ(unsigned int irq);
 
 extern void arch_init_irq(void);

arch/mips/include/asm/mach-malta/kernel-entry-init.h

@@ -10,14 +10,15 @@
 #ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
 #define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
 
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
 	/*
 	 * Prepare segments for EVA boot:
 	 *
 	 * This is in case the processor boots in legacy configuration
 	 * (SI_EVAReset is de-asserted and CONFIG5.K == 0)
 	 *
-	 * On entry, t1 is loaded with CP0_CONFIG
-	 *
 	 * ========================= Mappings =============================
 	 * Virtual memory           Physical memory           Mapping
 	 * 0x00000000 - 0x7fffffff  0x80000000 - 0xfffffffff   MUSUK (kuseg)
@@ -30,12 +31,20 @@
 	 *
 	 *
 	 * Lowmem is expanded to 2GB
+	 *
+	 * The following code uses the t0, t1, t2 and ra registers without
+	 * previously preserving them.
+	 *
 	 */
-	.macro	eva_entry
+	.macro	platform_eva_init
+
+	.set	push
+	.set	reorder
 	/*
 	 * Get Config.K0 value and use it to program
 	 * the segmentation registers
 	 */
+	mfc0    t1, CP0_CONFIG
 	andi	t1, 0x7 /* CCA */
 	move	t2, t1
 	ins	t2, t1, 16, 3
@@ -77,6 +86,8 @@
 	mtc0    t0, $16, 5
 	sync
 	jal	mips_ihb
+
+	.set	pop
 	.endm
 
 	.macro	kernel_entry_setup
@@ -95,7 +106,7 @@
 	sll     t0, t0, 6   /* SC bit */
 	bgez    t0, 9f
 
-	eva_entry
+	platform_eva_init
 	b       0f
 9:
 	/* Assume we came from YAMON... */
@@ -127,8 +138,7 @@
 #ifdef CONFIG_EVA
 	sync
 	ehb
-	mfc0    t1, CP0_CONFIG
-	eva_entry
+	platform_eva_init
 #endif
 	.endm
 

arch/mips/include/asm/mach-netlogic/topology.h

@@ -10,13 +10,6 @@
 
 #include <asm/mach-netlogic/multi-node.h>
 
-#ifdef CONFIG_SMP
-#define topology_physical_package_id(cpu)	cpu_to_node(cpu)
-#define topology_core_id(cpu)	(cpu_logical_map(cpu) / NLM_THREADS_PER_CORE)
-#define topology_thread_cpumask(cpu)		(&cpu_sibling_map[cpu])
-#define topology_core_cpumask(cpu)	cpumask_of_node(cpu_to_node(cpu))
-#endif
-
 #include <asm-generic/topology.h>
 
 #endif /* _ASM_MACH_NETLOGIC_TOPOLOGY_H */

arch/mips/include/asm/pgtable.h

@@ -122,6 +122,9 @@ do {									\
 	}								\
 } while(0)
 
+extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+	pte_t pteval);
+
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
 
 #define pte_none(pte)		(!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
@@ -145,7 +148,6 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
 		}
 	}
 }
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
 
 static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
@@ -183,7 +185,6 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 	}
 #endif
 }
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
 
 static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
@@ -390,15 +391,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
 	pte_t pte);
-extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
-	pte_t pte);
 
 static inline void update_mmu_cache(struct vm_area_struct *vma,
 	unsigned long address, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 	__update_tlb(vma, address, pte);
-	__update_cache(vma, address, pte);
 }
 
 static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,

arch/mips/include/asm/syscall.h

@@ -131,10 +131,12 @@ static inline int syscall_get_arch(void)
 {
 	int arch = EM_MIPS;
 #ifdef CONFIG_64BIT
-	if (!test_thread_flag(TIF_32BIT_REGS))
+	if (!test_thread_flag(TIF_32BIT_REGS)) {
 		arch |= __AUDIT_ARCH_64BIT;
-	if (test_thread_flag(TIF_32BIT_ADDR))
-		arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32;
+		/* N32 sets only TIF_32BIT_ADDR */
+		if (test_thread_flag(TIF_32BIT_ADDR))
+			arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32;
+	}
 #endif
 #if defined(__LITTLE_ENDIAN)
 	arch |=  __AUDIT_ARCH_LE;

arch/mips/kernel/cps-vec.S

@@ -13,6 +13,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/asmmacro.h>
 #include <asm/cacheops.h>
+#include <asm/eva.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/pm.h>
@@ -166,6 +167,9 @@ dcache_done:
 1:	jal	mips_cps_core_init
 	 nop
 
+	/* Do any EVA initialization if necessary */
+	eva_init
+
 	/*
 	 * Boot any other VPEs within this core that should be online, and
 	 * deactivate this VPE if it should be offline.

arch/mips/kernel/perf_event_mipsxx.c

@@ -558,7 +558,7 @@ static int mipspmu_get_irq(void)
 	if (mipspmu.irq >= 0) {
 		/* Request my own irq handler. */
 		err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq,
-			IRQF_PERCPU | IRQF_NOBALANCING,
+			IRQF_PERCPU | IRQF_NOBALANCING | IRQF_NO_THREAD,
 			"mips_perf_pmu", NULL);
 		if (err) {
 			pr_warning("Unable to request IRQ%d for MIPS "

arch/mips/kernel/scall64-o32.S

@@ -113,15 +113,19 @@ trace_a_syscall:
 	move	s0, t2			# Save syscall pointer
 	move	a0, sp
 	/*
-	 * syscall number is in v0 unless we called syscall(__NR_###)
+	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
 	 * where the real syscall number is in a0
 	 * note: NR_syscall is the first O32 syscall but the macro is
 	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
 	 * therefore __NR_O32_Linux is used (4000)
 	 */
-	addiu	a1, v0,  __NR_O32_Linux
-	bnez	v0, 1f /* __NR_syscall at offset 0 */
-	lw	a1, PT_R4(sp)
+	.set	push
+	.set	reorder
+	subu	t1, v0,  __NR_O32_Linux
+	move	a1, v0
+	bnez	t1, 1f /* __NR_syscall at offset 0 */
+	lw	a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
+	.set	pop
 
 1:	jal	syscall_trace_enter
 

arch/mips/loongson/loongson-3/cop2-ex.c

@@ -22,13 +22,13 @@
 static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
 	void *data)
 {
-	int fpu_enabled;
+	int fpu_owned;
 	int fr = !test_thread_flag(TIF_32BIT_FPREGS);
 
 	switch (action) {
 	case CU2_EXCEPTION:
 		preempt_disable();
-		fpu_enabled = read_c0_status() & ST0_CU1;
+		fpu_owned = __is_fpu_owner();
 		if (!fr)
 			set_c0_status(ST0_CU1 | ST0_CU2);
 		else
@@ -39,8 +39,8 @@ static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
 			KSTK_STATUS(current) |= ST0_FR;
 		else
 			KSTK_STATUS(current) &= ~ST0_FR;
-		/* If FPU is enabled, we needn't init or restore fp */
-		if(!fpu_enabled) {
+		/* If FPU is owned, we needn't init or restore fp */
+		if (!fpu_owned) {
 			set_thread_flag(TIF_USEDFPU);
 			if (!used_math()) {
 				_init_fpu();

arch/mips/loongson/loongson-3/numa.c

@@ -24,8 +24,6 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/sections.h>
-#include <linux/bootmem.h>
-#include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/bootinfo.h>
 #include <asm/mc146818-time.h>