X-ends update

Endstop key added and slightly expanded bearing and nuts holes
ImHumble · May 28, 2016 · d43e41e · d43e41e
1 parent cc7204d
commit d43e41e
Show file tree

Hide file tree

Showing 4 changed files with 4,622 additions and 4,454 deletions.
diff --git a/Printed-Parts/scad/x-end-motor.scad b/Printed-Parts/scad/x-end-motor.scad
@@ -91,7 +91,7 @@ module x_end_motor(){
   x_end_motor_holes();
   x_end_motor_endstop_holes();    
 
-
+      translate([-12,-42,65]) rotate([-35,0,0])  rotate([0,0,45]) cube(10,10,10);
       translate([-15,8.5,6]) rotate([90,0,0]) cylinder(h=5, r=5, $fn=30);   
       translate([-15,8.5,51]) rotate([90,0,0]) cylinder(h=5, r=5, $fn=30);   
       translate([-15,3.5,6]) rotate([90,0,0]) cylinder(h=3, r1=5, r2=4, $fn=30);   

diff --git a/Printed-Parts/scad/x-end.scad b/Printed-Parts/scad/x-end.scad
@@ -1,87 +1,87 @@
-// PRUSA iteration3
-// X end prototype
-// GNU GPL v3
-// Josef Průša <[email protected]> and contributors
-// http://www.reprap.org/wiki/Prusa_Mendel
-// http://prusamendel.org
-
-use <bearing.scad>
-use <polyholes.scad>
-rod_distance = 45;
-
-module x_end_base(){
-// Main block
-height = 58;
-translate(v=[-15,-9,height/2]) cube(size = [17,39,height], center = true);
-// Bearing holder
- vertical_bearing_base();	
-//Nut trap
- // Cylinder
-   translate(v=[0,-17,0]) poly_cylinder(h = 8, r=12.5, $fn=25);
- // Hexagon
- //translate(v=[0,-17,0]) rotate([0,0,30]) cylinder(h = 8, r=8, $fn = 6);
-translate(v=[-6,-10.6,10]) rotate([0,0,48.2]) cube(size = [10,5,1], center = true);
-}
-
-module x_end_holes(){
- vertical_bearing_holes();
-// Belt hole
-translate(v=[-1,0,0]){
-// Stress relief
-translate(v=[-5.5-10+1.5,-10-1,30]) cube(size = [18,1,28], center = true);
-difference(){
-	translate(v=[-5.5-10+1.5,-10,30]) cube(size = [10,46,28], center = true);
-
-
-
-	// Nice edges
-	translate(v=[-5.5-10+1.5-5,-10,30+23]) rotate([0,20,0]) cube(size = [10,46,28], center = true);
-	translate(v=[-5.5-10+1.5+5,-10,30+23]) rotate([0,-20,0]) cube(size = [10,46,28], center = true);
-	translate(v=[-5.5-10+1.5,-10,30-23]) rotate([0,45,0]) cube(size = [10,46,28], center = true);
-	translate(v=[-5.5-10+1.5,-10,30-23]) rotate([0,-45,0]) cube(size = [10,46,28], center = true);
-
-}
-}
-
-// Bottom pushfit rod
-translate(v=[-15,-41.5,6]) rotate(a=[-90,0,0]) pushfit_rod(7.8,50);
-// Top pushfit rod
-translate(v=[-15,-41.5,rod_distance+6]) rotate(a=[-90,0,0]) pushfit_rod(7.8,50);
-
-// TR Nut trap
-   // Hole for the nut
-    translate(v=[0,-17, -1]) poly_cylinder(h = 9.01, r = 6.55, $fn = 25);
-
-// Screw holes for TR nut
-    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, 9.5, -1]) cylinder(h = 10, r = 1.55, $fn=25);
-    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, -9.5, -1]) cylinder(h = 10, r = 1.55, $fn=25);
-
-// Nut traps for TR nut screws
-    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, 9.5, 6]) rotate([0, 0, 0])cylinder(h = 3, r = 3.2, $fn=6);
-
-    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, -9.5, 6]) rotate([0, 0, 30])cylinder(h = 3, r = 3.2, $fn=6);
-    translate([-5.5,-17.2,6]) rotate([0,0,30]) cube([5,5,3]);
-    translate([-0,-17.2,6]) rotate([0,0,60]) cube([5,10,3]);
-}
-
-
-// Final prototype
-module x_end_plain(){
- difference(){
-  x_end_base();
-  x_end_holes();
- }
-}
-
-x_end_plain();
-
-
-module pushfit_rod(diameter,length){
- poly_cylinder(h = length, r=diameter/2);
- difference(){
- 	translate(v=[0,-diameter/2.85,length/2]) rotate([0,0,45]) cube(size = [diameter/2,diameter/2,length], center = true);
- 	translate(v=[0,-diameter/4-diameter/2-0.4,length/2]) rotate([0,0,0]) cube(size = [diameter,diameter/2,length], center = true);
- }
- //translate(v=[0,-diameter/2-2,length/2]) cube(size = [diameter,1,length], center = true);
-}
-
+// PRUSA iteration3
+// X end prototype
+// GNU GPL v3
+// Josef Průša <[email protected]> and contributors
+// http://www.reprap.org/wiki/Prusa_Mendel
+// http://prusamendel.org
+
+use <bearing.scad>
+use <polyholes.scad>
+rod_distance = 45;
+
+module x_end_base(){
+// Main block
+height = 58;
+translate(v=[-15,-9,height/2]) cube(size = [17,39,height], center = true);
+// Bearing holder
+ vertical_bearing_base();	
+//Nut trap
+ // Cylinder
+   translate(v=[0,-17,0]) poly_cylinder(h = 8, r=12.5, $fn=25);
+ // Hexagon
+ //translate(v=[0,-17,0]) rotate([0,0,30]) cylinder(h = 8, r=8, $fn = 6);
+translate(v=[-6,-10.6,10]) rotate([0,0,48.2]) cube(size = [10,5,1], center = true);
+}
+
+module x_end_holes(){
+ vertical_bearing_holes();
+// Belt hole
+translate(v=[-1,0,0]){
+// Stress relief
+translate(v=[-5.5-10+1.5,-10-1,30]) cube(size = [18,1,28], center = true);
+difference(){
+	translate(v=[-5.5-10+1.5,-10,30]) cube(size = [10,46,28], center = true);
+
+
+
+	// Nice edges
+	translate(v=[-5.5-10+1.5-5,-10,30+23]) rotate([0,20,0]) cube(size = [10,46,28], center = true);
+	translate(v=[-5.5-10+1.5+5,-10,30+23]) rotate([0,-20,0]) cube(size = [10,46,28], center = true);
+	translate(v=[-5.5-10+1.5,-10,30-23]) rotate([0,45,0]) cube(size = [10,46,28], center = true);
+	translate(v=[-5.5-10+1.5,-10,30-23]) rotate([0,-45,0]) cube(size = [10,46,28], center = true);
+
+}
+}
+
+// Bottom pushfit rod
+translate(v=[-15,-41.5,6]) rotate(a=[-90,0,0]) pushfit_rod(7.8,50);
+// Top pushfit rod
+translate(v=[-15,-41.5,rod_distance+6]) rotate(a=[-90,0,0]) pushfit_rod(7.8,50);
+
+// TR Nut trap
+   // Hole for the nut
+    translate(v=[0,-17, -1]) poly_cylinder(h = 9.01, r = 6.6, $fn = 25);
+
+// Screw holes for TR nut
+    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, 9.5, -1]) cylinder(h = 10, r = 1.55, $fn=25);
+    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, -9.5, -1]) cylinder(h = 10, r = 1.55, $fn=25);
+
+// Nut traps for TR nut screws
+    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, 9.5, 6]) rotate([0, 0, 0])cylinder(h = 3, r = 3.3, $fn=6);
+
+    translate(v=[0,-17, 0]) rotate([0, 0, -135]) translate([0, -9.5, 6]) rotate([0, 0, 30])cylinder(h = 3, r = 3.2, $fn=6);
+    translate([-5.5,-17.2,6]) rotate([0,0,30]) cube([5,5,3]);
+    translate([-0,-17.2,6]) rotate([0,0,60]) cube([5,10,3]);
+}
+
+
+// Final prototype
+module x_end_plain(){
+ difference(){
+  x_end_base();
+  x_end_holes();
+ }
+}
+
+x_end_plain();
+
+
+module pushfit_rod(diameter,length){
+ poly_cylinder(h = length, r=diameter/2);
+ difference(){
+ 	translate(v=[0,-diameter/2.85,length/2]) rotate([0,0,45]) cube(size = [diameter/2,diameter/2,length], center = true);
+ 	translate(v=[0,-diameter/4-diameter/2-0.4,length/2]) rotate([0,0,0]) cube(size = [diameter,diameter/2,length], center = true);
+ }
+ //translate(v=[0,-diameter/2-2,length/2]) cube(size = [diameter,1,length], center = true);
+}
+