Skip to content

JorenSix/arduino-esp32

 
 

Repository files navigation

Arduino core for ESP32 WiFi chip

Need help or have a question? Join the chat at https://gitter.im/espressif/arduino-esp32

Development Status

Most of the framework is implemented. Most noticable is the missing analogWrite. While analogWrite is on it's way, there are a few other options that you can use:

  • 16 channels LEDC which is PWM
  • 8 channels SigmaDelta which uses SigmaDelta modulation
  • 2 channels DAC which gives real analog output

Using Arduino IDE

###Instructions for Windows

Instructions for Mac

  • Install latest Arduino IDE from arduino.cc

  • Open Terminal and execute the following command (copy->paste and hit enter):

    curl -o get-pip.py https://bootstrap.pypa.io/get-pip.py && \
    sudo python get-pip.py && \
    sudo pip install pyserial && \
    mkdir -p ~/Documents/Arduino/hardware/espressif && \
    cd ~/Documents/Arduino/hardware/espressif && \
    git clone https://github.com/espressif/arduino-esp32.git esp32 && \
    cd esp32/tools/ && \
    python get.py
  • Restart Arduino IDE

Instructions for Debian/Ubuntu Linux

  • Install latest Arduino IDE from arduino.cc

  • Open Terminal and execute the following command (copy->paste and hit enter):

    sudo usermod -a -G dialout $USER && \
    sudo apt-get install git && \
    wget https://bootstrap.pypa.io/get-pip.py && \
    sudo python get-pip.py && \
    sudo pip install pyserial && \
    mkdir -p ~/Arduino/hardware/espressif && \
    cd ~/Arduino/hardware/espressif && \
    git clone https://github.com/espressif/arduino-esp32.git esp32 && \
    cd esp32/tools/ && \
    python get.py
  • Restart Arduino IDE

Using PlatformIO

PlatformIO is an open source ecosystem for IoT development with cross platform build system, library manager and full support for Espressif ESP32 development. It works on the popular host OS: Mac OS X, Windows, Linux 32/64, Linux ARM (like Raspberry Pi, BeagleBone, CubieBoard).

Using as ESP-IDF component

  • Download and install esp-idf

  • Create blank idf project (from one of the examples)

  • in the project folder, create a folder called components and clone this repository inside

    mkdir -p components && \
    cd components && \
    git clone https://github.com/espressif/arduino-esp32.git arduino && \
    cd .. && \
    make menuconfig
  • make menuconfig has some Arduino options

    • "Autostart Arduino setup and loop on boot"
      • If you enable this options, your main.cpp should be formated like any other sketch

        //file: main.cpp
        #include "Arduino.h"
        
        void setup(){
          Serial.begin(115200);
        }
        
        void loop(){
          Serial.println("loop");
          delay(1000);
        }
        
      • Else you need to implement app_main() and call initArduino(); in it.

        Keep in mind that setup() and loop() will not be called in this case

        //file: main.cpp
        #include "Arduino.h"
        
        extern "C" void app_main()
        {
            initArduino();
            pinMode(4, OUTPUT);
            digitalWrite(4, HIGH);
            //do your own thing
        }
        
    • "Disable mutex locks for HAL"
      • If enabled, there will be no protection on the drivers from concurently accessing them from another thread/interrupt/core
    • "Autoconnect WiFi on boot"
      • If enabled, WiFi will start with the last known configuration
      • Else it will wait for WiFi.begin
  • make flash monitor will build, upload and open serial monitor to your board

ESP32Dev Board PINMAP

Pin Functions

About

Arduino core for the ESP32

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 52.8%
  • C 44.6%
  • Other 2.2%
  • Other 0.4%