mpc512x: add ifm ac14xx board

Add new mpc5121e based ac14xx board and a new pinmux config function for setting individual pinmux bit groups. This function is used in ac14xx board code. Signed-off-by: Anatolij Gustschin <[email protected]>
Keerthyj · Mar 9, 2013 · fcc7fe4 · fcc7fe4
1 parent 5643709
commit fcc7fe4
Show file tree

Hide file tree

Showing 7 changed files with 1,311 additions and 0 deletions.
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -234,6 +234,7 @@ Wolfgang Grandegger <[email protected]>
 
 Anatolij Gustschin <[email protected]>
 
+	ac14xx		MPC5121e
 	O2D		MPC5200
 	O2D300		MPC5200
 	O2DNT2		MPC5200

diff --git a/arch/powerpc/cpu/mpc512x/iopin.c b/arch/powerpc/cpu/mpc512x/iopin.c
@@ -47,3 +47,57 @@ void iopin_initialize(iopin_t *ioregs_init, int len)
 	}
 	return;
 }
+
+void iopin_initialize_bits(iopin_t *ioregs_init, int len)
+{
+	short i, j, p;
+	u32 *reg, mask;
+	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+	reg = (u32 *)&(im->io_ctrl);
+
+	/* iterate over table entries */
+	for (i = 0; i < len; i++) {
+		/* iterate over pins within a table entry */
+		for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
+			p < ioregs_init[i].nr_pins; p++, j++) {
+			if (ioregs_init[i].bit_or & IO_PIN_OVER_EACH) {
+				/* replace all settings at once */
+				out_be32(reg + j, ioregs_init[i].val);
+			} else {
+				/*
+				 * only replace individual parts, but
+				 * REPLACE them instead of just ORing
+				 * them in and "inheriting" previously
+				 * set bits which we don't want
+				 */
+				mask = 0;
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_FMUX)
+					mask |= IO_PIN_FMUX(3);
+
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_HOLD)
+					mask |= IO_PIN_HOLD(3);
+
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_PULL)
+					mask |= IO_PIN_PUD(1) | IO_PIN_PUE(1);
+
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_STRIG)
+					mask |= IO_PIN_ST(1);
+
+				if (ioregs_init[i].bit_or & IO_PIN_OVER_DRVSTR)
+					mask |= IO_PIN_DS(3);
+				/*
+				 * DON'T do the "mask, then insert"
+				 * in place on the register, it may
+				 * break access to external hardware
+				 * (like boot ROMs) when configuring
+				 * LPB related pins, while the code to
+				 * configure the pin is read from this
+				 * very address region
+				 */
+				clrsetbits_be32(reg + j, mask,
+						ioregs_init[i].val & mask);
+			}
+		}
+	}
+}
diff --git a/arch/powerpc/include/asm/immap_512x.h b/arch/powerpc/include/asm/immap_512x.h
@@ -878,6 +878,19 @@ typedef struct iopin_t {
 
 void iopin_initialize(iopin_t *,int);
 
+/*
+ * support to adjust individual parts of the IO pin setup
+ */
+
+#define IO_PIN_OVER_EACH	(1 << 0) /* for compatibility */
+#define IO_PIN_OVER_FMUX	(1 << 1)
+#define IO_PIN_OVER_HOLD	(1 << 2)
+#define IO_PIN_OVER_PULL	(1 << 3)
+#define IO_PIN_OVER_STRIG	(1 << 4)
+#define IO_PIN_OVER_DRVSTR	(1 << 5)
+
+void iopin_initialize_bits(iopin_t *, int);
+
 /*
  * IIM
  */

diff --git a/board/ifm/ac14xx/Makefile b/board/ifm/ac14xx/Makefile
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2009 Wolfgang Denk <[email protected]>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= $(BOARD).o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################