Skip to content

Commit

Permalink
X-ends modified
Browse files Browse the repository at this point in the history 
Modified waste pocket for easier assembly
  • Loading branch information
michalprusa committed May 12, 2016
1 parent 9c9f244 commit 6cc251a
Show file tree
Hide file tree
Showing 4 changed files with 5,979 additions and 2,923 deletions.
6 changes: 4 additions & 2 deletions Printed-Parts/scad/x-end-idler.scad
View file
Original file line number Diff line number Diff line change
Expand Up @@ -22,8 +22,10 @@ module x_end_idler_holes(){

module waste_pocket(){
// waste pocket
translate([-15,-1,6]) rotate([90,0,0]) cylinder( h=5, r=5, $fn=30);
translate([-15,-1,51]) rotate([90,0,0]) cylinder( h=5, r=5, $fn=30);
translate([-15,-1,6]) rotate([90,0,0]) cylinder( h=5, r=5.5, $fn=30);
translate([-15,-1,51]) rotate([90,0,0]) cylinder( h=5, r=5.5, $fn=30);
translate([-15,-5.9,6]) rotate([90,0,0]) cylinder( h=3, r1=5.5, r2=4.3, $fn=30);
translate([-15,-5.9,51]) rotate([90,0,0]) cylinder( h=3, r=5.5, r2=4.3, $fn=30);


//M3 thread
Expand Down
204 changes: 103 additions & 101 deletions Printed-Parts/scad/x-end-motor.scad
View file
Original file line number Diff line number Diff line change
@@ -1,102 +1,104 @@
// PRUSA iteration3
// X end motor
// GNU GPL v3
// Josef Průša <[email protected]> and contributors
// http://www.reprap.org/wiki/Prusa_Mendel
// http://prusamendel.org

use <x-end.scad>

module x_end_motor_base(){
x_end_base();
translate(v=[-15,31,26.5]) cube(size = [17,44,53], center = true);
}

module x_end_motor_endstop_base(){
translate([-23.5,-28.5,58]){
difference(){
// Base block
cube([17,18.2,4]);
// Nice edge
translate([-1,10,10])rotate([-45,0,0])cube(20,20,20);
}
}
}

module x_end_motor_endstop_holes(){
translate([-23.5,-28.5,58]){
translate([17/2,7.5,-3]){
// Back screw hole for endstop
translate([-4.75,0,0])cylinder(r=1,h=19,$fn=20);
// Front screw hole for endstop
translate([4.75,0,0])cylinder(r=1,h=19,$fn=20);
}
}
}

module x_end_motor_holes(){
x_end_holes();
// Position to place
translate(v=[-1,32,30.25]){
// Belt hole
translate(v=[-14,1,0]) cube(size = [10,46,22], center = true);
// Motor mounting holes
translate(v=[20,-15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=1.8, $fn=30);
translate(v=[1,-15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 10, r=3.1, $fn=30);
translate(v=[20,-15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=1.8, $fn=30);
translate(v=[1,-15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 10, r=3.1, $fn=30);
translate(v=[20,15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=1.8, $fn=30);
translate(v=[1,15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 10, r=3.1, $fn=30);
translate(v=[20,15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=1.8, $fn=30);
translate(v=[1,15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 10, r=3.1, $fn=30);

// Material saving cutout
translate(v=[-10,12,10]) cube(size = [60,42,42], center = true);

// Material saving cutout
translate(v=[-10,40,-30]) rotate(a=[45,0,0]) cube(size = [60,42,42], center = true);
// Motor shaft cutout
//#translate(v=[0,0,0]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=17, $fn=6);
}
}

// Motor shaft cutout
module x_end_motor_shaft_cutout(){
union(){
difference(){
translate(v=[0,32,30]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=17, $fn=6);

translate(v=[-10,-17+32,30]) cube(size = [60,2,10], center = true);
translate(v=[-10,-8+32,-15.5+30]) rotate(a=[60,0,0]) cube(size = [60,2,10], center = true); ///
translate(v=[-10,8+32,-15.5+30]) rotate(a=[-60,0,0]) cube(size = [60,2,10], center = true);


}
translate(v=[-30,25.2,-11.8 +30]) rotate(a=[0,90,0]) cylinder(h = 30, r=3, $fn=30);
translate(v=[-30,19.05,30]) rotate(a=[0,90,0]) cylinder(h = 30, r=3.5, $fn=100);
}
}




// Final part
module x_end_motor(){
difference(){
union(){
x_end_motor_base();
x_end_motor_endstop_base();
}
x_end_motor_shaft_cutout();
x_end_motor_holes();
x_end_motor_endstop_holes();


translate([-15,8.5,6]) rotate([90,0,0]) cylinder(h=5, r=5, $fn=30);
translate([-15,8.5,51]) rotate([90,0,0]) cylinder(h=5, r=5, $fn=30);
//#translate([-16,-40,0])cube([50,100,100]);
}

}

// PRUSA iteration3
// X end motor
// GNU GPL v3
// Josef Průša <[email protected]> and contributors
// http://www.reprap.org/wiki/Prusa_Mendel
// http://prusamendel.org

use <x-end.scad>

module x_end_motor_base(){
x_end_base();
translate(v=[-15,31,26.5]) cube(size = [17,44,53], center = true);
}

module x_end_motor_endstop_base(){
translate([-23.5,-28.5,58]){
difference(){
// Base block
cube([17,18.2,4]);
// Nice edge
translate([-1,10,10])rotate([-45,0,0])cube(20,20,20);
}
}
}

module x_end_motor_endstop_holes(){
translate([-23.5,-28.5,58]){
translate([17/2,7.5,-3]){
// Back screw hole for endstop
translate([-4.75,0,0])cylinder(r=1,h=19,$fn=20);
// Front screw hole for endstop
translate([4.75,0,0])cylinder(r=1,h=19,$fn=20);
}
}
}

module x_end_motor_holes(){
x_end_holes();
// Position to place
translate(v=[-1,32,30.25]){
// Belt hole
translate(v=[-14,1,0]) cube(size = [10,46,22], center = true);
// Motor mounting holes
translate(v=[20,-15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=1.8, $fn=30);
translate(v=[1,-15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 10, r=3.1, $fn=30);
translate(v=[20,-15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=1.8, $fn=30);
translate(v=[1,-15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 10, r=3.1, $fn=30);
translate(v=[20,15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=1.8, $fn=30);
translate(v=[1,15.5,-15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 10, r=3.1, $fn=30);
translate(v=[20,15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=1.8, $fn=30);
translate(v=[1,15.5,15.5]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 10, r=3.1, $fn=30);

// Material saving cutout
translate(v=[-10,12,10]) cube(size = [60,42,42], center = true);

// Material saving cutout
translate(v=[-10,40,-30]) rotate(a=[45,0,0]) cube(size = [60,42,42], center = true);
// Motor shaft cutout
//#translate(v=[0,0,0]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=17, $fn=6);
}
}

// Motor shaft cutout
module x_end_motor_shaft_cutout(){
union(){
difference(){
translate(v=[0,32,30]) rotate(a=[0,-90,0]) rotate(a=[0,0,90]) cylinder(h = 70, r=17, $fn=6);

translate(v=[-10,-17+32,30]) cube(size = [60,2,10], center = true);
translate(v=[-10,-8+32,-15.5+30]) rotate(a=[60,0,0]) cube(size = [60,2,10], center = true); ///
translate(v=[-10,8+32,-15.5+30]) rotate(a=[-60,0,0]) cube(size = [60,2,10], center = true);


}
translate(v=[-30,25.2,-11.8 +30]) rotate(a=[0,90,0]) cylinder(h = 30, r=3, $fn=30);
translate(v=[-30,19.05,30]) rotate(a=[0,90,0]) cylinder(h = 30, r=3.5, $fn=100);
}
}




// Final part
module x_end_motor(){
difference(){
union(){
x_end_motor_base();
x_end_motor_endstop_base();
}
x_end_motor_shaft_cutout();
x_end_motor_holes();
x_end_motor_endstop_holes();


translate([-15,8.5,6]) rotate([90,0,0]) cylinder(h=5, r=5, $fn=30);
translate([-15,8.5,51]) rotate([90,0,0]) cylinder(h=5, r=5, $fn=30);
translate([-15,3.5,6]) rotate([90,0,0]) cylinder(h=3, r1=5, r2=4, $fn=30);
translate([-15,3.5,51]) rotate([90,0,0]) cylinder(h=3, r1=5, r2=4, $fn=30);
//#translate([-16,-40,0])cube([50,100,100]);
}

}

x_end_motor();
Loading

0 comments on commit 6cc251a

Please sign in to comment.