board/T1040rdb: Add VSC9953 support for T1040rdb board

This patch configures and initializes the L2 switch on T1040rdb board. The external L2 switch ports may be connected to PHYs only over QSGMII, for T1040rdb. Signed-off-by: Codrin Ciubotariu <[email protected]>
MrVan · Jan 21, 2015 · db4a176 · db4a176
1 parent a83fccc
commit db4a176
Show file tree

Hide file tree

Showing 2 changed files with 58 additions and 0 deletions.
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
@@ -6,11 +6,13 @@
 
 #include <common.h>
 #include <netdev.h>
+#include <asm/fsl_serdes.h>
 #include <asm/immap_85xx.h>
 #include <fm_eth.h>
 #include <fsl_mdio.h>
 #include <malloc.h>
 #include <asm/fsl_dtsec.h>
+#include <vsc9953.h>
 
 #include "../common/fman.h"
 
@@ -20,6 +22,11 @@ int board_eth_init(bd_t *bis)
 	struct memac_mdio_info memac_mdio_info;
 	unsigned int i;
 	int phy_addr = 0;
+#ifdef CONFIG_VSC9953
+	phy_interface_t phy_int;
+	struct mii_dev *bus;
+#endif
+
 	printf("Initializing Fman\n");
 
 	memac_mdio_info.regs =
@@ -81,6 +88,49 @@ int board_eth_init(bd_t *bis)
 							DEFAULT_FM_MDIO_NAME));
 	}
 
+#ifdef CONFIG_VSC9953
+	/* SerDes configured for QSGMII */
+	if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) {
+		for (i = 0; i < 4; i++) {
+			bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+			phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + i;
+			phy_int = PHY_INTERFACE_MODE_QSGMII;
+
+			vsc9953_port_info_set_mdio(i, bus);
+			vsc9953_port_info_set_phy_address(i, phy_addr);
+			vsc9953_port_info_set_phy_int(i, phy_int);
+			vsc9953_port_enable(i);
+		}
+	}
+	if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) {
+		for (i = 4; i < 8; i++) {
+			bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+			phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4;
+			phy_int = PHY_INTERFACE_MODE_QSGMII;
+
+			vsc9953_port_info_set_mdio(i, bus);
+			vsc9953_port_info_set_phy_address(i, phy_addr);
+			vsc9953_port_info_set_phy_int(i, phy_int);
+			vsc9953_port_enable(i);
+		}
+	}
+
+	/* Connect DTSEC1 to L2 switch if it doesn't have a PHY */
+	if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0)
+		vsc9953_port_enable(8);
+
+	/* Connect DTSEC2 to L2 switch if it doesn't have a PHY */
+	if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) {
+		/* Enable L2 On MAC2 using SCFG */
+		struct ccsr_scfg *scfg = (struct ccsr_scfg *)
+				CONFIG_SYS_MPC85xx_SCFG;
+
+		out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) |
+			 (0x80000000));
+		vsc9953_port_enable(9);
+	}
+#endif
+
 	cpu_eth_init(bis);
 #endif
 

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
@@ -726,6 +726,14 @@
 #define CONFIG_SYS_RGMII1_PHY_ADDR		0x01
 #define CONFIG_SYS_RGMII2_PHY_ADDR		0x02
 
+/* Enable VSC9953 L2 Switch driver on T1040 SoC */
+#ifdef CONFIG_T1040RDB
+#define CONFIG_VSC9953
+#define CONFIG_VSC9953_CMD
+#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x04
+#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x08
+#endif
+
 #define CONFIG_MII		/* MII PHY management */
 #define CONFIG_ETHPRIME		"FM1@DTSEC4"
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */