Handover-Sim2Real

Handover-Sim2Real is the official code for the following CVPR 2023 paper:

Learning Human-to-Robot Handovers from Point Clouds
Sammy Christen, Wei Yang, Claudia Pérez-D'Arpino, Otmar Hilliges, Dieter Fox, Yu-Wei Chao
IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR), 2023
[ arXiv ] [ video ] [ project site ]

Citing Handover-Sim2Real

@INPROCEEDINGS{christen:cvpr2023,
  author    = {Sammy Christen and Wei Yang and Claudia P\'{e}rez-D'Arpino and Otmar Hilliges and Dieter Fox and Yu-Wei Chao},
  booktitle = {IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR)},
  title     = {Learning Human-to-Robot Handovers from Point Clouds},
  year      = {2023},
}

License

Handover-Sim2Real is released under the NVIDIA License.

The pre-trained models are licensed under CC BY-NC-SA 4.0.

Acknowledgements

This repo is based on a Python project template created by Rowland O'Flaherty.

Prerequisites

This code is tested with Python 3.8 on Ubuntu 20.04.

Installation

For good practice for Python package management, it is recommended to install the package into a virtual environment (e.g., virtualenv or conda).

First, clone the repo with --recursive and cd into it:

git clone --recursive https://github.com/NVlabs/handover-sim2real.git
cd handover-sim2real

Installation consists of four modules:

handover-sim2real (main repo)
handover-sim (submodule)
GA-DDPG (submodule)
OMG-Planner (submodule): Can be skipped if you are not running Training.

Below are the step-by-step installation commands:

handover-sim2real (main repo)

# Install handover-sim2real as Python pacakge.
pip install -e .

handover-sim (submodule)

Before running the commands below, download MANO models and code (mano_v1_2.zip) from the MANO website and place the file under handover-sim/handover/data/.

cd handover-sim

# Install handover-sim and submodule mano_pybullet as Python package.
pip install --no-deps -e .
pip install --no-deps -e ./mano_pybullet

cd handover/data

# Unzip mano_v1_2.zip.
unzip mano_v1_2.zip

# Download DexYCB dataset.
gdown 1Jqe2iqI7inoEdE3BL4vEs25eT5M7aUHd
tar zxvf dex-ycb-cache-20220323.tar.gz

# Compile assets.
gdown 1tDiXvW5vwJDOCgK61VEsFaZ7Z00gF0vj
tar zxvf assets-3rd-party-20220511.tar.gz
cd ../..
./handover/data/compile_assets.sh

cd ..

For more details, see the handover-sim repo.

GA-DDPG (submodule)

cd GA-DDPG

# Install Pointnet2_PyTorch as Python package.
git clone https://github.com/liruiw/Pointnet2_PyTorch
cd Pointnet2_PyTorch
git checkout dabe33a
pip install --no-deps -e ./pointnet2_ops_lib
cd ..

# Download data.
gdown 136rLjyjFFRMyVxUZT6txB5XR2Ct_LNWC
unzip shared_data.zip -d data

cd ..

For more details, see the GA-DDPG repo.

OMG-Planner (submodule): Can be skipped if you are not running Training.

# Install Ubuntu packages.
# - libassimp-dev is required for pyassimp.
# - libegl-dev is required for ycb_renderer.
# - libgles2 is required for ycb_renderer.
# - libglib2.0-0 is required for opencv-python.
# - libxslt1-dev is required for lxml.
apt install \
    libassimp-dev \
    libegl-dev \
    libgles2 \
    libglib2.0-0 \
    libxslt1-dev

cd OMG-Planner

# Install ycb_render.
cd ycb_render
python setup.py develop
cd ..

# Install eigen.
git clone https://gitlab.com/libeigen/eigen.git
cd eigen
git checkout 3.4.0
mkdir -p release && mkdir -p build && cd build
cmake .. \
  -DCMAKE_INSTALL_PREFIX=$( cd ../release && pwd )
make -j8
make install
cd ../..

# Install Sophus.
cd Sophus
mkdir -p release && mkdir -p build && cd build
cmake .. \
  -DCMAKE_INSTALL_PREFIX=$( cd ../release && pwd ) \
  -DEIGEN3_INCLUDE_DIR=$( cd ../../eigen/release/include/eigen3 && pwd )
make -j8
make install
cd ../..

# Install layers.
cd layers
sed -i "s@/usr/local/include/eigen3\", \"/usr/local/include@$( cd ../eigen/release/include/eigen3 && pwd )\", \"$( cd ../Sophus/release/include && pwd )@g" setup.py
python setup.py install
cd ..

# Install PyKDL.
cd orocos_kinematics_dynamics
cd sip-4.19.3
python configure.py
make -j8
make install
cd ../orocos_kdl
mkdir -p release && mkdir -p build && cd build
cmake .. \
  -DCMAKE_INSTALL_PREFIX=$( cd ../release && pwd ) \
  -DEIGEN3_INCLUDE_DIR=$( cd ../../../eigen/release/include/eigen3 && pwd )
make -j8
make install
cd ../../python_orocos_kdl
mkdir -p build && cd build
# ** IF YOU USE VIRTUALENV: USE $VIRTUAL_ENV BELOW **
# ** IF YOU USE CONDA: REMOVE THE -DPYTHON_EXECUTABLE FLAG **
# ** IF YOU USE NEITHER VIRTUALENV NOR CONDA: YOU MAY NEED TO EDIT -DPYTHON_EXECUTABLE **
cmake .. \
  -DPYTHON_EXECUTABLE=$VIRTUAL_ENV/bin/python \
  -DCMAKE_PREFIX_PATH=$( cd ../../orocos_kdl/release && pwd )
make -j8
# ** IF YOU USE CONDA: REPLACE $VIRTUAL_ENV WITH $CONDA_PREFIX **
cp PyKDL.so $VIRTUAL_ENV/lib/python3.8/site-packages
cd ../../..

# Download data.
gdown 1tHPAQ2aPdkp8cwtFP4gs4wdcP02jfGpH
unzip data.zip

cd ..

For more details, see the OMG-Planner repo.

Quick Demo with Pre-trained Model

Download the CVPR 2023 pre-trained models and grasp predictor:

# Download CVPR 2023 models.
./output/fetch_cvpr2023_models.sh

# Download grasp predictor.
./output/fetch_grasp_trigger_PRE_2.sh

Run:

GADDPG_DIR=GA-DDPG CUDA_VISIBLE_DEVICES=0 python examples/test.py \
  --model-dir output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train \
  --without-hold \
  SIM.RENDER True \
  SIM.INIT_VIEWER_CAMERA_POSITION "(+1.6947, -0.1000, +1.6739)" \
  SIM.INIT_VIEWER_CAMERA_TARGET "(+0.0200, -0.1000, +0.9100)"

This will:

Open a visualizer window.
Go through each scene in the test split of s0 (see handover-sim for more details).
Execute the actions generated from the without hold (aka simultaneous) policy using the pre-trained model output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train.

Training

We follow the protocol of the handover-sim benchmark for training and testing. Below we show how to train a model on the train split of the s0 setup.

The training process comprises two stages:

pretraining.
finetuning.

See the CVPR 2023 paper for more details.

First, download the grasp predictor if you have not:

# Download grasp predictor.
./output/fetch_grasp_trigger_PRE_2.sh

For the pretraining stage, run:
```
GADDPG_DIR=GA-DDPG OMG_PLANNER_DIR=OMG-Planner CUDA_VISIBLE_DEVICES=0 python examples/train.py \
  --cfg-file examples/pretrain.yaml \
  --seed 1 \
  --use-ray
```
This will:
1. Start the training from scratch with random seed 1.
2. Use Ray to spawn mutiple worker processes (3 by default) for collecting training experiences.
3. Save training output and checkpoints to a new folder output/*_pretrain_1_s0_train/.
The training statistics are logged in the TensorBoard format. You can launch TensorBoard with:
```
tensorboard --logdir output
```
Depending on your compute configuration, the pretraining job may take from sub-day to days to complete.
Once the pretraining job completes, you can proceed to the finetuning stage. Or if you have downloaded the CVPR 2023 pre-trained models, you can also start from the pretraining models there and skip running the pretraining stage yourself.

To run finetuning, you need to give an output folder from pretraining. For example, if your pretraining output folder is output/2022-09-30_11-54-42_pretrain_1_s0_train/, run:
```
GADDPG_DIR=GA-DDPG OMG_PLANNER_DIR=OMG-Planner CUDA_VISIBLE_DEVICES=0 python examples/train.py \
  --cfg-file examples/finetune.yaml \
  --seed 1 \
  --use-ray \
  --use-grasp-predictor \
  --pretrained-dir output/2022-09-30_11-54-42_pretrain_1_s0_train
```
This will:
1. Start the training from the latest pretraining checkpoint with random seed 1.
2. Like in pretraining, use Ray to spawn mutiple worker processes (3 by default) for collecting training experiences.
3. Additionally use the grasp predictor to predict whether to execute grasping.
4. Save training output and checkpoints to a new folder output/*_finetune_1_s0_train/.
Likewise, the training statistics are logged in the TensorBoard format. You can launch TensorBoard with the same command:
```
tensorboard --logdir output
```
Likewise, depending on your compute configuration, the finetuning job may take from sub-day to days to complete.
As described in the CVPR 2023 paper, the results we report are averaged over 3 training runs (pretraining + finetuning) with different random seeds. You can change the random seed by changing the argument of --seed in the commands above, e.g., from 1 to 2, 3, 4, 5, etc.

Reproducibility and Ray

As described above, we use Ray to speed up training by spawning multiple worker processes. However, this also makes data collection asynchronous and therefore the training process non-deterministic.

For development and debugging purposes, it may be beneficial to enforce reproducibility. Therefore, we also provide a way to run training with Ray disabled. However, the job will also take longer to complete, since we can only use one process to run data collection together with other training routines.

To disable Ray, you just need to remove the --use-ray flag.

For the pretraining stage, run:

GADDPG_DIR=GA-DDPG OMG_PLANNER_DIR=OMG-Planner CUDA_VISIBLE_DEVICES=0 python examples/train.py \
  --cfg-file examples/pretrain.yaml \
  --seed 1

For the finetuning stage, if your pretraining output folder is output/2022-09-30_11-54-42_pretrain_1_s0_train/, run:

GADDPG_DIR=GA-DDPG OMG_PLANNER_DIR=OMG-Planner CUDA_VISIBLE_DEVICES=0 python examples/train.py \
  --cfg-file examples/finetune.yaml \
  --seed 1 \
  --use-grasp-predictor \
  --pretrained-dir output/2022-09-30_11-54-42_pretrain_1_s0_train

Testing

Again, we follow the protocol of the handover-sim benchmark for training and testing. Below we show how to test a trained model on the test split of the s0 setup.

We test with two settings for the policy:

hold (aka sequential, same as the setting in the pretraining stage).
without-hold (aka simultaneous, same as the setting in the finetuning stage).

See the CVPR 2023 paper Sec. 5.1 "Simulation Evaluation" for more details.

We first provide an example by testing on the CVPR 2023 pre-trained models

First, download the CVPR 2023 pre-trained models and grasp predictor if you have not:

# Download CVPR 2023 models.
./output/fetch_cvpr2023_models.sh

# Download grasp predictor.
./output/fetch_grasp_trigger_PRE_2.sh

For example, to test the model in output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train/, run:
```
GADDPG_DIR=GA-DDPG CUDA_VISIBLE_DEVICES=0 python examples/test.py \
  --model-dir output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train \
  SIM.RENDER True
```
This will:
1. Open a visualizer window.
2. Go through each scene in the test split of s0.
3. Execute the actions generated from the hold (aka sequential) policy using the model in output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train/.
To switch from the hold (aka sequential) policy to the without-hold (aka simultaneous) policy, just add a --without-hold flag:
```
GADDPG_DIR=GA-DDPG CUDA_VISIBLE_DEVICES=0 python examples/test.py \
  --model-dir output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train \
  --without-hold \
  SIM.RENDER True
```
This is exactly what we ran in the quick demo above.
The two commands above are mostly just for visualization purposes, and thus do not save the benchmark result. To save the result for evaluation later, set BENCHMARK.SAVE_RESULT to True, and remove SIM.RENDER to run headless if you don't need the visualizer window. Also you can optionally add a --name argument to for the name of the folder where the results will be saved.

For example, to test the model in output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train/ with the hold (aka sequential) policy, run:
```
GADDPG_DIR=GA-DDPG CUDA_VISIBLE_DEVICES=0 python examples/test.py \
  --model-dir output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train \
  --name finetune_5 \
  BENCHMARK.SAVE_RESULT True
```
The result will be saved to a new folder results/*_handover-sim2real-hold_finetune_5_s0_test/.

Similary, to test the model in output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train/ with the without-hold (aka simultaneous) policy, run:
```
GADDPG_DIR=GA-DDPG CUDA_VISIBLE_DEVICES=0 python examples/test.py \
  --model-dir output/cvpr2023_models/2022-10-16_08-48-30_finetune_5_s0_train \
  --without-hold \
  --name finetune_5 \
  BENCHMARK.SAVE_RESULT True
```
The result will be saved to a new folder results/*_handover-sim2real-wo-hold_finetune_5_s0_test/.
Once the job finishes, you are ready to run evaluation and see the result. See the Evaluation section.
The full set of testing commands we used in the CVPR 2023 paper with the pre-trained models can be found in examples/all_cvpr2023_models_test.sh

Beside testing on the pre-trained models, you can also test your own trained model from the Training section. All you need is to set the --model-dir argument.

For example, to test the trained model in output/2023-10-19_00-00-00_finetune_1_s0_train/, for hold (aka sequential), run:

GADDPG_DIR=GA-DDPG CUDA_VISIBLE_DEVICES=0 python examples/test.py \
  --model-dir output/2023-10-19_00-00-00_finetune_1_s0_train \
  --name finetune_1 \
  BENCHMARK.SAVE_RESULT True

and for without-hold (aka simultaneous), run:

GADDPG_DIR=GA-DDPG CUDA_VISIBLE_DEVICES=0 python examples/test.py \
  --model-dir output/2023-10-19_00-00-00_finetune_1_s0_train \
  --without-hold \
  --name finetune_1 \
  BENCHMARK.SAVE_RESULT True

Again, once the job finishes, you are ready to run evaluation and see the result. See the Evaluation section.

Evaluation

We use the same code from handover-sim for evaluation. Also see their Evaluation section.

To evaluate the result of a testing run, all you need is the result folder generated from running the benchmark. For example, if your result folder is results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test/, run the following command:

python handover-sim/examples/evaluate_benchmark.py \
  --res_dir results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test

You should see an output similar to the following in the terminal:

```
2023-04-14 07:09:09: Running evaluation for results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test
2023-04-14 07:09:09: Evaluation results:
|  success rate   |    mean accum time (s)    |                    failure (%)                     |
|      (%)        |  exec  |  plan  |  total  |  hand contact   |   object drop   |    timeout     |
|:---------------:|:------:|:------:|:-------:|:---------------:|:---------------:|:--------------:|
| 68.06 ( 98/144) | 6.206  | 0.175  |  6.380  | 10.42 ( 15/144) | 15.97 ( 23/144) | 5.56 (  8/144) |
2023-04-14 07:09:09: Printing scene ids
2023-04-14 07:09:09: Success (98 scenes):
---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---
  0    1    3    4    5    6    7    8    9   10   12   14   15   16   18   19   20   21   22   23
 26   29   30   31   34   37   38   39   41   43   44   46   47   48   49   51   53   54   56   57
 59   60   62   64   66   67   68   69   70   71   72   73   74   75   76   78   80   81   82   86
 89   90   92   93   96   97  100  101  103  105  108  109  110  111  113  114  116  118  120  121
122  123  125  126  127  128  129  130  131  132  133  134  137  139  140  141  142  143
---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---
2023-04-14 07:09:09: Failure - hand contact (15 scenes):
---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---
  2   11   40   42   58   61   65   77   79   91   94   98  102  112  119
---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---
2023-04-14 07:09:09: Failure - object drop (23 scenes):
---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---
 13   17   25   27   28   35   36   45   52   55   63   83   84   85   88   95  106  107  115  117
135  136  138
---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---  ---
2023-04-14 07:09:09: Failure - timeout (8 scenes):
---  ---  ---  ---  ---  ---  ---  ---
 24   32   33   50   87   99  104  124
---  ---  ---  ---  ---  ---  ---  ---
2023-04-14 07:09:09: Evaluation complete.
```

The same output will also be logged to results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test/evaluate.log.

Reproducing CVPR 2023 Results

We provide the result folders of the benchmarks reported in the CVPR 2023 paper. You can run evaluation on these files and reproduce the exact numbers in the paper.

To run the evaluation, you need to first download the CVPR 2023 results.

# Download CVPR 2023 results.
./results/fetch_cvpr2023_results.sh

This will extract a folder results/cvpr2023_results/ containing the result folders.

You can now run evaluation on these result folders. For example, for Ours + simultaneous (aka without-hold) on s0 (see CVPR 2023 paper Tab. 1 and 2), run:

# Seed 1
python handover-sim/examples/evaluate_benchmark.py \
  --res_dir results/cvpr2023_results/2022-11-09_16-02-29_handover-sim2real-wo-hold_finetune_1_s0_test
# Seed 4
python handover-sim/examples/evaluate_benchmark.py \
  --res_dir results/cvpr2023_results/2022-11-09_17-27-28_handover-sim2real-wo-hold_finetune_4_s0_test
# Seed 5
python handover-sim/examples/evaluate_benchmark.py \
  --res_dir results/cvpr2023_results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test

If you averge the numbers over these three evaluation runs, you should be able to reproduce the corresponding numbers in the paper.

Also for 2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test, you should see the exact same result shown in the example of the Evaluation section.

The full set of evaluation commands can be found in examples/all_cvpr2023_results_eval.sh.

Rendering from Result and Saving Rendering

We use the same code from handover-sim for rendering from result and saving rendering. Also see their Rendering from Result and Saving Rendering section.

While you can run testing with a visualizer window by adding SIM.RENDER True (e.g., see the Testing section), you can also run headless and re-render the rollouts with a visualizer window after the fact—as long as you saved the result with BENCHMARK.SAVE_RESULT True.

For example, if your result folder is results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test/, run the following command:
```
python handover-sim/examples/render_benchmark.py \
  --res_dir results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test \
  SIM.RENDER True
```
This will run the same benchmark environment with a policy that simply loads and executes the actions from the saved result.

Consequently, if you have downloaded the CVPR 2023 results following the Reproducing CVPR 2023 Results Section, you can also try rendering from one of the downloaded result folders, for example:
```
python handover-sim/examples/render_benchmark.py \
  --res_dir results/cvpr2023_results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test \
  SIM.RENDER True
```
This allows you to visualize the rollouts in the CVPR 2023 results.
Apart from the visualizer window, you can also re-render the rollouts with an offscreen renderer and further save the rendered frame into .jpg files. These .jpg files can later further be converted into .mp4 video files for offline visualization.

For example, if your result folder is results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test/, run the following command:
```
python handover-sim/examples/render_benchmark.py \
  --res_dir results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test \
  ENV.RENDER_OFFSCREEN True \
  BENCHMARK.SAVE_OFFSCREEN_RENDER True
```
This will save the offscreen rendered frames to folders named after the scene ID (e.g., 000/, 001/, etc.) under results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test/. Each folder contains the rendered frames of one scene.

By default, the offscreen rendering will use Bullet's CPU based TinyRenderer, which may take a while to run. If you have a GPU, you may speed up rendering by using Bullet's hardware accelerated OpenGL rendering with EGL. If your result folder is results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test/, you can run:
```
./handover-sim/examples/render_benchmark_egl.sh results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test
```
Warning: Rendering frames for a full test split with hundreds of scenes may still take a couple of hours even with the GPU based OpenGL rendering.

Finally, once you have finished rendering the .jpg files for all the scenes, you can easily convert .jpg to .mp4 with ffmpeg. First, install ffmpeg if you have not, for example, with sudo apt install ffmpeg.

If your result folder is results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test/, you can then run:
```
./handover-sim/examples/generate_mp4_from_jpg.sh results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test
```
This will generate .mp4 files named after the scene ID (e.g., 000.mp4, 001.mp4, etc.) under results/2022-11-09_17-55-43_handover-sim2real-wo-hold_finetune_5_s0_test/. Each .mp4 is converted from the .jpg files of one scene.

Beyond `s0` Setup

The handover-sim benchmark provides four different setups (s0, s1, s2, s3), by splitting the scenes into different train, val, test splits. The commands provided above for training and testing will run on the s0 setup.

To run on other setups, you just need to set BENCHMARK.SETUP to the setup name in the training and testing commands (the default is s0).

Below we use s1 as an example. Simply change s1 to s2 or s3 for those setups.

For pretraining with random seed 1, run:

GADDPG_DIR=GA-DDPG OMG_PLANNER_DIR=OMG-Planner CUDA_VISIBLE_DEVICES=0 python examples/train.py \
  --cfg-file examples/pretrain.yaml \
  --seed 1 \
  --use-ray \
  BENCHMARK.SETUP s1

For finetuning with random seed 1, if your pretraining output folder is output/2023-10-18_00-00-00_pretrain_1_s1_train/, run:

GADDPG_DIR=GA-DDPG OMG_PLANNER_DIR=OMG-Planner CUDA_VISIBLE_DEVICES=0 python examples/train.py \
  --cfg-file examples/finetune.yaml \
  --seed 1 \
  --use-ray \
  --use-grasp-predictor \
  --pretrained-dir output/2023-10-18_00-00-00_pretrain_1_s1_train \
  BENCHMARK.SETUP s1

To test the trained model in output/2023-10-19_00-00-00_finetune_1_s1_train/, for hold (aka sequential), run:

GADDPG_DIR=GA-DDPG CUDA_VISIBLE_DEVICES=0 python examples/test.py \
  --model-dir output/2023-10-19_00-00-00_finetune_1_s1_train \
  --name finetune_1 \
  BENCHMARK.SETUP s1 \
  BENCHMARK.SAVE_RESULT True

and for without-hold (aka simultaneous), run:

GADDPG_DIR=GA-DDPG CUDA_VISIBLE_DEVICES=0 python examples/test.py \
  --model-dir output/2023-10-19_00-00-00_finetune_1_s1_train \
  --without-hold \
  --name finetune_1 \
  BENCHMARK.SETUP s1 \
  BENCHMARK.SAVE_RESULT True

For evaluation and rendering, the same instructions provided in the previous sections apply to all the setups (see Evaluation and Rendering from Result and Saving Rendering). All you need is to set --res_dir to the result directory generated by testing.

Name		Name	Last commit message	Last commit date
Latest commit History 6 Commits
GA-DDPG @ e4d08df		GA-DDPG @ e4d08df
OMG-Planner @ 0608db0		OMG-Planner @ 0608db0
docs		docs
examples		examples
handover-sim @ 292bb04		handover-sim @ 292bb04
handover_sim2real		handover_sim2real
output		output
results		results
tests		tests
.gitignore		.gitignore
.gitmodules		.gitmodules
LICENSE		LICENSE
MANIFEST.in		MANIFEST.in
README.md		README.md
pyproject.toml		pyproject.toml
setup.cfg		setup.cfg
setup.py		setup.py

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Handover-Sim2Real

Citing Handover-Sim2Real

License

Acknowledgements

Contents

Prerequisites

Installation

Quick Demo with Pre-trained Model

Training

Reproducibility and Ray

Testing

Evaluation

Reproducing CVPR 2023 Results

Rendering from Result and Saving Rendering

Beyond `s0` Setup

About

Releases

Packages

Languages

License

NVlabs/handover-sim2real

Folders and files

Latest commit

History

Repository files navigation

Handover-Sim2Real

Citing Handover-Sim2Real

License

Acknowledgements

Contents

Prerequisites

Installation

Quick Demo with Pre-trained Model

Training

Reproducibility and Ray

Testing

Evaluation

Reproducing CVPR 2023 Results

Rendering from Result and Saving Rendering

Beyond s0 Setup

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Beyond `s0` Setup

Packages