Fix references to rc.d scripts. This package uses RCD_SCRIPTS

which installs to ${RCD_SCRIPTS_EXAMPLEDIR}. But the MESSAGE
referred to wrong hard-coded location if the RCD_SCRIPTS_EXAMPLEDIR
was not the default. So use RCD_SCRIPTS_EXAMPLEDIR instead.

PKGREVISION not bumped because if someone had changed
RCD_SCRIPTS_EXAMPLEDIR before recent change of autoregistration
of rc.d script in PLIST, then it could not have been packaged
in first place.

Note that this commit does not imply that the MESSAGE is correct.
In some cases, the MESSAGE is clearly wrong such as suggesting
running the rc.d script from the example directory (which will work
although).

inputmethod/canna-server/MESSAGE

@@ -1,9 +1,9 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.1 2003/09/23 15:14:55 uebayasi Exp $
+$NetBSD: MESSAGE,v 1.2 2004/04/23 22:43:20 reed Exp $
 
 If you want Canna server to boot automatically, 
 
-	1) Copy ${PREFIX}/etc/rc.d/canna to /etc/rc.d/.
+	1) Copy ${RCD_SCRIPTS_EXAMPLEDIR}/canna to /etc/rc.d/.
 	2) Add the following line to /etc/rc.conf.
 
 		canna=YES	canna_flags="-u ${CANNA_USER}"

mail/exim/MESSAGE

@@ -1,5 +1,5 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.5 2004/02/13 23:46:25 snj Exp $
+$NetBSD: MESSAGE,v 1.6 2004/04/23 22:43:20 reed Exp $
 
 To use exim, you will need to perform the following steps manually; it is
 inappropriate for this package to make the changes for you.
@@ -11,7 +11,7 @@ inappropriate for this package to make the changes for you.
    Copy ${EXAMPLESDIR}/mailer.conf to /etc/mailer.conf.
 4. Set 'sendmail=NO', 'exim=YES' and exim_flags to some sane value in
    /etc/rc.conf (previously it was "-bd -q15m").
-   Copy ${PREFIX}/etc/rc.d/exim to /etc/rc.d.
+   Copy ${RCD_SCRIPTS_EXAMPLEDIR}/exim to /etc/rc.d.
 5. Configuring log rotation is dependent on personal taste and the version
    of NetBSD in use.  See weekly.conf(5), newsyslog(8), exicyclog and
    eximstats.

mail/nullmailer/MESSAGE

@@ -1,5 +1,5 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.2 2003/02/17 05:20:20 salo Exp $
+$NetBSD: MESSAGE,v 1.3 2004/04/23 22:43:20 reed Exp $
 
 To use nullmailer, you will need to perform the following steps:
 
@@ -13,7 +13,7 @@ To use nullmailer, you will need to perform the following steps:
    ${PREFIX}/share/examples/nullmailer/mailer.conf
 
 3. In case you don't have PKG_RCD_SCRIPTS set in your /etc/mk.conf, copy
-   ${PREFIX}etc/rc.d/nullmailer to /etc/rc.d/nullmailer and add
+   ${RCD_SCRIPTS_EXAMPLEDIR}/nullmailer to /etc/rc.d/nullmailer and add
 
 	nullmailer=YES
 

mail/teapop/MESSAGE

@@ -1,8 +1,8 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.4 2002/07/15 22:57:28 heinz Exp $
+$NetBSD: MESSAGE,v 1.5 2004/04/23 22:43:20 reed Exp $
 
 You may also wish to:
-        cp ${PREFIX}/etc/rc.d/teapop /etc/rc.d/teapop
+        cp ${RCD_SCRIPTS_EXAMPLEDIR}/teapop /etc/rc.d/teapop
         echo "teapop=YES" >> /etc/rc.conf
 
 ===========================================================================

net/delegate/MESSAGE

@@ -1,7 +1,7 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.4 2003/07/30 11:37:01 jmmv Exp $
+$NetBSD: MESSAGE,v 1.5 2004/04/23 22:43:20 reed Exp $
 
-Now copy the sample script in ${PREFIX}/etc/rc.d/delegated to
+Now copy the sample script in ${RCD_SCRIPTS_EXAMPLEDIR}/delegated to
 /etc/rc.d/delegated and edit it according to your needs.
 
 Don't forget to specify a correct e-mail address for ADMIN.

net/pure-ftpd/MESSAGE

@@ -1,10 +1,10 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.1.1.1 2003/07/12 14:43:08 salo Exp $
+$NetBSD: MESSAGE,v 1.2 2004/04/23 22:43:20 reed Exp $
 
 To use pure-ftpd, you will need to perform the following steps:
 
 1. In case you don't have PKG_RCD_SCRIPTS set in your /etc/mk.conf, copy
-   ${PREFIX}/etc/rc.d/pure_ftpd to /etc/rc.d/pure_ftpd and add
+   ${RCD_SCRIPTS_EXAMPLEDIR}/pure_ftpd to /etc/rc.d/pure_ftpd and add
 
 	pure_ftpd=YES
 

net/snort/MESSAGE

@@ -1,10 +1,10 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.1 2003/03/04 01:02:25 salo Exp $
+$NetBSD: MESSAGE,v 1.2 2004/04/23 22:43:20 reed Exp $
 
 To use snort, you will need to perform the following steps:
 
 1. In case you don't have PKG_RCD_SCRIPTS set in your /etc/mk.conf, copy
-   ${PREFIX}/etc/rc.d/snort to /etc/rc.d/snort and add
+   ${RCD_SCRIPTS_EXAMPLEDIR}/snort to /etc/rc.d/snort and add
 
 	snort=YES
 

security/sfs/MESSAGE

@@ -1,13 +1,13 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.4 2003/09/08 13:38:12 itojun Exp $
+$NetBSD: MESSAGE,v 1.5 2004/04/23 22:43:20 reed Exp $
 
 Quick Client Setup:
 
 1. Add to /etc/rc.conf:
 
 sfscd=YES
 
-2. Run: ${PREFIX}/etc/rc.d/sfscd start
+2. Run: ${RCD_SCRIPTS_EXAMPLEDIR}/sfscd start
 3. cd /sfs/sfs.fs.net:eu4cvv6wcnzscer98yn4qjpjnn9iv6pi
 4. cat CONGRATULATIONS
 
@@ -24,6 +24,6 @@ sfssd=YES
    ${PKG_SYSCONFDIR}/sfsrwsd_config and modify.
 4. Modify /etc/exports to match your sfsrwsd_config.
 5. Create the root directories in ${SFSDIR}/root.
-6. Run ${PREFIX}/etc/rc.d/sfssd start
+6. Run ${RCD_SCRIPTS_EXAMPLEDIR}/sfssd start
 
 ===========================================================================

sysutils/bkpupsd/MESSAGE

@@ -1,12 +1,12 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.3 2003/07/31 11:07:30 jmmv Exp $
+$NetBSD: MESSAGE,v 1.4 2004/04/23 22:43:20 reed Exp $
 
 ${DOCDIR}/rc.conf.d.sample contains some shell variables
 for helping bkpupsd start up.
 
 Simple way to install NetBSD 1.5 or later is below.
 
-(1) Copy ${PREFIX}/etc/rc.d/bkpupsd to ${RCD_SCRIPTS_DIR}/rc.d/bkpupsd.
+(1) Copy ${RCD_SCRIPTS_EXAMPLEDIR}/bkpupsd to ${RCD_SCRIPTS_DIR}/rc.d/bkpupsd.
 (2) Append ${DOCDIR}/rc.conf.d.sample to /etc/rc.conf.
 (3) Edit /etc/rc.conf for your needs, serial device and UPS type for
     example.

www/jakarta-tomcat/MESSAGE

@@ -1,5 +1,5 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.3 2002/12/28 21:09:15 jlam Exp $
+$NetBSD: MESSAGE,v 1.4 2004/04/23 22:43:20 reed Exp $
 
 For detailed instructions on how to run Tomcat, either as a
 standalone server or in conjunction with Apache (using the
@@ -13,6 +13,6 @@ For more information on application development with Tomcat, see
 
 Note that tomcat may be started with the following command:
 
-	${PREFIX}/etc/rc.d/tomcat start
+	${RCD_SCRIPTS_EXAMPLEDIR}/tomcat start
 
 ===========================================================================

www/tinyproxy/MESSAGE

@@ -1,10 +1,10 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.1.1.1 2003/03/07 23:46:01 salo Exp $
+$NetBSD: MESSAGE,v 1.2 2004/04/23 22:43:20 reed Exp $
 
 To use tinyproxy, you will need to perform the following steps:
 
 1. In case you don't have PKG_RCD_SCRIPTS set in your /etc/mk.conf, copy
-   ${PREFIX}/etc/rc.d/tinyproxy to /etc/rc.d/tinyproxy and add
+   ${RCD_SCRIPTS_EXAMPLEDIR}/tinyproxy to /etc/rc.d/tinyproxy and add
 
 	tinyproxy=YES
 

www/wwwoffle/MESSAGE

@@ -1,13 +1,13 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.3 2002/09/24 12:30:51 wiz Exp $
+$NetBSD: MESSAGE,v 1.4 2004/04/23 22:43:20 reed Exp $
 
 1) To enable "wwwwoffled" to start on boot on NetBSD-1.5 or newer,
-please copy "${PREFIX}/etc/rc.d/wwwoffled" to "/etc/rc.d/" and add
+please copy "${RCD_SCRIPTS_EXAMPLEDIR}/wwwoffled" to "/etc/rc.d/" and add
 "wwwoffled=YES" to /etc/rc.conf. To do the same on older systems,
 add the following to /etc/rc.local:
 
-if [ -x ${PREFIX}/etc/rc.d/wwwoffle ]; then
-    ${PREFIX}/etc/rc.d/wwwoffle
+if [ -x ${RCD_SCRIPTS_EXAMPLEDIR}/wwwoffle ]; then
+    ${RCD_SCRIPTS_EXAMPLEDIR}/wwwoffle
 fi
 
 2) The hooks are present to to use the package version of "htdig",

x11/wdm/MESSAGE

@@ -1,10 +1,10 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.1 2003/02/23 17:33:31 salo Exp $
+$NetBSD: MESSAGE,v 1.2 2004/04/23 22:43:20 reed Exp $
 
 To use wdm, you will need to perform the following steps:
 
 1. In case you don't have PKG_RCD_SCRIPTS set in your /etc/mk.conf, copy
-   ${PREFIX}/etc/rc.d/wdm to /etc/rc.d/wdm and add the following
+   ${RCD_SCRIPTS_EXAMPLEDIR}/wdm to /etc/rc.d/wdm and add the following
    line into your /etc/rc.conf
 
 	wdm=YES

x11/xfstt/MESSAGE

@@ -1,5 +1,5 @@
 ===========================================================================
-$NetBSD: MESSAGE,v 1.4 2004/01/25 20:46:19 wiz Exp $
+$NetBSD: MESSAGE,v 1.5 2004/04/23 22:43:20 reed Exp $
 
 To use xfstt, you will need to perform the following steps:
 
@@ -10,7 +10,7 @@ To use xfstt, you will need to perform the following steps:
 	${PREFIX}/lib/X11/fonts/TTF/
 
 2. In case you don't have PKG_RCD_SCRIPTS set in your /etc/mk.conf, copy
-   ${PREFIX}/etc/rc.d/xfstt to /etc/rc.d/xfstt and add the following
+   ${RCD_SCRIPTS_EXAMPLEDIR}/xfstt to /etc/rc.d/xfstt and add the following
    line into your /etc/rc.conf
 
 	xfstt=YES