Evic is a USB programmer for devices based on the Joyetech Evic VTC Mini.
- Evic VTC Mini
- Cuboid Mini
- Cuboid
- eGrip II*
- iStick TC100W*
- iStick Pico*
- Presa TC75W*
- Vaporflask Classic*
- Vaporflask Lite*
- Vaporflask Stout*
- Reuleaux RX200
- Reuleaux RX200S
*Untested
- Evic VTC Mini <=3.02
- Presa TC75W 1.02*
- RX200 3.10
- RX200S 4.10
- Examples from evic-sdk
*Flashing Presa firmware to a VTC Mini requires changing the hardware version on some devices. Backup your data flash before flashing!
Download Ubuntu-Install.sh from the Installers directory. Right click > Properties > Mark Executable. It will automatically download and install all of the required dependencies and evic-usb.
Using evic-usb requires cython-hidapi. You can install it using pip:
$ pip install hidapi click setuptools pil
Building cython-hidapi requires libusb headers and cython. On Arch Linux they can be obtained from the repositories by installing packages libusb and cython. Debian based distributions will have packages libusb-1.0-0-dev and cython.
On Windows you will also need the correct compiler for your Python version. See this page for more information on setting up the compiler.
Building python-evic:
$ git clone git://github.com/Ban3/python-evic.git $ cd python-evic $ python setup.py install
The file udev/99-nuvoton-hid.rules contains an example set of rules for setting the device permissions to 0666. Copy the file to the directory /etc/udev/rules.d/ to use it.
See --help for more information on a given command.
evic-convert is a tool to encrypt/decrypt firmware images:
$ evic-convert in.bin -o out.bin
evic-usb is a tool for interfacing with the device through USB.
Dump device data flash to a file:
$ evic-usb dump-dataflash -o out.bin
Upload an encrypted firmware image to the device:
$ evic-usb upload firmware.bin
Upload an unencrypted firmware image to the device:
$ evic-usb upload -u firmware.bin
Upload a firmware image using data flash from a file:
$ evic-usb upload -d data.bin firmware.bin
Use --no-verify to disable verification for APROM or data flash. To disable both:
$ evic-usb upload --no-verify aprom --no-verify dataflash firmware.bin