Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
  macvlan: fix panic if lowerdev in a bond
  tg3: Add braces around 5906 workaround.
  tg3: Fix NETIF_F_LOOPBACK error
  macvlan: remove one synchronize_rcu() call
  networking: NET_CLS_ROUTE4 depends on INET
  irda: Fix error propagation in ircomm_lmp_connect_response()
  irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
  irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
  be2net: Kill set but unused variable 'req' in lancer_fw_download()
  irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
  atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
  rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
  pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
  isdn: capi: Use pr_debug() instead of ifdefs.
  tg3: Update version to 3.119
  tg3: Apply rx_discards fix to 5719/5720
  ...

Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.

Documentation/ABI/testing/sysfs-bus-bcma

@@ -0,0 +1,31 @@
+What:		/sys/bus/bcma/devices/.../manuf
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <[email protected]>
+Description:
+		Each BCMA core has it's manufacturer id. See
+		include/linux/bcma/bcma.h for possible values.
+
+What:		/sys/bus/bcma/devices/.../id
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <[email protected]>
+Description:
+		There are a few types of BCMA cores, they can be identified by
+		id field.
+
+What:		/sys/bus/bcma/devices/.../rev
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <[email protected]>
+Description:
+		BCMA cores of the same type can still slightly differ depending
+		on their revision. Use it for detailed programming.
+
+What:		/sys/bus/bcma/devices/.../class
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <[email protected]>
+Description:
+		Each BCMA core is identified by few fields, including class it
+		belongs to. See include/linux/bcma/bcma.h for possible values.

Documentation/feature-removal-schedule.txt

@@ -35,17 +35,6 @@ Who:	Luis R. Rodriguez <[email protected]>
 
 ---------------------------
 
-What:	AR9170USB
-When:	2.6.40
-
-Why:	This driver is deprecated and the firmware is no longer
-	maintained. The replacement driver "carl9170" has been
-	around for a while, so the devices are still supported.
-
-Who:	Christian Lamparter <[email protected]>
-
----------------------------
-
 What:	IRQF_SAMPLE_RANDOM
 Check:	IRQF_SAMPLE_RANDOM
 When:	July 2009
@@ -405,16 +394,6 @@ Who: 	anybody or Florian Mickler <[email protected]>
 
 ----------------------------
 
-What:	capifs
-When:	February 2011
-Files:	drivers/isdn/capi/capifs.*
-Why:	udev fully replaces this special file system that only contains CAPI
-	NCCI TTY device nodes. User space (pppdcapiplugin) works without
-	noticing the difference.
-Who:	Jan Kiszka <[email protected]>
-
-----------------------------
-
 What:	KVM paravirt mmu host support
 When:	January 2011
 Why:	The paravirt mmu host support is slower than non-paravirt mmu, both

Documentation/networking/batman-adv.txt

@@ -1,4 +1,4 @@
-[state: 27-01-2011]
+[state: 17-04-2011]
 
 BATMAN-ADV
 ----------
@@ -19,6 +19,7 @@ duce the overhead to a minimum. It does not depend on any (other)
 network driver, and can be used on wifi as well as ethernet  lan,
 vpn,  etc ... (anything with ethernet-style layer 2).
 
+
 CONFIGURATION
 -------------
 
@@ -160,13 +161,13 @@ face.  Each  entry can/has to have the following values:
 -> "TQ mac  value"  -  src mac's link quality towards mac address
                        of a neighbor originator's interface which
                        is being used for routing
--> "HNA mac" - HNA announced by source mac
+-> "TT mac" - TT announced by source mac
 -> "PRIMARY" - this  is a primary interface
 -> "SEC mac" - secondary mac address of source
                (requires preceding PRIMARY)
 
 The TQ value has a range from 4 to 255 with 255 being  the  best.
-The HNA entries are showing which hosts are connected to the mesh
+The TT entries are showing which hosts are connected to the mesh
 via bat0 or being bridged into the mesh network.  The PRIMARY/SEC
 values are only applied on primary interfaces
 
@@ -199,15 +200,15 @@ abled  during run time. Following log_levels are defined:
 
 0 - All  debug  output  disabled
 1 - Enable messages related to routing / flooding / broadcasting
-2 - Enable route or hna added / changed / deleted
+2 - Enable route or tt entry added / changed / deleted
 3 - Enable all messages
 
 The debug output can be changed at runtime  using  the  file
 /sys/class/net/bat0/mesh/log_level. e.g.
 
 # echo 2 > /sys/class/net/bat0/mesh/log_level
 
-will enable debug messages for when routes or HNAs change.
+will enable debug messages for when routes or TTs change.
 
 
 BATCTL

Documentation/networking/bonding.txt

@@ -1,7 +1,7 @@
 
 		Linux Ethernet Bonding Driver HOWTO
 
-		Latest update: 23 September 2009
+		Latest update: 27 April 2011
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -585,25 +585,23 @@ mode
 		chosen.
 
 num_grat_arp
-
-	Specifies the number of gratuitous ARPs to be issued after a
-	failover event.  One gratuitous ARP is issued immediately after
-	the failover, subsequent ARPs are sent at a rate of one per link
-	monitor interval (arp_interval or miimon, whichever is active).
-
-	The valid range is 0 - 255; the default value is 1.  This option
-	affects only the active-backup mode.  This option was added for
-	bonding version 3.3.0.
-
 num_unsol_na
 
-	Specifies the number of unsolicited IPv6 Neighbor Advertisements
-	to be issued after a failover event.  One unsolicited NA is issued
-	immediately after the failover.
-
-	The valid range is 0 - 255; the default value is 1.  This option
-	affects only the active-backup mode.  This option was added for
-	bonding version 3.4.0.
+	Specify the number of peer notifications (gratuitous ARPs and
+	unsolicited IPv6 Neighbor Advertisements) to be issued after a
+	failover event.  As soon as the link is up on the new slave
+	(possibly immediately) a peer notification is sent on the
+	bonding device and each VLAN sub-device.  This is repeated at
+	each link monitor interval (arp_interval or miimon, whichever
+	is active) if the number is greater than 1.
+
+	The valid range is 0 - 255; the default value is 1.  These options
+	affect only the active-backup mode.  These options were added for
+	bonding versions 3.3.0 and 3.4.0 respectively.
+
+	From Linux 2.6.40 and bonding version 3.7.1, these notifications
+	are generated by the ipv4 and ipv6 code and the numbers of
+	repetitions cannot be set independently.
 
 primary
 

Documentation/networking/igb.txt

@@ -93,6 +93,19 @@ Additional Configurations
   REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
   found, the system will fallback to MSI or to Legacy interrupts.
 
+  MAC and VLAN anti-spoofing feature
+  ----------------------------------
+  When a malicious driver attempts to send a spoofed packet, it is dropped by
+  the hardware and not transmitted.  An interrupt is sent to the PF driver
+  notifying it of the spoof attempt.
+
+  When a spoofed packet is detected the PF driver will send the following
+  message to the system log (displayed by  the "dmesg" command):
+
+  Spoof event(s) detected on VF(n)
+
+  Where n=the VF that attempted to do the spoofing.
+
 Support
 =======
 

Documentation/sysctl/net.txt

@@ -32,6 +32,17 @@ Table : Subdirectories in /proc/sys/net
 1. /proc/sys/net/core - Network core options
 -------------------------------------------------------
 
+bpf_jit_enable
+--------------
+
+This enables Berkeley Packet Filter Just in Time compiler.
+Currently supported on x86_64 architecture, bpf_jit provides a framework
+to speed packet filtering, the one used by tcpdump/libpcap for example.
+Values :
+	0 - disable the JIT (default value)
+	1 - enable the JIT
+	2 - enable the JIT and ask the compiler to emit traces on kernel log.
+
 rmem_default
 ------------
 

MAINTAINERS

@@ -1232,13 +1232,6 @@ W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
-ATHEROS AR9170 WIRELESS DRIVER
-M:	Christian Lamparter <[email protected]>
-L:	[email protected]
-W:	http://wireless.kernel.org/en/users/Drivers/ar9170
-S:	Obsolete
-F:	drivers/net/wireless/ath/ar9170/
-
 CARL9170 LINUX COMMUNITY WIRELESS DRIVER
 M:	Christian Lamparter <[email protected]>
 L:	[email protected]
@@ -3363,6 +3356,12 @@ F:	Documentation/wimax/README.i2400m
 F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
+INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
+M:	Stanislaw Gruszka <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	drivers/net/wireless/iwlegacy/
+
 INTEL WIRELESS WIFI LINK (iwlwifi)
 M:	Wey-Yi Guy <[email protected]>
 M:	Intel Linux Wireless <[email protected]>
@@ -4385,6 +4384,7 @@ S:	Maintained
 F:	net/ipv4/
 F:	net/ipv6/
 F:	include/net/ip*
+F:	arch/x86/net/*
 
 NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
 M:	Paul Moore <[email protected]>
@@ -5832,6 +5832,13 @@ S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
 
+BROADCOM SPECIFIC AMBA DRIVER (BCMA)
+M:	Rafał Miłecki <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/bcma/
+F:	include/linux/bcma/
+
 SONY VAIO CONTROL DEVICE DRIVER
 M:	Mattia Dongili <[email protected]>
 L:	[email protected]

arch/mips/txx9/generic/setup_tx4939.c

@@ -318,19 +318,15 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
 }
 
 #if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
-static int tx4939_get_eth_speed(struct net_device *dev)
+static u32 tx4939_get_eth_speed(struct net_device *dev)
 {
-	struct ethtool_cmd cmd = { ETHTOOL_GSET };
-	int speed = 100;	/* default 100Mbps */
-	int err;
-	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
-		return speed;
-	err = dev->ethtool_ops->get_settings(dev, &cmd);
-	if (err < 0)
-		return speed;
-	speed = cmd.speed == SPEED_100 ? 100 : 10;
-	return speed;
+	struct ethtool_cmd cmd;
+	if (dev_ethtool_get_settings(dev, &cmd))
+		return 100;	/* default 100Mbps */
+
+	return ethtool_cmd_speed(&cmd);
 }
+
 static int tx4939_netdev_event(struct notifier_block *this,
 			       unsigned long event,
 			       void *ptr)
@@ -343,8 +339,7 @@ static int tx4939_netdev_event(struct notifier_block *this,
 		else if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(1))
 			bit = TX4939_PCFG_SPEED1;
 		if (bit) {
-			int speed = tx4939_get_eth_speed(dev);
-			if (speed == 100)
+			if (tx4939_get_eth_speed(dev) == 100)
 				txx9_set64(&tx4939_ccfgptr->pcfg, bit);
 			else
 				txx9_clear64(&tx4939_ccfgptr->pcfg, bit);

arch/powerpc/include/asm/systbl.h

@@ -352,3 +352,4 @@ SYSCALL_SPU(name_to_handle_at)
 COMPAT_SYS_SPU(open_by_handle_at)
 COMPAT_SYS_SPU(clock_adjtime)
 SYSCALL_SPU(syncfs)
+COMPAT_SYS_SPU(sendmmsg)

arch/powerpc/include/asm/unistd.h

@@ -371,10 +371,11 @@
 #define __NR_open_by_handle_at	346
 #define __NR_clock_adjtime	347
 #define __NR_syncfs		348
+#define __NR_sendmmsg		349
 
 #ifdef __KERNEL__
 
-#define __NR_syscalls		349
+#define __NR_syscalls		350
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls

arch/sparc/include/asm/unistd.h

@@ -404,8 +404,9 @@
 #define __NR_open_by_handle_at	333
 #define __NR_clock_adjtime	334
 #define __NR_syncfs		335
+#define __NR_sendmmsg		336
 
-#define NR_syscalls		336
+#define NR_syscalls		337
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,

arch/sparc/kernel/systbls_32.S

@@ -84,4 +84,4 @@ sys_call_table:
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 /*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-/*335*/	.long sys_syncfs
+/*335*/	.long sys_syncfs, sys_sendmmsg

arch/sparc/kernel/systbls_64.S

@@ -85,7 +85,7 @@ sys_call_table32:
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
 	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
-	.word sys_syncfs
+	.word sys_syncfs, compat_sys_sendmmsg
 
 #endif /* CONFIG_COMPAT */
 
@@ -162,4 +162,4 @@ sys_call_table:
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-	.word sys_syncfs
+	.word sys_syncfs, sys_sendmmsg

arch/x86/Kbuild

@@ -15,3 +15,4 @@ obj-y += vdso/
 obj-$(CONFIG_IA32_EMULATION) += ia32/
 
 obj-y += platform/
+obj-y += net/

arch/x86/Kconfig

@@ -72,6 +72,7 @@ config X86
 	select GENERIC_IRQ_SHOW
 	select IRQ_FORCED_THREADING
 	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_BPF_JIT if (X86_64 && NET)
 
 config INSTRUCTION_DECODER
 	def_bool (KPROBES || PERF_EVENTS)

arch/x86/ia32/ia32entry.S

@@ -848,4 +848,5 @@ ia32_sys_call_table:
 	.quad compat_sys_open_by_handle_at
 	.quad compat_sys_clock_adjtime
 	.quad sys_syncfs
+	.quad compat_sys_sendmmsg	/* 345 */
 ia32_syscall_end:

arch/x86/include/asm/unistd_32.h

@@ -350,10 +350,11 @@
 #define __NR_open_by_handle_at  342
 #define __NR_clock_adjtime	343
 #define __NR_syncfs             344
+#define __NR_sendmmsg		345
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 345
+#define NR_syscalls 346
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR

arch/x86/include/asm/unistd_64.h

@@ -677,6 +677,8 @@ __SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at)
 __SYSCALL(__NR_clock_adjtime, sys_clock_adjtime)
 #define __NR_syncfs                             306
 __SYSCALL(__NR_syncfs, sys_syncfs)
+#define __NR_sendmmsg				307
+__SYSCALL(__NR_sendmmsg, sys_sendmmsg)
 
 #ifndef __NO_STUBS
 #define __ARCH_WANT_OLD_READDIR

arch/x86/kernel/syscall_table_32.S

@@ -344,3 +344,4 @@ ENTRY(sys_call_table)
 	.long sys_open_by_handle_at
 	.long sys_clock_adjtime
 	.long sys_syncfs
+	.long sys_sendmmsg		/* 345 */

arch/x86/net/Makefile

@@ -0,0 +1,4 @@
+#
+# Arch-specific network modules
+#
+obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_comp.o