Merge branch 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/…

…linux/kernel/git/tip/linux-2.6-tip

* 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (131 commits)
  tracing/fastboot: improve help text
  tracing/stacktrace: improve help text
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix bootgraph.pl initcall name regexp
  tracing/fastboot: fix issues and improve output of bootgraph.pl
  tracepoints: synchronize unregister static inline
  tracepoints: tracepoint_synchronize_unregister()
  ftrace: make ftrace_test_p6nop disassembler-friendly
  markers: fix synchronize marker unregister static inline
  tracing/fastboot: add better resolution to initcall debug/tracing
  trace: add build-time check to avoid overrunning hex buffer
  ftrace: fix hex output mode of ftrace
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix printk format typo in boot tracer
  ftrace: return an error when setting a nonexistent tracer
  ftrace: make some tracers reentrant
  ring-buffer: make reentrant
  ring-buffer: move page indexes into page headers
  tracing/fastboot: only trace non-module initcalls
  ftrace: move pc counter in irqtrace
  ...

Manually fix conflicts:
 - init/main.c: initcall tracing
 - kernel/module.c: verbose level vs tracepoints
 - scripts/bootgraph.pl: fallout from cherry-picking commits.

Documentation/markers.txt

@@ -50,10 +50,12 @@ Connecting a function (probe) to a marker is done by providing a probe (function
 to call) for the specific marker through marker_probe_register() and can be
 activated by calling marker_arm(). Marker deactivation can be done by calling
 marker_disarm() as many times as marker_arm() has been called. Removing a probe
-is done through marker_probe_unregister(); it will disarm the probe and make
-sure there is no caller left using the probe when it returns. Probe removal is
-preempt-safe because preemption is disabled around the probe call. See the
-"Probe example" section below for a sample probe module.
+is done through marker_probe_unregister(); it will disarm the probe.
+marker_synchronize_unregister() must be called before the end of the module exit
+function to make sure there is no caller left using the probe. This, and the
+fact that preemption is disabled around the probe call, make sure that probe
+removal and module unload are safe. See the "Probe example" section below for a
+sample probe module.
 
 The marker mechanism supports inserting multiple instances of the same marker.
 Markers can be put in inline functions, inlined static functions, and

Documentation/tracepoints.txt

@@ -0,0 +1,101 @@
+	             Using the Linux Kernel Tracepoints
+
+			    Mathieu Desnoyers
+
+
+This document introduces Linux Kernel Tracepoints and their use. It provides
+examples of how to insert tracepoints in the kernel and connect probe functions
+to them and provides some examples of probe functions.
+
+
+* Purpose of tracepoints
+
+A tracepoint placed in code provides a hook to call a function (probe) that you
+can provide at runtime. A tracepoint can be "on" (a probe is connected to it) or
+"off" (no probe is attached). When a tracepoint is "off" it has no effect,
+except for adding a tiny time penalty (checking a condition for a branch) and
+space penalty (adding a few bytes for the function call at the end of the
+instrumented function and adds a data structure in a separate section).  When a
+tracepoint is "on", the function you provide is called each time the tracepoint
+is executed, in the execution context of the caller. When the function provided
+ends its execution, it returns to the caller (continuing from the tracepoint
+site).
+
+You can put tracepoints at important locations in the code. They are
+lightweight hooks that can pass an arbitrary number of parameters,
+which prototypes are described in a tracepoint declaration placed in a header
+file.
+
+They can be used for tracing and performance accounting.
+
+
+* Usage
+
+Two elements are required for tracepoints :
+
+- A tracepoint definition, placed in a header file.
+- The tracepoint statement, in C code.
+
+In order to use tracepoints, you should include linux/tracepoint.h.
+
+In include/trace/subsys.h :
+
+#include <linux/tracepoint.h>
+
+DEFINE_TRACE(subsys_eventname,
+	TPPTOTO(int firstarg, struct task_struct *p),
+	TPARGS(firstarg, p));
+
+In subsys/file.c (where the tracing statement must be added) :
+
+#include <trace/subsys.h>
+
+void somefct(void)
+{
+	...
+	trace_subsys_eventname(arg, task);
+	...
+}
+
+Where :
+- subsys_eventname is an identifier unique to your event
+    - subsys is the name of your subsystem.
+    - eventname is the name of the event to trace.
+- TPPTOTO(int firstarg, struct task_struct *p) is the prototype of the function
+  called by this tracepoint.
+- TPARGS(firstarg, p) are the parameters names, same as found in the prototype.
+
+Connecting a function (probe) to a tracepoint is done by providing a probe
+(function to call) for the specific tracepoint through
+register_trace_subsys_eventname().  Removing a probe is done through
+unregister_trace_subsys_eventname(); it will remove the probe sure there is no
+caller left using the probe when it returns. Probe removal is preempt-safe
+because preemption is disabled around the probe call. See the "Probe example"
+section below for a sample probe module.
+
+The tracepoint mechanism supports inserting multiple instances of the same
+tracepoint, but a single definition must be made of a given tracepoint name over
+all the kernel to make sure no type conflict will occur. Name mangling of the
+tracepoints is done using the prototypes to make sure typing is correct.
+Verification of probe type correctness is done at the registration site by the
+compiler. Tracepoints can be put in inline functions, inlined static functions,
+and unrolled loops as well as regular functions.
+
+The naming scheme "subsys_event" is suggested here as a convention intended
+to limit collisions. Tracepoint names are global to the kernel: they are
+considered as being the same whether they are in the core kernel image or in
+modules.
+
+
+* Probe / tracepoint example
+
+See the example provided in samples/tracepoints/src
+
+Compile them with your kernel.
+
+Run, as root :
+modprobe tracepoint-example (insmod order is not important)
+modprobe tracepoint-probe-example
+cat /proc/tracepoint-example (returns an expected error)
+rmmod tracepoint-example tracepoint-probe-example
+dmesg

Documentation/tracers/mmiotrace.txt

@@ -36,7 +36,7 @@ $ mount -t debugfs debugfs /debug
 $ echo mmiotrace > /debug/tracing/current_tracer
 $ cat /debug/tracing/trace_pipe > mydump.txt &
 Start X or whatever.
-$ echo "X is up" > /debug/tracing/marker
+$ echo "X is up" > /debug/tracing/trace_marker
 $ echo none > /debug/tracing/current_tracer
 Check for lost events.
 
@@ -59,9 +59,8 @@ The 'cat' process should stay running (sleeping) in the background.
 Load the driver you want to trace and use it. Mmiotrace will only catch MMIO
 accesses to areas that are ioremapped while mmiotrace is active.
 
-[Unimplemented feature:]
 During tracing you can place comments (markers) into the trace by
-$ echo "X is up" > /debug/tracing/marker
+$ echo "X is up" > /debug/tracing/trace_marker
 This makes it easier to see which part of the (huge) trace corresponds to
 which action. It is recommended to place descriptive markers about what you
 do.

arch/powerpc/platforms/cell/spufs/sputrace.c

@@ -232,6 +232,7 @@ static void __exit sputrace_exit(void)
 
 	remove_proc_entry("sputrace", NULL);
 	kfree(sputrace_log);
+	marker_synchronize_unregister();
 }
 
 module_init(sputrace_init);

arch/x86/Kconfig

@@ -26,6 +26,7 @@ config X86
 	select HAVE_KPROBES
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_KRETPROBES
+	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)

arch/x86/kernel/cpu/perfctr-watchdog.c

@@ -17,6 +17,8 @@
 #include <linux/bitops.h>
 #include <linux/smp.h>
 #include <linux/nmi.h>
+#include <linux/kprobes.h>
+
 #include <asm/apic.h>
 #include <asm/intel_arch_perfmon.h>
 
@@ -336,7 +338,8 @@ static void single_msr_unreserve(void)
 	release_perfctr_nmi(wd_ops->perfctr);
 }
 
-static void single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
+static void __kprobes
+single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
 	/* start the cycle over again */
 	write_watchdog_counter(wd->perfctr_msr, NULL, nmi_hz);
@@ -401,7 +404,7 @@ static int setup_p6_watchdog(unsigned nmi_hz)
 	return 1;
 }
 
-static void p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
+static void __kprobes p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
 	/*
 	 * P6 based Pentium M need to re-unmask
@@ -605,7 +608,7 @@ static void p4_unreserve(void)
 	release_perfctr_nmi(MSR_P4_IQ_PERFCTR0);
 }
 
-static void p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
+static void __kprobes p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
 	unsigned dummy;
 	/*
@@ -784,7 +787,7 @@ unsigned lapic_adjust_nmi_hz(unsigned hz)
 	return hz;
 }
 
-int lapic_wd_event(unsigned nmi_hz)
+int __kprobes lapic_wd_event(unsigned nmi_hz)
 {
 	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
 	u64 ctr;

arch/x86/kernel/entry_32.S

@@ -1153,20 +1153,6 @@ ENDPROC(xen_failsafe_callback)
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 ENTRY(mcount)
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	movl 0xc(%esp), %eax
-	subl $MCOUNT_INSN_SIZE, %eax
-
-.globl mcount_call
-mcount_call:
-	call ftrace_stub
-
-	popl %edx
-	popl %ecx
-	popl %eax
-
 	ret
 END(mcount)
 

arch/x86/kernel/entry_64.S

@@ -64,32 +64,6 @@
 #ifdef CONFIG_FTRACE
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(mcount)
-
-	subq $0x38, %rsp
-	movq %rax, (%rsp)
-	movq %rcx, 8(%rsp)
-	movq %rdx, 16(%rsp)
-	movq %rsi, 24(%rsp)
-	movq %rdi, 32(%rsp)
-	movq %r8, 40(%rsp)
-	movq %r9, 48(%rsp)
-
-	movq 0x38(%rsp), %rdi
-	subq $MCOUNT_INSN_SIZE, %rdi
-
-.globl mcount_call
-mcount_call:
-	call ftrace_stub
-
-	movq 48(%rsp), %r9
-	movq 40(%rsp), %r8
-	movq 32(%rsp), %rdi
-	movq 24(%rsp), %rsi
-	movq 16(%rsp), %rdx
-	movq 8(%rsp), %rcx
-	movq (%rsp), %rax
-	addq $0x38, %rsp
-
 	retq
 END(mcount)