Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...

Documentation/powerpc/dts-bindings/mtd-physmap.txt

@@ -1,18 +1,19 @@
-CFI or JEDEC memory-mapped NOR flash
+CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...)
 
 Flash chips (Memory Technology Devices) are often used for solid state
 file systems on embedded devices.
 
- - compatible : should contain the specific model of flash chip(s)
-   used, if known, followed by either "cfi-flash" or "jedec-flash"
- - reg : Address range(s) of the flash chip(s)
+ - compatible : should contain the specific model of mtd chip(s)
+   used, if known, followed by either "cfi-flash", "jedec-flash"
+   or "mtd-ram".
+ - reg : Address range(s) of the mtd chip(s)
    It's possible to (optionally) define multiple "reg" tuples so that
-   non-identical NOR chips can be described in one flash node.
- - bank-width : Width (in bytes) of the flash bank.  Equal to the
+   non-identical chips can be described in one node.
+ - bank-width : Width (in bytes) of the bank.  Equal to the
    device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip.  If
+ - device-width : (optional) Width of a single mtd chip.  If
    omitted, assumed to be equal to 'bank-width'.
- - #address-cells, #size-cells : Must be present if the flash has
+ - #address-cells, #size-cells : Must be present if the device has
    sub-nodes representing partitions (see below).  In this case
    both #address-cells and #size-cells must be equal to 1.
 
@@ -22,24 +23,24 @@ are defined:
  - vendor-id : Contains the flash chip's vendor id (1 byte).
  - device-id : Contains the flash chip's device id (1 byte).
 
-In addition to the information on the flash bank itself, the
+In addition to the information on the mtd bank itself, the
 device tree may optionally contain additional information
-describing partitions of the flash address space.  This can be
+describing partitions of the address space.  This can be
 used on platforms which have strong conventions about which
-portions of the flash are used for what purposes, but which don't
+portions of a flash are used for what purposes, but which don't
 use an on-flash partition table such as RedBoot.
 
-Each partition is represented as a sub-node of the flash device.
+Each partition is represented as a sub-node of the mtd device.
 Each node's name represents the name of the corresponding
-partition of the flash device.
+partition of the mtd device.
 
 Flash partitions
- - reg : The partition's offset and size within the flash bank.
- - label : (optional) The label / name for this flash partition.
+ - reg : The partition's offset and size within the mtd bank.
+ - label : (optional) The label / name for this partition.
    If omitted, the label is taken from the node name (excluding
    the unit address).
  - read-only : (optional) This parameter, if present, is a hint to
-   Linux that this flash partition should only be mounted
+   Linux that this partition should only be mounted
    read-only.  This is usually used for flash partitions
    containing early-boot firmware images or data which should not
    be clobbered.
@@ -78,3 +79,12 @@ Here an example with multiple "reg" tuples:
 			reg = <0 0x04000000>;
 		};
 	};
+
+An example using SRAM:
+
+	sram@2,0 {
+		compatible = "samsung,k6f1616u6a", "mtd-ram";
+		reg = <2 0 0x00200000>;
+		bank-width = <2>;
+	};
+

arch/arm/configs/nhk8815_defconfig

@@ -498,7 +498,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_ECC_SMC=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y

arch/arm/mach-nomadik/board-nhk8815.c

@@ -16,12 +16,164 @@
 #include <linux/amba/bus.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
 #include <mach/setup.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
 #include "clock.h"
 
+/* These adresses span 16MB, so use three individual pages */
+static struct resource nhk8815_nand_resources[] = {
+	{
+		.name = "nand_addr",
+		.start = NAND_IO_ADDR,
+		.end = NAND_IO_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_cmd",
+		.start = NAND_IO_CMD,
+		.end = NAND_IO_CMD + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_data",
+		.start = NAND_IO_DATA,
+		.end = NAND_IO_DATA + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static int nhk8815_nand_init(void)
+{
+	/* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
+	writel(0x0000000E, FSMC_PCR(0));
+	writel(0x000D0A00, FSMC_PMEM(0));
+	writel(0x00100A00, FSMC_PATT(0));
+
+	/* enable access to the chip select area */
+	writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
+
+	return 0;
+}
+
+/*
+ * These partitions are the same as those used in the 2.6.20 release
+ * shipped by the vendor; the first two partitions are mandated
+ * by the boot ROM, and the bootloader area is somehow oversized...
+ */
+static struct mtd_partition nhk8815_partitions[] = {
+	{
+		.name	= "X-Loader(NAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M,
+	}, {
+		.name	= "Kernel zImage(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 3 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct nomadik_nand_platform_data nhk8815_nand_data = {
+	.parts		= nhk8815_partitions,
+	.nparts		= ARRAY_SIZE(nhk8815_partitions),
+	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
+			| NAND_NO_READRDY | NAND_NO_AUTOINCR,
+	.init		= nhk8815_nand_init,
+};
+
+static struct platform_device nhk8815_nand_device = {
+	.name		= "nomadik_nand",
+	.dev		= {
+		.platform_data = &nhk8815_nand_data,
+	},
+	.resource	= nhk8815_nand_resources,
+	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
+};
+
+/* These are the partitions for the OneNand device, different from above */
+static struct mtd_partition nhk8815_onenand_partitions[] = {
+	{
+		.name	= "X-Loader(OneNAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M-SZ_256K,
+	}, {
+		.name	= "SysImage(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 4 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct flash_platform_data nhk8815_onenand_data = {
+	.parts		= nhk8815_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
+};
+
+static struct resource nhk8815_onenand_resource[] = {
+	{
+		.start		= 0x30000000,
+		.end		= 0x30000000 + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device nhk8815_onenand_device = {
+	.name		= "onenand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &nhk8815_onenand_data,
+	},
+	.resource	= nhk8815_onenand_resource,
+	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
+};
+
+static void __init nhk8815_onenand_init(void)
+{
+#ifdef CONFIG_ONENAND
+       /* Set up SMCS0 for OneNand */
+       writel(0x000030db, FSMC_BCR0);
+       writel(0x02100551, FSMC_BTR0);
+#endif
+}
+
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
 
@@ -81,6 +233,8 @@ static int __init nhk8815_eth_init(void)
 device_initcall(nhk8815_eth_init);
 
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
+	&nhk8815_nand_device,
+	&nhk8815_onenand_device,
 	&nhk8815_eth_device,
 	/* will add more devices */
 };
@@ -90,6 +244,7 @@ static void __init nhk8815_platform_init(void)
 	int i;
 
 	cpu8815_platform_init();
+	nhk8815_onenand_init();
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));
 

arch/arm/mach-nomadik/include/mach/fsmc.h

@@ -0,0 +1,29 @@
+
+/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
+
+#ifndef __ASM_ARCH_FSMC_H
+#define __ASM_ARCH_FSMC_H
+
+#include <mach/hardware.h>
+/*
+ * Register list
+ */
+
+/* bus control reg. and bus timing reg. for CS0..CS3 */
+#define FSMC_BCR(x)     (NOMADIK_FSMC_VA + (x << 3))
+#define FSMC_BTR(x)     (NOMADIK_FSMC_VA + (x << 3) + 0x04)
+
+/* PC-card and NAND:
+ * PCR = control register
+ * PMEM = memory timing
+ * PATT = attribute timing
+ * PIO = I/O timing
+ * PECCR = ECC result
+ */
+#define FSMC_PCR(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
+#define FSMC_PMEM(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
+#define FSMC_PATT(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
+#define FSMC_PIO(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
+#define FSMC_PECCR(x)   (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
+
+#endif /* __ASM_ARCH_FSMC_H */

arch/arm/mach-nomadik/include/mach/nand.h

@@ -0,0 +1,16 @@
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+struct nomadik_nand_platform_data {
+	struct mtd_partition *parts;
+	int nparts;
+	int options;
+	int (*init) (void);
+	int (*exit) (void);
+};
+
+#define NAND_IO_DATA	0x40000000
+#define NAND_IO_CMD	0x40800000
+#define NAND_IO_ADDR	0x41000000
+
+#endif				/* __ASM_ARCH_NAND_H */

arch/arm/mach-omap2/board-apollon.c

@@ -87,7 +87,7 @@ static struct mtd_partition apollon_partitions[] = {
 	},
 };
 
-static struct flash_platform_data apollon_flash_data = {
+static struct onenand_platform_data apollon_flash_data = {
 	.parts		= apollon_partitions,
 	.nr_parts	= ARRAY_SIZE(apollon_partitions),
 };
@@ -99,7 +99,7 @@ static struct resource apollon_flash_resource[] = {
 };
 
 static struct platform_device apollon_onenand_device = {
-	.name		= "onenand",
+	.name		= "onenand-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &apollon_flash_data,