fbdev: add new framebuffer driver for Fujitsu MB862xx GDCs

Add a framebuffer driver for the Fujitsu Carmine/Coral-P(A)/Lime graphics
controllers.  Lime GDC support is known to work on PPC440EPx based lwmon5
and MPC8544E based socrates embedded boards, both equipped with Lime GDC.
Carmine/Coral-P PCI GDC support is known to work on PPC440EPx based
Sequoia board and also on x86 platform.

Signed-off-by: Anatolij Gustschin <[email protected]>
Cc: Dmitry Baryshkov <[email protected]>
Cc: Anton Vorontsov <[email protected]>
Cc: Matteo Fortini <[email protected]>
Cc: Krzysztof Helt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

drivers/video/Kconfig

@@ -2083,6 +2083,38 @@ config FB_METRONOME
 	  controller. The pre-release name for this device was 8track
 	  and could also have been called by some vendors as PVI-nnnn.
 
+config FB_MB862XX
+	tristate "Fujitsu MB862xx GDC support"
+	depends on FB
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+config FB_MB862XX_PCI_GDC
+	bool "Carmine/Coral-P(A) GDC"
+	depends on PCI && FB_MB862XX
+	---help---
+	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+	  PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+	bool "Lime GDC"
+	depends on FB_MB862XX
+	depends on OF && !FB_MB862XX_PCI_GDC
+	select FB_FOREIGN_ENDIAN
+	select FB_LITTLE_ENDIAN
+	---help---
+	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+config FB_PRE_INIT_FB
+	bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+	depends on FB_MB862XX_LIME
+	---help---
+	  Select this option if display contents should be inherited as set by
+	  the bootloader.
+
 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"

drivers/video/Makefile

@@ -122,6 +122,7 @@ obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
+obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_UVESA)            += uvesafb.o

drivers/video/mb862xx/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the MB862xx framebuffer driver
+#
+
+obj-$(CONFIG_FB_MB862XX)	:= mb862xxfb.o

drivers/video/mb862xx/mb862xx_reg.h

@@ -0,0 +1,138 @@
+/*
+ * Fujitsu MB862xx Graphics Controller Registers/Bits
+ */
+
+#ifndef _MB862XX_REG_H
+#define _MB862XX_REG_H
+
+#ifdef MB862XX_MMIO_BOTTOM
+#define MB862XX_MMIO_BASE	0x03fc0000
+#else
+#define MB862XX_MMIO_BASE	0x01fc0000
+#endif
+#define MB862XX_I2C_BASE	0x0000c000
+#define MB862XX_DISP_BASE	0x00010000
+#define MB862XX_CAP_BASE	0x00018000
+#define MB862XX_DRAW_BASE	0x00030000
+#define MB862XX_GEO_BASE	0x00038000
+#define MB862XX_PIO_BASE	0x00038000
+#define MB862XX_MMIO_SIZE	0x40000
+
+/* Host interface/pio registers */
+#define GC_IST			0x00000020
+#define GC_IMASK		0x00000024
+#define GC_SRST			0x0000002c
+#define GC_CCF			0x00000038
+#define GC_CID			0x000000f0
+#define GC_REVISION		0x00000084
+
+#define GC_CCF_CGE_100		0x00000000
+#define GC_CCF_CGE_133		0x00040000
+#define GC_CCF_CGE_166		0x00080000
+#define GC_CCF_COT_100		0x00000000
+#define GC_CCF_COT_133		0x00010000
+#define GC_CID_CNAME_MSK	0x0000ff00
+#define GC_CID_VERSION_MSK	0x000000ff
+
+/* define enabled interrupts hereby */
+#define GC_INT_EN		0x00000000
+
+/* Memory interface mode register */
+#define GC_MMR			0x0000fffc
+
+/* Display Controller registers */
+#define GC_DCM0			0x00000000
+#define GC_HTP			0x00000004
+#define GC_HDB_HDP		0x00000008
+#define GC_VSW_HSW_HSP		0x0000000c
+#define GC_VTR			0x00000010
+#define GC_VDP_VSP		0x00000014
+#define GC_WY_WX		0x00000018
+#define GC_WH_WW		0x0000001c
+#define GC_L0M			0x00000020
+#define GC_L0OA0		0x00000024
+#define GC_L0DA0		0x00000028
+#define GC_L0DY_L0DX		0x0000002c
+#define GC_DCM1			0x00000100
+#define GC_L0EM			0x00000110
+#define GC_L0WY_L0WX		0x00000114
+#define GC_L0WH_L0WW		0x00000118
+#define GC_DCM2			0x00000104
+#define GC_DCM3			0x00000108
+#define GC_CPM_CUTC		0x000000a0
+#define GC_CUOA0		0x000000a4
+#define GC_CUY0_CUX0		0x000000a8
+#define GC_CUOA1		0x000000ac
+#define GC_CUY1_CUX1		0x000000b0
+#define GC_L0PAL0		0x00000400
+
+#define GC_CPM_CEN0		0x00100000
+#define GC_CPM_CEN1		0x00200000
+
+#define GC_DCM01_ESY		0x00000004
+#define GC_DCM01_SC		0x00003f00
+#define GC_DCM01_RESV		0x00004000
+#define GC_DCM01_CKS		0x00008000
+#define GC_DCM01_L0E		0x00010000
+#define GC_DCM01_DEN		0x80000000
+#define GC_L0M_L0C_8		0x00000000
+#define GC_L0M_L0C_16		0x80000000
+#define GC_L0EM_L0EC_24		0x40000000
+#define GC_L0M_L0W_UNIT		64
+
+#define GC_DISP_REFCLK_400	400
+
+/* Carmine specific */
+#define MB86297_DRAW_BASE		0x00020000
+#define MB86297_DISP0_BASE		0x00100000
+#define MB86297_DISP1_BASE		0x00140000
+#define MB86297_WRBACK_BASE		0x00180000
+#define MB86297_CAP0_BASE		0x00200000
+#define MB86297_CAP1_BASE		0x00280000
+#define MB86297_DRAMCTRL_BASE		0x00300000
+#define MB86297_CTRL_BASE		0x00400000
+#define MB86297_I2C_BASE		0x00500000
+
+#define GC_CTRL_STATUS			0x00000000
+#define GC_CTRL_INT_MASK		0x00000004
+#define GC_CTRL_CLK_ENABLE		0x0000000c
+#define GC_CTRL_SOFT_RST		0x00000010
+
+#define GC_CTRL_CLK_EN_DRAM		0x00000001
+#define GC_CTRL_CLK_EN_2D3D		0x00000002
+#define GC_CTRL_CLK_EN_DISP0		0x00000020
+#define GC_CTRL_CLK_EN_DISP1		0x00000040
+
+#define GC_2D3D_REV			0x000004b4
+#define GC_RE_REVISION			0x24240200
+
+/* define enabled interrupts hereby */
+#define GC_CARMINE_INT_EN		0x00000004
+
+/* DRAM controller */
+#define GC_DCTL_MODE_ADD		0x00000000
+#define GC_DCTL_SETTIME1_EMODE		0x00000004
+#define GC_DCTL_REFRESH_SETTIME2	0x00000008
+#define GC_DCTL_RSV0_STATES		0x0000000C
+#define GC_DCTL_RSV2_RSV1		0x00000010
+#define GC_DCTL_DDRIF2_DDRIF1		0x00000014
+#define GC_DCTL_IOCONT1_IOCONT0		0x00000024
+
+#define GC_DCTL_STATES_MSK		0x0000000f
+#define GC_DCTL_INIT_WAIT_CNT		3000
+#define GC_DCTL_INIT_WAIT_INTERVAL	1
+
+/* DRAM ctrl values for Carmine PCI Eval. board */
+#define GC_EVB_DCTL_MODE_ADD		0x012105c3
+#define GC_EVB_DCTL_MODE_ADD_AFT_RST	0x002105c3
+#define GC_EVB_DCTL_SETTIME1_EMODE	0x47498000
+#define GC_EVB_DCTL_REFRESH_SETTIME2	0x00422a22
+#define GC_EVB_DCTL_RSV0_STATES		0x00200003
+#define GC_EVB_DCTL_RSV0_STATES_AFT_RST	0x00200002
+#define GC_EVB_DCTL_RSV2_RSV1		0x0000000f
+#define GC_EVB_DCTL_DDRIF2_DDRIF1	0x00556646
+#define GC_EVB_DCTL_IOCONT1_IOCONT0	0x05550555
+
+#define GC_DISP_REFCLK_533		533
+
+#endif