Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upst…

…ream-linus

Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove <asm/kspd.h>
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...

arch/mips/Kbuild.platforms

@@ -30,7 +30,6 @@ platforms += sibyte
 platforms += sni
 platforms += txx9
 platforms += vr41xx
-platforms += wrppmc
 
 # include the platform specific files
 include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))

arch/mips/Kconfig

@@ -1,6 +1,7 @@
 config MIPS
 	bool
 	default y
+	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
 	select HAVE_OPROFILE
@@ -27,6 +28,7 @@ config MIPS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select IRQ_FORCED_THREADING
@@ -46,9 +48,6 @@ config MIPS
 
 menu "Machine selection"
 
-config ZONE_DMA
-	bool
-
 choice
 	prompt "System type"
 	default SGI_IP22
@@ -124,11 +123,14 @@ config BCM47XX
 
 config BCM63XX
 	bool "Broadcom BCM63XX based boards"
+	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
+	select NR_CPUS_DEFAULT_2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -341,7 +343,6 @@ config MIPS_SEAD3
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select IRQ_GIC
-	select MIPS_CPU_SCACHE
 	select MIPS_MSC
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -420,7 +421,6 @@ config POWERTV
 	select CSRC_POWERTV
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -713,46 +713,8 @@ config MIKROTIK_RB532
 	  Support the Mikrotik(tm) RouterBoard 532 series,
 	  based on the IDT RC32434 SoC.
 
-config WR_PPMC
-	bool "Wind River PPMC board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_CPU
-	select BOOT_ELF32
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select PCI_GT64XXX_PCI0
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_CPU_NEVADA
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	help
-	  This enables support for the Wind River MIPS32 4KC PPMC evaluation
-	  board, which is based on GT64120 bridge chip.
-
-config CAVIUM_OCTEON_SIMULATOR
-	bool "Cavium Networks Octeon Simulator"
-	select CEVT_R4K
-	select 64BIT_PHYS_ADDR
-	select DMA_COHERENT
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HOTPLUG_CPU
-	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select HOLES_IN_ZONE
-	help
-	  The Octeon simulator is software performance model of the Cavium
-	  Octeon Processor. It supports simulating Octeon processors on x86
-	  hardware.
-
-config CAVIUM_OCTEON_REFERENCE_BOARD
-	bool "Cavium Networks Octeon reference board"
+config CAVIUM_OCTEON_SOC
+	bool "Cavium Networks Octeon SoC based boards"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT
@@ -806,6 +768,8 @@ config NLM_XLR_BOARD
 	select SYS_HAS_EARLY_PRINTK
 	select USB_ARCH_HAS_OHCI if USB_SUPPORT
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	help
 	  Support for systems based on Netlogic XLR and XLS processors.
 	  Say Y here if you have a XLR or XLS based board.
@@ -832,6 +796,8 @@ config NLM_XLP_BOARD
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
 	select USE_OF
+	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	help
 	  This board is based on Netlogic XLP Processor.
 	  Say Y here if you have a XLP based board.
@@ -1031,7 +997,6 @@ config CPU_BIG_ENDIAN
 config CPU_LITTLE_ENDIAN
 	bool "Little endian"
 	depends on SYS_SUPPORTS_LITTLE_ENDIAN
-	help
 
 endchoice
 
@@ -1964,7 +1929,7 @@ config MIPS_MT_FPAFF
 
 config MIPS_VPE_LOADER
 	bool "VPE loader support."
-	depends on SYS_SUPPORTS_MULTITHREADING
+	depends on SYS_SUPPORTS_MULTITHREADING && MODULES
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
@@ -2382,6 +2347,19 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
+config CC_STACKPROTECTOR
+	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+	help
+	  This option turns on the -fstack-protector GCC feature. This
+	  feature puts, at the beginning of functions, a canary value on
+	  the stack just before the return address, and validates
+	  the value just before actually returning.  Stack based buffer
+	  overflows (that need to overwrite this return address) now also
+	  overwrite the canary, which gets detected and the attack is then
+	  neutralized via a kernel panic.
+
+	  This feature requires gcc version 4.2 or above.
+
 config USE_OF
 	bool
 	select OF
@@ -2413,7 +2391,6 @@ config PCI
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select GENERIC_PCI_IOMAP
 	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
@@ -2479,6 +2456,9 @@ config I8253
 	select CLKEVT_I8253
 	select MIPS_EXTERNAL_TIMER
 
+config ZONE_DMA
+	bool
+
 config ZONE_DMA32
 	bool
 

arch/mips/Makefile

@@ -227,6 +227,10 @@ KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
 LDFLAGS			+= -m $(ld-emul)
 
+ifdef CONFIG_CC_STACKPROTECTOR
+  KBUILD_CFLAGS += -fstack-protector
+endif
+
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
 	egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \

arch/mips/ath79/mach-ap136.c

@@ -132,7 +132,7 @@ static void __init ap136_pci_init(u8 *eeprom)
 	ath79_register_pci();
 }
 #else
-static inline void ap136_pci_init(void) {}
+static inline void ap136_pci_init(u8 *eeprom) {}
 #endif /* CONFIG_PCI */
 
 static void __init ap136_setup(void)

arch/mips/bcm63xx/Kconfig

@@ -1,21 +1,20 @@
 menu "CPU support"
 	depends on BCM63XX
 
+config BCM63XX_CPU_3368
+	bool "support 3368 CPU"
+	select HW_HAS_PCI
+
 config BCM63XX_CPU_6328
 	bool "support 6328 CPU"
 	select HW_HAS_PCI
 
 config BCM63XX_CPU_6338
 	bool "support 6338 CPU"
 	select HW_HAS_PCI
-	select USB_ARCH_HAS_OHCI
-	select USB_OHCI_BIG_ENDIAN_DESC
-	select USB_OHCI_BIG_ENDIAN_MMIO
 
 config BCM63XX_CPU_6345
 	bool "support 6345 CPU"
-	select USB_OHCI_BIG_ENDIAN_DESC
-	select USB_OHCI_BIG_ENDIAN_MMIO
 
 config BCM63XX_CPU_6348
 	bool "support 6348 CPU"

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -28,10 +28,46 @@
 #include <bcm63xx_dev_usb_usbd.h>
 #include <board_bcm963xx.h>
 
+#include <uapi/linux/bcm933xx_hcs.h>
+
 #define PFX	"board_bcm963xx: "
 
+#define HCS_OFFSET_128K			0x20000
+
 static struct board_info board;
 
+/*
+ * known 3368 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_3368
+static struct board_info __initdata board_cvg834g = {
+	.name				= "CVG834G_E15R3921",
+	.expected_cpu_id		= 0x3368,
+
+	.has_uart0			= 1,
+	.has_uart1			= 1,
+
+	.has_enet0			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.leds = {
+		{
+			.name		= "CVG834G:green:power",
+			.gpio		= 37,
+			.default_trigger= "default-on",
+		},
+	},
+
+	.ephy_reset_gpio		= 36,
+	.ephy_reset_gpio_flags		= GPIOF_INIT_HIGH,
+};
+#endif
+
 /*
  * known 6328 boards
  */
@@ -639,6 +675,9 @@ static struct board_info __initdata board_DWVS0 = {
  * all boards
  */
 static const struct board_info __initconst *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_3368
+	&board_cvg834g,
+#endif
 #ifdef CONFIG_BCM63XX_CPU_6328
 	&board_96328avng,
 #endif
@@ -722,8 +761,9 @@ void __init board_prom_init(void)
 	unsigned int i;
 	u8 *boot_addr, *cfe;
 	char cfe_version[32];
-	char *board_name;
+	char *board_name = NULL;
 	u32 val;
+	struct bcm_hcs *hcs;
 
 	/* read base address of boot chip select (0)
 	 * 6328/6362 do not have MPI but boot from a fixed address
@@ -747,7 +787,12 @@ void __init board_prom_init(void)
 
 	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
 
-	board_name = bcm63xx_nvram_get_name();
+	if (BCMCPU_IS_3368()) {
+		hcs = (struct bcm_hcs *)boot_addr;
+		board_name = hcs->filename;
+	} else {
+		board_name = bcm63xx_nvram_get_name();
+	}
 	/* find board by name */
 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
@@ -877,5 +922,9 @@ int __init board_register_devices(void)
 
 	platform_device_register(&bcm63xx_gpio_leds);
 
+	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+		gpio_request_one(board.ephy_reset_gpio,
+				board.ephy_reset_gpio_flags, "ephy-reset");
+
 	return 0;
 }

arch/mips/bcm63xx/clk.c

@@ -84,7 +84,7 @@ static void enetx_set(struct clk *clk, int enable)
 	else
 		clk_disable_unlocked(&clk_enet_misc);
 
-	if (BCMCPU_IS_6358()) {
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
 		u32 mask;
 
 		if (clk->id == 0)
@@ -110,9 +110,8 @@ static struct clk clk_enet1 = {
  */
 static void ephy_set(struct clk *clk, int enable)
 {
-	if (!BCMCPU_IS_6358())
-		return;
-	bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358())
+		bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
 }
 
 
@@ -155,9 +154,10 @@ static struct clk clk_enetsw = {
  */
 static void pcm_set(struct clk *clk, int enable)
 {
-	if (!BCMCPU_IS_6358())
-		return;
-	bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
+	if (BCMCPU_IS_3368())
+		bcm_hwclock_set(CKCTL_3368_PCM_EN, enable);
+	if (BCMCPU_IS_6358())
+		bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
 }
 
 static struct clk clk_pcm = {
@@ -211,7 +211,7 @@ static void spi_set(struct clk *clk, int enable)
 		mask = CKCTL_6338_SPI_EN;
 	else if (BCMCPU_IS_6348())
 		mask = CKCTL_6348_SPI_EN;
-	else if (BCMCPU_IS_6358())
+	else if (BCMCPU_IS_3368() || BCMCPU_IS_6358())
 		mask = CKCTL_6358_SPI_EN;
 	else if (BCMCPU_IS_6362())
 		mask = CKCTL_6362_SPI_EN;
@@ -318,6 +318,18 @@ unsigned long clk_get_rate(struct clk *clk)
 
 EXPORT_SYMBOL(clk_get_rate);
 
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
+
 struct clk *clk_get(struct device *dev, const char *id)
 {
 	if (!strcmp(id, "enet0"))
@@ -338,7 +350,7 @@ struct clk *clk_get(struct device *dev, const char *id)
 		return &clk_xtm;
 	if (!strcmp(id, "periph"))
 		return &clk_periph;
-	if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
+	if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
 		return &clk_pcm;
 	if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
 		return &clk_ipsec;