ALP D-installer update (#115)

* D-installer chapter updated

concepts/alp-deployment.xml

@@ -27,18 +27,18 @@
     <section xml:id="alp-deployment-dinstaller">
       <title>&dinstaller;</title>
       <para>
-        While &dinstaller; handles both bare-metal and virtualized deployments,
-        it is a preferred method for bare-metal deployments. &productnameshort;
-        deployment using &dinstaller; is similar to a traditional operating
-        system setup. After booting the &dinstaller; image, the installer uses
-        a graphical user-friendly interface to walk you through the system
-        configuration and deployment.
+        While &dinstaller; handles both bare-metal and virtualized / cloud
+        deployments, it is a preferred method for bare-metal deployments.
+        &productnameshort; deployment using &dinstaller; is similar to a
+        traditional operating system setup. After booting the &dinstaller;
+        image, the installer uses a graphical user-friendly interface to walk
+        you through the system configuration and deployment.
       </para>
     </section>
     <section xml:id="alp-deployment-raw-image">
       <title>Raw disk image</title>
       <para>
-        This method handles both bare-metal and virtualized deployment as well.
+        This method handles both bare-metal and virtualized / cloud deployment.
         It is different from the &dinstaller; deployment in that you do not
         boot an installer but the actual &productnameshort; image itself. On
         first boot, you can configure basic system options using an

tasks/deploy-alp-dinstaller.xml

@@ -31,7 +31,7 @@
           Download the &productnameshort; &dinstaller; image from
           &alp-dinstaller-dld-site;. For example:
         </para>
-<screen>&prompt.user;curl -LO &alp-dinstaller-dld-site;d-installer-live.x86_64-0.6-ALP-Build3.6.iso</screen>
+<screen>&prompt.user;curl -LO &alp-dinstaller-dld-site;/d-installer-live.x86_64-0.8.3-ALP-Build5.1.iso</screen>
       </step>
       <step>
         <para>
@@ -44,47 +44,69 @@
         <para>
           After booting the &dinstaller; image, select
           <guimenu>d-installer-live</guimenu> from the boot menu. A graphical
-          installer will appear with configuration options affecting the
-          &productnameshort; deployment.
+          installer appears asking you to select the product to deploy. Select
+          <guimenu>&productname;</guimenu> and confirm with
+          <guimenu>Select</guimenu>.
         </para>
         <figure>
-          <title>The &dinstaller; GUI</title>
+          <title>Select ALP product</title>
           <mediaobject>
             <imageobject role="fo">
-              <imagedata fileref="alp-dinstaller-welcome.png" width="75%"/>
+              <imagedata fileref="alp-dinstaller-select-product.png" width="90%"/>
             </imageobject>
             <imageobject role="html">
-              <imagedata fileref="alp-dinstaller-welcome.png" width="75%"/>
+              <imagedata fileref="alp-dinstaller-select-product.png" width="90%"/>
             </imageobject>
-            <textobject role="description"><phrase>The &dinstaller; GUI</phrase>
+            <textobject role="description"><phrase>Select ALP product</phrase>
             </textobject>
           </mediaobject>
         </figure>
       </step>
       <step>
         <para>
-          Click the default language and select your preferred language from
-          the drop-down list.
+          After selecting the product, a screen with the main installation menu
+          is displayed.
         </para>
+        <figure>
+          <title>&dinstaller; main menu</title>
+          <mediaobject>
+            <imageobject role="fo">
+              <imagedata os="alp-micro" fileref="alp-micro-dinstaller-welcome.png" width="90%"/>
+              <imagedata os="alp-bedrock" fileref="alp-bedrock-dinstaller-welcome.png" width="90%"/>
+            </imageobject>
+            <imageobject role="html">
+              <imagedata os="alp-micro" fileref="alp-micro-dinstaller-welcome.png" width="90%"/>
+              <imagedata os="alp-bedrock" fileref="alp-bedrock-dinstaller-welcome.png" width="90%"/>
+            </imageobject>
+            <textobject role="description"><phrase>&dinstaller; main menu</phrase>
+            </textobject>
+          </mediaobject>
+        </figure>
       </step>
       <step>
         <para>
-          Configure network settings. Click the default wired connection and
-          configure the network according to your needs. You can, for example,
-          change the networking mode to <guimenu>Manual</guimenu>, add IP
-          addresses and related prefixes or netmasks, gateway, and DNS servers.
+          Click <guimenu>Localization</guimenu> and select your preferred
+          language from the drop-down list.
+        </para>
+      </step>
+      <step>
+        <para>
+          Configure network settings by selecting <guimenu>Edit</guimenu> from
+          the menu on the right side of the default wired connection. You can,
+          for example, change the networking mode to <guimenu>Manual</guimenu>,
+          add IP addresses and related prefixes or netmasks, or add gateway and
+          DNS servers.
         </para>
         <figure>
-          <title>Configuring a wired connection</title>
+          <title>Configuring the network</title>
           <mediaobject>
             <imageobject role="fo">
               <imagedata fileref="alp-dinstaller-network-wired.png" width="50%"/>
             </imageobject>
             <imageobject role="html">
               <imagedata fileref="alp-dinstaller-network-wired.png" width="50%"/>
             </imageobject>
-            <textobject role="description"><phrase>Configuring a wired
-            connection</phrase>
+            <textobject role="description"><phrase>Configuring the network</phrase>
             </textobject>
           </mediaobject>
         </figure>
@@ -95,11 +117,10 @@
       </step>
       <step>
         <para>
-          Configure storage by clicking <guimenu>Edit storage
-          settings</guimenu>.
+          Configure <guimenu>Storage</guimenu>.
         </para>
         <figure>
-          <title>Configuring &productnameshort; storage</title>
+          <title>Configuring storage</title>
           <mediaobject>
             <imageobject role="fo">
               <imagedata fileref="alp-dinstaller-storage.png" width="75%"/>
@@ -112,24 +133,44 @@
           </mediaobject>
         </figure>
         <para>
-          You can select a device for &productnameshort; installation or
-          specify advanced storage settings, for example, whether to use LVM or
-          encrypted devices.
+          Select the disk device where &productnameshort; should be installed
+          or click <menuchoice><guimenu>advanced options
+          menu</guimenu><guimenu>Configure iSCSI</guimenu></menuchoice> to
+          manage iSCSI targets for the installation.
         </para>
         <figure>
-          <title>Advanced storage settings</title>
+          <title>Discover iSCSI targets</title>
           <mediaobject>
             <imageobject role="fo">
-              <imagedata fileref="alp-dinstaller-storage-advanced.png" width="50%"/>
+              <imagedata fileref="alp-dinstaller-iscsi-targets.png" width="75%"/>
             </imageobject>
             <imageobject role="html">
-              <imagedata fileref="alp-dinstaller-storage-advanced.png" width="50%"/>
+              <imagedata fileref="alp-dinstaller-iscsi-targets.png" width="75%"/>
             </imageobject>
-            <textobject role="description"><phrase>Advanced
-            storage settings</phrase>
+            <textobject role="description"><phrase>Discover iSCSI targets</phrase>
             </textobject>
           </mediaobject>
         </figure>
+        <para>
+          Click <guimenu>Discover</guimenu> to add new iSCSI targets.
+        </para>
+        <figure>
+          <title>Adding a new iSCSI target</title>
+          <mediaobject>
+            <imageobject role="fo">
+              <imagedata fileref="alp-dinstaller-add-iscsi-target.png" width="50%"/>
+            </imageobject>
+            <imageobject role="html">
+              <imagedata fileref="alp-dinstaller-add-iscsi-target.png" width="50%"/>
+            </imageobject>
+            <textobject role="description"><phrase>Adding a new iSCSI target</phrase>
+            </textobject>
+          </mediaobject>
+        </figure>
+        <para>
+          Click <guimenu>Settings</guimenu> from the <guimenu>Storage</guimenu>
+          screen to enable LVM or enter a password for disk encryption.
+        </para>
         <tip>
           <para>
             If you enable disk encryption, you will be asked for a decryption
@@ -147,7 +188,7 @@
         <para>
           In the <guimenu>Users</guimenu> section, specify a &rootuser;
           password, upload a <guimenu>Root SSH public key</guimenu>, or create
-          an additional user account and enable auto-login for it.
+          an additional user account and optionally enable auto-login for it.
         </para>
         <figure>
           <title>Creating a user account</title>
@@ -166,22 +207,8 @@
       <step>
         <para>
           To begin the installation, click <guimenu>Install</guimenu> and
-          confirm with <guimenu>Continue</guimenu>. The installation process
-          will start.
+          confirm with <guimenu>Continue</guimenu>.
         </para>
-        <figure>
-          <title>&productnameshort; installation in progress</title>
-          <mediaobject>
-            <imageobject role="fo">
-              <imagedata fileref="alp-dinstaller-installation.png" width="50%"/>
-            </imageobject>
-            <imageobject role="html">
-              <imagedata fileref="alp-dinstaller-installation.png" width="50%"/>
-            </imageobject>
-            <textobject role="description"><phrase>&productnameshort; installation in progress</phrase>
-            </textobject>
-          </mediaobject>
-        </figure>
         <para>
           After the installation is finished, click <guimenu>Reboot</guimenu>
           and select <guimenu>ALP</guimenu> from the boot menu after reboot.