Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series has a huge amount of churn because it pulls in Mauro's doc
  update changing all our txt files to rst ones.

  Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
  zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
  some other minor updates.

  The major core change is Hannes moving functions out of the aacraid
  driver and into the core"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
  scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
  scsi: ufs: Do not rely on prefetched data
  scsi: dc395x: remove dc395x_bios_param
  scsi: libiscsi: Fix error count for active session
  scsi: hpsa: correct race condition in offload enabled
  scsi: message: fusion: Replace zero-length array with flexible-array member
  scsi: qedi: Add PCI shutdown handler support
  scsi: qedi: Add MFW error recovery process
  scsi: ufs: Enable block layer runtime PM for well-known logical units
  scsi: ufs-qcom: Override devfreq parameters
  scsi: ufshcd: Let vendor override devfreq parameters
  scsi: ufshcd: Update the set frequency to devfreq
  scsi: ufs: Resume ufs host before accessing ufs device
  scsi: ufs-mediatek: customize the delay for enabling host
  scsi: ufs: make HCE polling more compact to improve initialization latency
  scsi: ufs: allow custom delay prior to host enabling
  scsi: ufs-mediatek: use common delay function
  scsi: ufs: introduce common and flexible delay function
  scsi: ufs: use an enum for host capabilities
  scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
  ...

Documentation/driver-api/libata.rst

@@ -401,7 +401,7 @@ Error handling
 ==============
 
 This chapter describes how errors are handled under libata. Readers are
-advised to read SCSI EH (Documentation/scsi/scsi_eh.txt) and ATA
+advised to read SCSI EH (Documentation/scsi/scsi_eh.rst) and ATA
 exceptions doc first.
 
 Origins of commands

Documentation/index.rst

@@ -131,6 +131,7 @@ needed).
    bpf/index
    usb/index
    PCI/index
+   scsi/index
    misc-devices/index
    scheduler/index
 

Documentation/scsi/53c700.txt → Documentation/scsi/53c700.rst

@@ -1,3 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+The 53c700 Driver Notes
+=======================
+
 General Description
 ===================
 
@@ -16,9 +22,9 @@ fill in to get the driver working.
 Compile Time Flags
 ==================
 
-A compile time flag is:
+A compile time flag is::
 
-CONFIG_53C700_LE_ON_BE
+	CONFIG_53C700_LE_ON_BE
 
 define if the chipset must be supported in little endian mode on a big
 endian architecture (used for the 700 on parisc).
@@ -51,9 +57,11 @@ consistent with the best operation of the chip (although some choose
 to drive it off the CPU or bus clock rather than going to the expense
 of an extra clock chip).  The best operation clock speeds are:
 
-53c700 - 25MHz
-53c700-66 - 50MHz
-53c710 - 40Mhz
+=========  =====
+53c700     25MHz
+53c700-66  50MHz
+53c710     40Mhz
+=========  =====
 
 Writing Your Glue Driver
 ========================
@@ -69,7 +77,7 @@ parameters that matter to you (see below), plumb the NCR_700_intr
 routine into the interrupt line and call NCR_700_detect with the host
 template and the new parameters as arguments.  You should also call
 the relevant request_*_region function and place the register base
-address into the `base' pointer of the host parameters.
+address into the 'base' pointer of the host parameters.
 
 In the release routine, you must free the NCR_700_Host_Parameters that
 you allocated, call the corresponding release_*_region and free the
@@ -78,7 +86,7 @@ interrupt.
 Handling Interrupts
 -------------------
 
-In general, you should just plumb the card's interrupt line in with 
+In general, you should just plumb the card's interrupt line in with
 
 request_irq(irq, NCR_700_intr, <irq flags>, <driver name>, host);
 
@@ -95,41 +103,32 @@ Settable NCR_700_Host_Parameters
 The following are a list of the user settable parameters:
 
 clock: (MANDATORY)
-
-Set to the clock speed of the chip in MHz.
+  Set to the clock speed of the chip in MHz.
 
 base: (MANDATORY)
-
-set to the base of the io or mem region for the register set. On 64
-bit architectures this is only 32 bits wide, so the registers must be
-mapped into the low 32 bits of memory.
+  Set to the base of the io or mem region for the register set. On 64
+  bit architectures this is only 32 bits wide, so the registers must be
+  mapped into the low 32 bits of memory.
 
 pci_dev: (OPTIONAL)
-
-set to the PCI board device.  Leave NULL for a non-pci board.  This is
-used for the pci_alloc_consistent() and pci_map_*() functions.
+  Set to the PCI board device.  Leave NULL for a non-pci board.  This is
+  used for the pci_alloc_consistent() and pci_map_*() functions.
 
 dmode_extra: (OPTIONAL, 53c710 only)
-
-extra flags for the DMODE register.  These are used to control bus
-output pins on the 710.  The settings should be a combination of
-DMODE_FC1 and DMODE_FC2.  What these pins actually do is entirely up
-to the board designer.  Usually it is safe to ignore this setting.
+  Extra flags for the DMODE register.  These are used to control bus
+  output pins on the 710.  The settings should be a combination of
+  DMODE_FC1 and DMODE_FC2.  What these pins actually do is entirely up
+  to the board designer.  Usually it is safe to ignore this setting.
 
 differential: (OPTIONAL)
-
-set to 1 if the chip drives a differential bus.
+  Set to 1 if the chip drives a differential bus.
 
 force_le_on_be: (OPTIONAL, only if CONFIG_53C700_LE_ON_BE is set)
-
-set to 1 if the chip is operating in little endian mode on a big
-endian architecture.
+  Set to 1 if the chip is operating in little endian mode on a big
+  endian architecture.
 
 chip710: (OPTIONAL)
-
-set to 1 if the chip is a 53c710.
+  Set to 1 if the chip is a 53c710.
 
 burst_disable: (OPTIONAL, 53c710 only)
-
-disable 8 byte bursting for DMA transfers.
-
+  Disable 8 byte bursting for DMA transfers.