pico-ducky

Make a cheap but powerful USB Rubber Ducky with a Raspberry Pi Pico

Install

Install and have your USB Rubber Ducky working in less than 5 minutes.

1. Download CircuitPython for the Raspberry Pi Pico.

2. Plug the device into a USB port. It will show up as a removable media device named RPI-RP2.

3. Copy the downloaded .uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.

4. Download adafruit-circuitpython-bundle-6.x-mpy-YYYYMMDD.zip here and extract it outside the device.

5. Navigate to lib in the recently extracted folder and copy adafruit_hid to the lib folder in your Raspberry Pi Pico.

6. Click here, press CTRL + S and save the file as code.py in the root of the Raspberry Pi Pico, overwriting the previous file.

7. Find a script here or create your own one using Ducky Script and save it as payload.dd in the Pico.

8. Be careful, if your device isn't in setup mode, the device will reboot and after half a second, the script will run.

Setup mode

To edit the payload, enter setup mode by connecting the pin 1 (GP0) to pin 3 (GND), this will stop the pico-ducky from injecting the payload in your own machine. The easiest way to so is by using a jumper wire between those pins as seen bellow.

Useful links and resources

Docs

CircuitPython

CircuitPython HID

Ducky Script

Video tutorials

pico-ducky tutorial by NetworkChuck

USB Rubber Ducky playlist by Hak5

CircuitPython tutorial on the Raspberry Pi Pico by DroneBot Workshop