This plugin allows you to configure every aspect of email notifications. You can customize when an email is sent, who should receive it, and what the email says.
This plugin extends the Mailer plugin's functionality by giving you more control. It provides customization of three areas:
- Triggers
-
Select the conditions that should cause an email notification to be sent.
- Content
-
Specify the content of each triggered email’s subject and body.
- Recipients
-
Specify who should receive an email when it is triggered.
If you need help, please post on the Jenkins users mailing list or Stack Overflow.
Report bugs and requests for enhancement in the Jenkins issue tracker (no support tickets, please).
Use the email-ext-plugin component in the JENKINS project.
Before using this plugin from a project, you must first configure some system-wide settings. Go to the Jenkins system-wide configuration page (Manage Jenkins, Configure System).
The configuration for this plugin can be found in the section entitled Extended E-mail Notification. This configuration should match the settings for your SMTP mail server. This section mirrors that of the Mailer plugin in the E-mail Notification section; however, there are a few additions. The fields labeled Default Subject and Default Content allow you to configure the subject and content on a system-wide level. The field labeled Default Recipients can be used to set a default list of email addresses for all projects using this plugin (and can be overridden at the project level); this can be used to greatly simplify the configuration you need to do for all projects.
For a project to use this plugin, you need to enable it in the project configuration page. In the Post-build Actions section, click on Add post-build action and then select Editable Email Notification.
There are three main fields that you can edit when this plugin is enabled:
- Project Recipient List
-
This is a comma (or whitespace) separated list of email recipients. Allows you to specify a single recipient list for each email that is sent.
- Default Subject
-
This allows you to configure a token (more about tokens later) that can be used to easily configure all email subjects for the project.
- Default Content
-
Same as Default Subject, but for the email body instead of the subject.
emailext body: 'Test Message',
subject: 'Test Subject',
to: '[email protected]'Use the recipientProviders parameter to add additional recipients.
For example, to add all the people who caused a change in the change set and the user who initiated the build:
emailext body: 'Test Message',
recipientProviders: [developers(), requestor()],
subject: 'Test Subject',
to: '[email protected]'The recipient providers from this plugin can also be used with the Mailer plugin. For example, to add culprits and the user who initiated the build:
step([$class: 'Mailer',
notifyEveryUnstableBuild: true,
recipients: emailextrecipients([culprits(), requestor()])])To see the advanced configuration for this plugin, click on the Advanced button. This section allows you to specify recipients for each type of email trigger as well as a pre-send script that can be used to modify the email prior to sending.
This feature allows you to write a script that can modify the MimeMessage object before or after sending the email.
This allows adding custom headers, modifying the body, etc.
Predefined variables include:
msg(javax.mail.internet.MimeMessage)-
The MIME email message object, which can be modified.
logger(java.io.PrintStream)-
A
PrintStreamthat can be used to log messages to the build log. build(hudson.model.AbstractBuild)-
The build this message belongs to (only use with Freestyle projects).
run(hudson.model.Run)-
The build this message belongs to (may be used with Freestyle projects or Pipeline).
cancel(boolean)-
When set to true, cancels the sending of the email.
By default, the only trigger configured is the Failure - Any trigger. To add more triggers, select one from the drop-down and it will be added to the list. To see what conditions must be met for this plugin to send an email, click on the "?" (question mark) next to the trigger.
The following triggers are available as part of the Extended Email Publisher plugin, other plugins can provide triggers as well through the extension point defined in the Extended Email Publisher:
- Aborted
-
An email will be sent if the build status is "Aborted". A build is aborted via the UI or API, but normally requires some sort of user intervention to occur. An aborted build is stopped during its execution.
- Always
-
Always triggers an email after the build, regardless of the status of the build.
- Before Build
-
An email will be sent when the build begins, but after SCM polling has completed.
- Failure → Unstable (Test Failures)
-
An email will be sent any time the build goes from failing (compilation or build step failures), to unstable (unit test failures). This basically means that all the builds steps were successful, but there are still tests failing.
- Failure - Any
-
An email will be sent any time the build fails. If the "Failure - Still" trigger is configured, and the previous build status was "Failure", then the "Failure - Still" trigger will send an email instead.
- Failure - 1st
-
An email will be sent when the build status changes from "Success" to "Failure".
- Failure - 2nd
-
An email will be sent when the build fails twice in a row after a successful build.
- Failure - Still
-
An email will be sent if the build status is "Failure" for two or more builds in a row.
- Failure - X
-
An email will be sent when the build fails X times in a row after a successful build
- Fixed
-
An email will be sent when the build status changes from "Failure" or "Unstable" to "Success".
- Not Built
-
An email will be sent if the build status is "Not Built". This status code is used in a multi-stage build (like maven2) where a problem in earlier stage prevented later stages from building.
- Script - After Build
-
Allows the user to define a script that is executed to determine if an email should be sent AFTER the build occurs. The last line of the script should resolve to true to send an email, or false to not send an email. See Script Trigger Options below for parameters available to the script.
- Script - Before Build
-
Allows the user to define a script that is executed to determine if an email should be sent BEFORE the build occurs. The last line of the script should resolve to true to send an email, or false to not send an email. See Script Trigger Options below for parameters available to the script.
- Status Changed
-
An email will be sent if the build status changes.
- Success
-
An email will be sent if the build status is "Successful". If the "Fixed" trigger is configured, and the previous build status was "Failure" or "Unstable", then the "Fixed" trigger will send an email instead.
- Test Improvement
-
An email will be sent any time there is an improvement. A build is considered to have improved whenever it has fewer test failures than the previous build. If the current failure count went to 0 (no more test failures) this trigger will NOT send an email.
- Test Regression
-
An email will be sent any time there is a regression. A build is considered to regress whenever it has more failures than the previous build, or if there are new tests that failed.
- Unstable (Test Failures)
-
An email will be sent any time the build is unstable. A build is unstable if there are test failures, but all the build steps completed successfully. If the "Unstable - Still" trigger is configured, and the previous build status was "Unstable", then the "Unstable - Still" trigger will send an email instead.
- Unstable (Test Failures) - 1st
-
An email will be sent when the build status changes from anything to "Unstable".
- Unstable (Test Failures) - Still
-
An email will be sent if the build status is "Unstable" for two or more builds in a row. A build is unstable if there are test failures, but all the build steps completed successfully.
- Unstable (Test Failures)/Failure → Success
-
An email will be sent when the build status changes from "Failure" or "Unstable" to "Success". Intermediate "Aborted" builds are ignored.
Once you have added a trigger, you have several common options (there may be additional options available depending on the trigger implementation):
- Recipient List
-
Add this recipient provider if you would like to have the email sent to the Project Recipient List configured above.
- Developers
-
Add this recipient provider to send the email to anyone who checked in code for the last build. This plugin will generate an email address based on the committer’s ID and an appended Default user e-mail suffix from the Extended E-mail Notification section of the Configure System page. For example, if a change was committed by someone with an ID of
first.last, and the default user e-mail suffix is@example.com, then an email will be sent to[email protected]. - Requestor
-
Add this recipient provider to send an email to the user who initiated the build (if initiated by a user manually).
- Include Culprits
-
If this recipient provider and the Developers recipient provider are added, emails will include everyone who committed since the last successful build.
- Advanced
-
Configure properties at a per-trigger level:
- Recipient List
-
A comma (or whitespace) separated list of email address that should receive this email if it is triggered. This list is appended to the Project Recipient List described above.
- Subject
-
Specify the subject line of the selected email.
- Content
-
Specify the body of the selected email.
You can also add Script - After Build or Script - Before Build triggers to a project to use Groovy scripts to define before or after the build whether or not the email will be sent. The script is defined in the Groovy Script section of the trigger. There are four objects added to the model for the script to use to interact with the build:
out(java.io.PrintStream)-
A
PrintStreamthat can be used to log messages to the build log. build(hudson.model.AbstractBuild)-
This is the current build, usually a subclass of
AbstractBuild. project(hudson.model.AbstractProject)-
The project object that the current build was started from, usually a subclass of
AbstractProject. rooturl(String)-
The Jenkins instance root URL, useful for links.
The last line in the script should resolve to a boolean (true or false):
// this could be used to notify people that a new build is happening
build.previousBuild.result.toString().equals('FAILURE')// only send am email if the build failed and 'mickeymouse' had a commit
build.result.toString().equals('FAILURE') && build.hasParticipant(User.get('mickeymouse'))// only send an email if the word {{ERROR}} is found in build logs
build.logFile.text.readLines().any { it =~ /.*ERROR.*/ }This plugin uses tokens to allow dynamic data to be inserted into recipient list, subject line, or body.
A token is a string that starts with a $ (dollar sign) and is terminated by whitespace.
When an email is triggered, a token in the subject or content fields will be replaced dynamically by the actual value that it represents.
Also, the value of a token can contain other tokens that will themselves be replaced by actual content.
For instance, the $DEFAULT_SUBJECT token is replaced by the text (and other tokens) that is in the Default Subject field from the Extended E-mail Notification section of the Configure System page.
Similarly, the $PROJECT_DEFAULT_SUBJECT token will be replaced by the value of the Default Subject field from the project configuration page.
This plugin sets the email content fields with default values when you enable it for your project.
The Default Subject and Default Content fields on the project configuration page default to $DEFAULT_SUBJECT and $DEFAULT_CONTENT (respectively), delegating to the the system-wide configuration from the Extended E-mail Notification section of the Configure System page.
Similarly, the per-trigger content fields default to $PROJECT_DEFAULT_SUBJECT and $PROJECT_DEFAULT_CONTENT, delegating to the project’s configuration.
Since the value of a token can contain other tokens, this provides different points of configuration that can allow you to quickly make changes at the broadest level (all projects), the narrowest level (individual emails), and in-between (individual projects).
To see a list of all available email tokens and what they display, click on the "?" (question mark) associated with the Content Token Reference in the Editable Email Notification section of the project configuration page.
As of version 2.22, this plugin also supports tokens provided by the Token Macro plugin. You can see the available Token Macro Plugin Tokens below the Extended Email Publisher Specific Tokens when you click on the "?" (question mark) associated with the Content Token Reference in the Editable Email Notification section of the project configuration page.
New to version 2.9 is the ability to use Jelly scripts. Jelly scripts are powerful in that you can hook into the Jenkins API to get any information you want or need. Two Jelly scripts are packaged with this plugin, and it is also possible to write your own.
There are two default Jelly scripts available out of the box; one is designed for HTML emails, and the other is designed for text emails.
See the screenshots below for what these templates look like.
You can specify which script you want by using the template argument.
The usage for each type of script is as follows:
- Text-only Jelly script
-
${JELLY_SCRIPT,template="text"} - HTML Jelly script
-
${JELLY_SCRIPT,template="html"}
You can also write your own Jelly scripts.
The Jelly scripts are particularly powerful since they provide a hook into the Jenkins API, including hudson.model.AbstractBuild and hudson.model.AbstractProject.
For an example on how to do this, take a look at the existing html and text scripts.
Using custom Jelly scripts (those not packaged with this plugin) requires the cooperation of your Jenkins administrator. The steps are relatively simple:
-
Create the Jelly script template. The name of the script should be
<name>.jelly.❗It is important that the name ends in .jelly. -
Have your Jenkins administrator place the script inside
${JENKINS_HOME}/email-templates/. -
Use the
$JELLY_SCRIPTtoken with thetemplateparameter equal to your script filename without the.jellyextension. For example, if the script filename isfoobar.jelly, the email content would be${JELLY_SCRIPT,template="foobar"}.
|
💡
|
|
New to version 2.15 is the ability to use Groovy scripts. Scripts are powerful in that you can hook into the Jenkins API to get any information you want or need. There are two scripts with corresponding templates packaged with this plugin, and it is also possible to write your own.
There are two default scripts and templates available out of the box; one is designed for HTML emails and the other is design for text emails.
You can specify which script you want by using the script argument; you can also leave the default script and specify a different template file using the template argument.
Furthermore, you can also include a script that does some initialization using the init argument.
The usage for each type of script is as follows:
- Text-only Groovy script
-
${SCRIPT, template="groovy-text.template"} - HTML Groovy script
-
${SCRIPT, template="groovy-html.template"}
You can also write your own scripts and templates.
The scripts are particularly powerful since they provide a hook into the Jenkins API, including hudson.model.AbstractBuild and hudson.model.AbstractProject.
For an example on how to do this, take a look at the existing html and text scripts.
Using custom scripts (those not packaged with this plugin) requires the cooperation of your Jenkins administrator. The steps are relatively simple:
-
Create the Groovy script template. The name of the script ends in the standard extension for the language (i.e.,
.groovy). The template can be named anything. -
Have your Jenkins administrator place the script inside
${JENKINS_HOME}/email-templates/. -
Use the
$SCRIPTtoken with the template parameter equal to your template filename, or in addition the script parameter equal to the custom script name. For example, if the template filename isfoobar.template, the email content would be${SCRIPT, template="foobar.template"}.
Refer to the following examples for doing various things with the built-in Groovy templates:
New to version 2.15 is the ability to add attachments using the Ant pattern matching syntax used in many places in Jenkins. You can set a maximum total attachment size in the Extended E-mail Notification section of the Configure System page; otherwise, it will be unlimited.
jive-formatter.groovy contains methods for easy and convenient formatting of emails being sent from Jenkins to Jive.
It should be called from the Pre-send Script area.
|
🔥
|
Jive does not appear to support text with multiple formats, so only call one formatting method per block of text. |
Either formatLine or formatText can and should be called on every line of text that will be sent to the Jive system prior to calling formatting methods like color or size.
Please test on your own instances of Jive and add functionality as you find it!
The following lines should be added to the Pre-send Script area prior to attempting to invoke any functions:
File sourceFile = new File("/your/preferred/path/jive-formatter.groovy");
Class groovyClass = new GroovyClassLoader(getClass().getClassLoader()).parseClass(sourceFile);
GroovyObject jiveFormatter = (GroovyObject) groovyClass.newInstance();