Arkenswoop

A WIP fork of jimmerricks's Swoop, which is a fork of David Barr's Sweep, which is itself based on the fabulous Ferris by Pierre Chevalier.

Front	Back

Features

⭕ Low profile Kailh Choc switches
⭕ Hotswap
⭕ Dual side-scrolling encoder
⭕ Oled screens
⭕ Power switch for battery management
⭕ Bluetooth support w/ nice!nano
⭕ Plate style case with mcu cover

Components list

To build and use an Arkenswoop you will need:

• 1× PCB Kit (1.6mm thickness when ordering)
• 1× back plate kit (optional, 1.2mm thickness when ordering)
• 2× promicro compatible boards or 2 nice!nanos.
• 34× Kailh Choc v1 switches
• 34× Kailh Choc hotswap sockets (PG1350)
• 34× keycaps
• 2× side-scrolling encoders EVQWGD001
• 2× OLED LCD Display 128x32 SSD1306 (optional)
• 2× MCU cover (optional, 1mm thickness when ordering)
• 2× reset switches (optional; B3U-1000P(M))
• Some little rubber feet/bumpers (minimum of 4 on each side)
• 2× power switches (wireless only; MSK 12C02)
• 2× lipo batteries (wireless only; 301230 or 301228)
• 1× TRRS (not TRS!) cable (wired only)
• 2× TRRS Jack [PJ-320A] (wired only)
• 1× USB Cable (depends on your micro-controller choice)

Images

Assembled Arkenswoop 0.6.0

Back of assembled Arkenswoop 0.6.0

Altenswoop

An Arkenswoop inspired keyboard with a twist: the Z and / keys are moved to the side.

Front	Back

Features

⭕ Low profile Kailh Choc switches
⭕ Hotswap
⭕ Dual side-scrolling encoder
⭕ Oled screens
⭕ Power switch for battery management
⭕ Bluetooth support w/ nice!nano
⭕ Plate style case with mcu cover

Components list

To build and use an Altenswoop you will need:

• 1× PCB Kit (1.6mm thickness when ordering)
• 1× back plate kit (optional, 1.2mm thickness when ordering)
• 2× promicro compatible boards or 2 nice!nanos.
• 34× Kailh Choc v1 switches
• 34× Kailh Choc hotswap sockets (PG1350)
• 34× keycaps
• 2× side-scrolling encoders EVQWGD001
• 2× OLED LCD Display 128x32 SSD1306 (optional)
• 2× MCU cover (optional, 1mm thickness when ordering)
• 2× reset switches (optional; B3U-1000P(M))
• Some little rubber feet/bumpers (minimum of 4 on each side)
• 2× power switches (wireless only; MSK 12C02)
• 2× lipo batteries (wireless only; 301230 or 301228)
• 1× TRRS (not TRS!) cable (wired only)
• 2× TRRS Jack [PJ-320A] (wired only)
• 1× USB Cable (depends on your micro-controller choice)